[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <CAOMZO5BToV0OKEc_f8M1=zSL-X=qSXnokFyEfEEX2tGTUO=a-A@mail.gmail.com>
Date: Wed, 31 Jan 2018 14:20:31 -0200
From: Fabio Estevam <festevam@...il.com>
To: Daniel Baluta <daniel.baluta@....com>
Cc: Mark Brown <broonie@...nel.org>, alsa-devel@...a-project.org,
"open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS"
<devicetree@...r.kernel.org>,
linux-kernel <linux-kernel@...r.kernel.org>,
wakasugi.jb@...asahi-kasei.co.jp, shengjiu.wang@....com,
mihai.serban@...il.com, cosmin.samoila@....com, linux-imx@....com,
Mihai Serban <mihai.serban@....com>
Subject: Re: [PATCH] ASoC: codecs: Add support for AK5558 ADC driver
Hi Daniel,
On Wed, Jan 31, 2018 at 10:57 AM, Daniel Baluta <daniel.baluta@....com> wrote:
> AK5558 is a 32-bit, 768 kHZ sampling, differential input ADC
> for digital audio systems.
>
> Datasheet is available at:
>
> https://www.akm.com/akm/en/file/datasheet/AK5558VN.pdf
>
> Initial patch includes support for normal and TDM modes.
>
> Signed-off-by: Junichi Wakasugi <wakasugi.jb@...asahi-kasei.co.jp>
> Signed-off-by: Mihai Serban <mihai.serban@....com>
> Signed-off-by: Shengjiu Wang <shengjiu.wang@....com>
> Signed-off-by: Daniel Baluta <daniel.baluta@....com>
> ---
> Documentation/devicetree/bindings/sound/ak5558.txt | 20 +
> sound/soc/codecs/Kconfig | 6 +
> sound/soc/codecs/Makefile | 2 +
> sound/soc/codecs/ak5558.c | 754 +++++++++++++++++++++
> sound/soc/codecs/ak5558.h | 60 ++
> 5 files changed, 842 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/sound/ak5558.txt
Maybe you should split this is as a separate patch and send it to dt
maintainer for review.
> create mode 100644 sound/soc/codecs/ak5558.c
> create mode 100644 sound/soc/codecs/ak5558.h
>
> diff --git a/Documentation/devicetree/bindings/sound/ak5558.txt b/Documentation/devicetree/bindings/sound/ak5558.txt
> new file mode 100644
> index 0000000..c6c71af
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/sound/ak5558.txt
> @@ -0,0 +1,20 @@
> +AK5558 8 channel differential 32-bit delta-sigma ADC
> +
> +This device supports I2C mode only.
> +
> +Required properties:
> +
> +- compatible : "asahi-kasei,ak5558"
> +- reg : The I2C address of the device for I2C.
> +- asahi-kasei,pdn-gpios: A GPIO specifier for the GPIO controlling
> + the power down & reset pin.
> +
> +Example:
> +
> +&i2c {
> + ak5558: ak5558@10 {
> + compatible = "asahi-kasei,ak5558";
> + reg = <0x10>;
> + asahi-kasei,pdn-gpios = <&gpio1 10 GPIO_ACTIVE_HIGH>;
Datasheet says it is active low.
The driver seems to ignore the GPIO polarity, but device tree should
represent the hardware correctly.
Better switch the driver to use gpiod API.
> --- /dev/null
> +++ b/sound/soc/codecs/ak5558.c
> @@ -0,0 +1,754 @@
> +/*
> + * ak5558.c -- audio driver for AK5558 ADC
> + *
> + * Copyright (C) 2015 Asahi Kasei Microdevices Corporation
> + * Copyright 2018 NXP
> + *
> + * This software is licensed under the terms of the GNU General Public
> + * License version 2, as published by the Free Software Foundation, and
> + * may be copied, distributed, and modified under those terms.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + * GNU General Public License for more details.
You could use SPDX identifier and get rid of the license text.
> + */
> +
> +#include <linux/module.h>
> +#include <linux/init.h>
> +#include <linux/i2c.h>
> +#include <linux/delay.h>
> +#include <linux/slab.h>
> +#include <linux/gpio/consumer.h>
> +#include <sound/soc.h>
> +#include <sound/soc-dapm.h>
> +#include <sound/pcm.h>
> +#include <sound/pcm_params.h>
> +#include <sound/initval.h>
> +#include <sound/tlv.h>
> +#include <linux/of_gpio.h>
> +#include <linux/regmap.h>
> +#include <linux/pm_runtime.h>
> +
> +#include "ak5558.h"
> +
> +#define AK5558_SLAVE_CKS_AUTO
Why is this define needed?
> +
> +static int ak5558_set_mcki(struct snd_soc_codec *codec, int fs, int rclk)
> +{
> + u8 mode;
> +#ifndef AK5558_SLAVE_CKS_AUTO
> + int mcki_rate;
> +#endif
You could drop this variable as AK5558_SLAVE_CKS_AUTO seems to be
always defined.
Then maybe you could remove mcki_rate and AK5558_SLAVE_CKS_AUTO.
> +static int ak5558_startup(struct snd_pcm_substream *substream,
> + struct snd_soc_dai *dai)
> +{
> + int ret;
> +
> + ret = snd_pcm_hw_constraint_list(substream->runtime, 0,
> + SNDRV_PCM_HW_PARAM_RATE,
> + &ak5558_rate_constraints);
> + return ret;
You could simply return directly without using the variable 'ret'.
> +static int ak5558_init_reg(struct snd_soc_codec *codec)
> +{
> + int ret;
> + struct ak5558_priv *ak5558 = snd_soc_codec_get_drvdata(codec);
> +
> + dev_dbg(codec->dev, "%s(%d)\n", __func__, __LINE__);
> +
> + usleep_range(10000, 11000);
> + if (gpio_is_valid(ak5558->pdn_gpio)) {
> + gpio_set_value_cansleep(ak5558->pdn_gpio, 0);
> + usleep_range(1000, 2000);
> + gpio_set_value_cansleep(ak5558->pdn_gpio, 1);
Here the GPIO polarity is hardcoded, which can cause issues in systems
that has an inverter in this GPIO line.
One more generic approach would be to use gpiod_set_value_cansleep()
instead, which takes the GPIO polarity read from device tree.
> +static int ak5558_probe(struct snd_soc_codec *codec)
> +{
> + struct ak5558_priv *ak5558 = snd_soc_codec_get_drvdata(codec);
> + int ret = 0;
> +
> + dev_dbg(codec->dev, "%s(%d)\n", __func__, __LINE__);
Better to remove such dev_dbg() lines.
> +static int ak5558_i2c_probe(struct i2c_client *i2c,
> + const struct i2c_device_id *id)
> +{
> + struct device_node *np = i2c->dev.of_node;
> + struct ak5558_priv *ak5558;
> + int ret = 0;
> +
> + dev_err(&i2c->dev, "%s(%d)\n", __func__, __LINE__);
You certainly do not want an error message on every probe :-)
> + ak5558 = devm_kzalloc(&i2c->dev, sizeof(struct ak5558_priv),
> + GFP_KERNEL);
> + if (!ak5558)
> + return -ENOMEM;
> +
> + ak5558->regmap = devm_regmap_init_i2c(i2c, &ak5558_regmap);
> + if (IS_ERR(ak5558->regmap))
> + return PTR_ERR(ak5558->regmap);
> +
> + i2c_set_clientdata(i2c, ak5558);
> + ak5558->i2c = i2c;
> +
> + ak5558->pdn_gpio = of_get_named_gpio(np, "ak5558,pdn-gpio", 0);
It does not match the property in the binding doc: asahi-kasei,pdn-gpios
> +module_i2c_driver(ak5558_i2c_driver);
> +
> +MODULE_AUTHOR("Junichi Wakasugi <wakasugi.jb@...asahi-kasei.co.jp>");
> +MODULE_AUTHOR("Mihai Serban <mihai.serban@....com>");
> +MODULE_DESCRIPTION("ASoC AK5558 ADC driver");
> +MODULE_LICENSE("GPL");
Don't you mean MODULE_LICENSE("GPL v2") instead?
Powered by blists - more mailing lists