[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20180201075720.3fj7ozvclpp6yovz@pengutronix.de>
Date: Thu, 1 Feb 2018 08:57:20 +0100
From: Uwe Kleine-König
<u.kleine-koenig@...gutronix.de>
To: Benoît Thébaudeau
<benoit.thebaudeau.dev@...il.com>
Cc: linux-kernel@...r.kernel.org, devicetree@...r.kernel.org,
linux-arm-kernel@...ts.infradead.org,
Russell King <linux@...linux.org.uk>,
Mark Rutland <mark.rutland@....com>,
Rob Herring <robh+dt@...nel.org>,
Fabio Estevam <fabio.estevam@....com>,
Sascha Hauer <kernel@...gutronix.de>,
Shawn Guo <shawnguo@...nel.org>,
Michael Nazzareno Trimarchi <michael@...rulasolutions.com>
Subject: Re: [PATCH v3 2/2] ARM: dts: imx25-pinfunc: Always set SION for
eSDHC CMD
On Wed, Jan 31, 2018 at 10:35:44PM +0100, Benoît Thébaudeau wrote:
> The eSDHC does not work properly if the SION bit is not set for the
> bidirectional CMD signal, whatever the eSDHC instance and the selected
> pad. Therefore, setting SION is mandatory for all eSDHC CMD ports. Do
> this for MX25_PAD_*__ESDHCn_CMD in imx25-pinfunc.h in order to enforce
> this behavior for all boards.
>
> This had already been done for eSDHC1, but not for eSDHC2. Also, define
> MX25_PAD_FEC_MDC__ESDHC2_CMD so that all the possible cases are covered
> from now on.
>
> Cc: Uwe Kleine-König <u.kleine-koenig@...gutronix.de>
> Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau.dev@...il.com>
> Reviewed-by: Fabio Estevam <fabio.estevam@....com>
Acked-by: Uwe Kleine-König <u.kleine-koenig@...gutronix.de>
Thanks
Uwe
--
Pengutronix e.K. | Uwe Kleine-König |
Industrial Linux Solutions | http://www.pengutronix.de/ |
Powered by blists - more mailing lists