linux-kernel - Re: [PATCH v3 2/2] ARM: dts: imx25-pinfunc: Always set SION for eSDHC CMD

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite for Android: free password hash cracker in your pocket

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <20180205034929.tdd22buxaigufo6y@rob-hp-laptop>
Date:   Mon, 5 Feb 2018 00:08:59 -0600
From:   Rob Herring <robh@...nel.org>
To:     Benoît Thébaudeau 
        <benoit.thebaudeau.dev@...il.com>
Cc:     linux-kernel@...r.kernel.org, devicetree@...r.kernel.org,
        linux-arm-kernel@...ts.infradead.org,
        Russell King <linux@...linux.org.uk>,
        Mark Rutland <mark.rutland@....com>,
        Fabio Estevam <fabio.estevam@....com>,
        Sascha Hauer <kernel@...gutronix.de>,
        Shawn Guo <shawnguo@...nel.org>,
        Uwe Kleine-König 
        <u.kleine-koenig@...gutronix.de>,
        Michael Nazzareno Trimarchi <michael@...rulasolutions.com>
Subject: Re: [PATCH v3 2/2] ARM: dts: imx25-pinfunc: Always set SION for
 eSDHC CMD

On Wed, Jan 31, 2018 at 10:35:44PM +0100, Benoît Thébaudeau wrote:
> The eSDHC does not work properly if the SION bit is not set for the
> bidirectional CMD signal, whatever the eSDHC instance and the selected
> pad. Therefore, setting SION is mandatory for all eSDHC CMD ports. Do
> this for MX25_PAD_*__ESDHCn_CMD in imx25-pinfunc.h in order to enforce
> this behavior for all boards.
> 
> This had already been done for eSDHC1, but not for eSDHC2. Also, define
> MX25_PAD_FEC_MDC__ESDHC2_CMD so that all the possible cases are covered
> from now on.
> 
> Cc: Uwe Kleine-König <u.kleine-koenig@...gutronix.de>
> Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau.dev@...il.com>
> Reviewed-by: Fabio Estevam <fabio.estevam@....com>
> ---
> Changes v2 -> v3:
>  - Quickly mention SION in each comment, besides the reference to the
>    verbose comment (suggested by Uwe).
> Changes v1 -> v2:
>  - Update eSDHC instance and port naming following the addition of "ARM:
>    dts: imx25-pinfunc: Use consistent naming for eSDHC".
>  - Reference the more verbose comment for MX25_PAD_SD1_CMD__ESDHC1_CMD
>    instead of copying the same less detailed comment everywhere
>    (suggested by Uwe).
> ---
>  arch/arm/boot/dts/imx25-pinfunc.h | 18 +++++++++++-------
>  1 file changed, 11 insertions(+), 7 deletions(-)

Reviewed-by: Rob Herring <robh@...nel.org>