| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20180204093706.GA26184@hao-dev>
Date: Sun, 4 Feb 2018 17:37:06 +0800
From: Wu Hao <hao.wu@...el.com>
To: "Luebbers, Enno" <enno.luebbers@...el.com>
Cc: Alan Tull <atull@...nel.org>, Moritz Fischer <mdf@...nel.org>,
linux-fpga@...r.kernel.org,
linux-kernel <linux-kernel@...r.kernel.org>,
linux-api@...r.kernel.org, "Kang, Luwei" <luwei.kang@...el.com>,
"Zhang, Yi Z" <yi.z.zhang@...el.com>,
Tim Whisonant <tim.whisonant@...el.com>,
Shiva Rao <shiva.rao@...el.com>,
Christopher Rauer <christopher.rauer@...el.com>,
Xiao Guangrong <guangrong.xiao@...ux.intel.com>
Subject: Re: [PATCH v3 14/21] fpga: dfl: add fpga manager platform driver for
FME
On Fri, Feb 02, 2018 at 04:26:26PM -0800, Luebbers, Enno wrote:
> Hi Hao, Alan,
>
> On Fri, Feb 02, 2018 at 05:42:13PM +0800, Wu Hao wrote:
> > On Thu, Feb 01, 2018 at 04:00:36PM -0600, Alan Tull wrote:
> > > On Mon, Nov 27, 2017 at 12:42 AM, Wu Hao <hao.wu@...el.com> wrote:
> > >
> > > Hi Hao,
> > >
> > > A few comments below. Besides that, looks good.
> > >
> > > > This patch adds fpga manager driver for FPGA Management Engine (FME). It
> > > > implements fpga_manager_ops for FPGA Partial Reconfiguration function.
> > > >
> > > > Signed-off-by: Tim Whisonant <tim.whisonant@...el.com>
> > > > Signed-off-by: Enno Luebbers <enno.luebbers@...el.com>
> > > > Signed-off-by: Shiva Rao <shiva.rao@...el.com>
> > > > Signed-off-by: Christopher Rauer <christopher.rauer@...el.com>
> > > > Signed-off-by: Kang Luwei <luwei.kang@...el.com>
> > > > Signed-off-by: Xiao Guangrong <guangrong.xiao@...ux.intel.com>
> > > > Signed-off-by: Wu Hao <hao.wu@...el.com>
> > > > ----
> > > > v3: rename driver to dfl-fpga-fme-mgr
> > > > implemented status callback for fpga manager
> > > > rebased due to fpga api changes
> > > > ---
> > > > .../ABI/testing/sysfs-platform-fpga-dfl-fme-mgr | 8 +
> > > > drivers/fpga/Kconfig | 6 +
> > > > drivers/fpga/Makefile | 1 +
> > > > drivers/fpga/fpga-dfl-fme-mgr.c | 318 +++++++++++++++++++++
> > > > drivers/fpga/fpga-dfl.h | 39 ++-
> > > > 5 files changed, 371 insertions(+), 1 deletion(-)
> > > > create mode 100644 Documentation/ABI/testing/sysfs-platform-fpga-dfl-fme-mgr
> > > > create mode 100644 drivers/fpga/fpga-dfl-fme-mgr.c
> > > >
> > > > diff --git a/Documentation/ABI/testing/sysfs-platform-fpga-dfl-fme-mgr b/Documentation/ABI/testing/sysfs-platform-fpga-dfl-fme-mgr
> > > > new file mode 100644
> > > > index 0000000..2d4f917
> > > > --- /dev/null
> > > > +++ b/Documentation/ABI/testing/sysfs-platform-fpga-dfl-fme-mgr
> > > > @@ -0,0 +1,8 @@
> > > > +What: /sys/bus/platform/devices/fpga-dfl-fme-mgr.0/interface_id
> > > > +Date: November 2017
> > > > +KernelVersion: 4.15
> > > > +Contact: Wu Hao <hao.wu@...el.com>
> > > > +Description: Read-only. It returns interface id of partial reconfiguration
> > > > + hardware. Userspace could use this information to check if
> > > > + current hardware is compatible with given image before FPGA
> > > > + programming.
> > >
> > > I'm a little confused by this. I can understand that the PR bitstream
> > > has a dependency on the FPGA's static image, but I don't understand
> > > the dependency of the bistream on the hardware that is used to program
> > > the bitstream to the FPGA.
> >
> > Sorry for the confusion, the interface_id is used to indicate the version of
> > the hardware for partial reconfiguration (it's part of the static image of
> > the FPGA device). Will improve the description on this.
> >
>
> The interface_id expresses the compatibility of the static region with PR
> bitstreams generated for it. It changes every time a new static region is
> generated.
>
> Would it make more sense to have the interface_id exposed as part of the FME
> device (which represents the static region)? I'm not sure - it kind of also
> makes sense here, where you would have all the information in one place (if the
> interface_id matches, I can use this component to program a bitstream).
Hi Enno
Yes, this interface is under fpga-dfl-fme-mgr.0, and fpga-dfl-fme-mgr.0 is
under fpga-dfl-fme.0. It's part of the FME device for sure. From another
point of view, it means if anyone wants to do PR on this Intel FPGA device,
he needs to find the FME device firstly, and then check if any fpga manager
created under this FME device, if yes, check the interface_id before PR via
the FME device node ioctl.
>
> Sorry for my limited understanding of the infrastructure - would this same
> "fpga-dfl-fme-mgr.0" be used for PR if we had multiple PR regions? In that case
> it would need to expose multiple interface_ids (or we'd have to track both
> interface IDs and an identifier for the target PR region).
Yes, the fpga manager could be shared with different PR regions.
Sorry, I'm not sure where we need to expose multiple interface_ids and why.
Thanks
Hao
>
> > >
> > > > diff --git a/drivers/fpga/Kconfig b/drivers/fpga/Kconfig
> > > > index 57da904..0171ecb 100644
> > > > --- a/drivers/fpga/Kconfig
> > > > +++ b/drivers/fpga/Kconfig
> > > > @@ -150,6 +150,12 @@ config FPGA_DFL_FME
> > > > FPGA platform level management features. There shall be 1 FME
> > > > per DFL based FPGA device.
> > > >
> > > > +config FPGA_DFL_FME_MGR
> > > > + tristate "FPGA DFL FME Manager Driver"
> > > > + depends on FPGA_DFL_FME
> > > > + help
> > > > + Say Y to enable FPGA Manager driver for FPGA Management Engine.
> > > > +
> > > > config INTEL_FPGA_DFL_PCI
> > > > tristate "Intel FPGA DFL PCIe Device Driver"
> > > > depends on PCI && FPGA_DFL
> > > > diff --git a/drivers/fpga/Makefile b/drivers/fpga/Makefile
> > > > index cc75bb3..6378580 100644
> > > > --- a/drivers/fpga/Makefile
> > > > +++ b/drivers/fpga/Makefile
> > > > @@ -31,6 +31,7 @@ obj-$(CONFIG_OF_FPGA_REGION) += of-fpga-region.o
> > > > # FPGA Device Feature List Support
> > > > obj-$(CONFIG_FPGA_DFL) += fpga-dfl.o
> > > > obj-$(CONFIG_FPGA_DFL_FME) += fpga-dfl-fme.o
> > > > +obj-$(CONFIG_FPGA_DFL_FME_MGR) += fpga-dfl-fme-mgr.o
> > > >
> > > > fpga-dfl-fme-objs := dfl-fme-main.o dfl-fme-pr.o
> > > >
> > > > diff --git a/drivers/fpga/fpga-dfl-fme-mgr.c b/drivers/fpga/fpga-dfl-fme-mgr.c
> > > > new file mode 100644
> > > > index 0000000..70356ce
> > > > --- /dev/null
> > > > +++ b/drivers/fpga/fpga-dfl-fme-mgr.c
> > > > @@ -0,0 +1,318 @@
> > > > +/*
> > > > + * FPGA Manager Driver for FPGA Management Engine (FME)
> > > > + *
> > > > + * Copyright (C) 2017 Intel Corporation, Inc.
> > > > + *
> > > > + * Authors:
> > > > + * Kang Luwei <luwei.kang@...el.com>
> > > > + * Xiao Guangrong <guangrong.xiao@...ux.intel.com>
> > > > + * Wu Hao <hao.wu@...el.com>
> > > > + * Joseph Grecco <joe.grecco@...el.com>
> > > > + * Enno Luebbers <enno.luebbers@...el.com>
> > > > + * Tim Whisonant <tim.whisonant@...el.com>
> > > > + * Ananda Ravuri <ananda.ravuri@...el.com>
> > > > + * Christopher Rauer <christopher.rauer@...el.com>
> > > > + * Henry Mitchel <henry.mitchel@...el.com>
> > > > + *
> > > > + * This work is licensed under the terms of the GNU GPL version 2.
> > > > + * SPDX-License-Identifier: GPL-2.0
> > > > + */
> > > > +
> > > > +#include <linux/module.h>
> > > > +#include <linux/iopoll.h>
> > > > +#include <linux/fpga/fpga-mgr.h>
> > > > +
> > > > +#include "fpga-dfl.h"
> > > > +#include "dfl-fme.h"
> > > > +
> > > > +#define PR_WAIT_TIMEOUT 8000000
> > > > +#define PR_HOST_STATUS_IDLE 0
> > > > +
> > > > +struct fme_mgr_priv {
> > > > + void __iomem *ioaddr;
> > > > + u64 pr_error;
> > > > +};
> > > > +
> > > > +static ssize_t interface_id_show(struct device *dev,
> > > > + struct device_attribute *attr, char *buf)
> > > > +{
> > > > + struct fpga_manager *mgr = dev_get_drvdata(dev);
> > > > + struct fme_mgr_priv *priv = mgr->priv;
> > > > + u64 intfc_id_l, intfc_id_h;
> > > > +
> > > > + intfc_id_l = readq(priv->ioaddr + FME_PR_INTFC_ID_L);
> > > > + intfc_id_h = readq(priv->ioaddr + FME_PR_INTFC_ID_H);
> > > > +
> > > > + return scnprintf(buf, PAGE_SIZE, "%016llx%016llx\n",
> > > > + (unsigned long long)intfc_id_h,
> > > > + (unsigned long long)intfc_id_l);
> > > > +}
> > > > +static DEVICE_ATTR_RO(interface_id);
> > > > +
> > > > +static const struct attribute *fme_mgr_attrs[] = {
> > > > + &dev_attr_interface_id.attr,
> > > > + NULL,
> > > > +};
> > > > +
> > > > +static u64 pr_error_to_mgr_status(u64 err)
> > > > +{
> > > > + u64 status = 0;
> > > > +
> > > > + if (err & FME_PR_ERR_OPERATION_ERR)
> > > > + status |= FPGA_MGR_STATUS_OPERATION_ERR;
> > > > + if (err & FME_PR_ERR_CRC_ERR)
> > > > + status |= FPGA_MGR_STATUS_CRC_ERR;
> > > > + if (err & FME_PR_ERR_INCOMPATIBLE_BS)
> > > > + status |= FPGA_MGR_STATUS_INCOMPATIBLE_IMAGE_ERR;
> > > > + if (err & FME_PR_ERR_PROTOCOL_ERR)
> > > > + status |= FPGA_MGR_STATUS_IP_PROTOCOL_ERR;
> > > > + if (err & FME_PR_ERR_FIFO_OVERFLOW)
> > > > + status |= FPGA_MGR_STATUS_FIFO_OVERFLOW_ERR;
> > > > +
> > > > + return status;
> > > > +}
> > > > +
> > > > +static u64 fme_mgr_pr_error_handle(void __iomem *fme_pr)
> > > > +{
> > > > + u64 pr_status, pr_error;
> > > > +
> > > > + pr_status = readq(fme_pr + FME_PR_STS);
> > > > + if (!(pr_status & FME_PR_STS_PR_STS))
> > > > + return 0;
> > > > +
> > > > + pr_error = readq(fme_pr + FME_PR_ERR);
> > > > + writeq(pr_error, fme_pr + FME_PR_ERR);
> > > > +
> > > > + return pr_error;
> > > > +}
> > > > +
> > > > +static int fme_mgr_write_init(struct fpga_manager *mgr,
> > > > + struct fpga_image_info *info,
> > > > + const char *buf, size_t count)
> > > > +{
> > > > + struct device *dev = &mgr->dev;
> > > > + struct fme_mgr_priv *priv = mgr->priv;
> > > > + void __iomem *fme_pr = priv->ioaddr;
> > > > + u64 pr_ctrl, pr_status;
> > > > +
> > > > + if (!(info->flags & FPGA_MGR_PARTIAL_RECONFIG)) {
> > > > + dev_err(dev, "only support partial reconfiguration.\n");
> > >
> > > supports
> > >
> > > > + return -EINVAL;
> > > > + }
> > > > +
> > > > + dev_dbg(dev, "resetting PR before initiated PR\n");
> > > > +
> > > > + pr_ctrl = readq(fme_pr + FME_PR_CTRL);
> > > > + pr_ctrl |= FME_PR_CTRL_PR_RST;
> > > > + writeq(pr_ctrl, fme_pr + FME_PR_CTRL);
> > > > +
> > > > + if (readq_poll_timeout(fme_pr + FME_PR_CTRL, pr_ctrl,
> > > > + pr_ctrl & FME_PR_CTRL_PR_RSTACK, 1,
> > > > + PR_WAIT_TIMEOUT)) {
> > > > + dev_err(dev, "maximum PR timeout\n");
> > >
> > > We have two dev_err's with the same "maximum PR timeout" so the user
> > > would not be able to see at which point the timeout occurred.
> > >
> > > I suggest to get rid of the word 'maximum' for both. This one could
> > > be 'reset ack timeout" or something similar.
> >
> > Sure, will switch to a more specific message per your suggestion. Thanks.
> >
> > >
> > > > + return -ETIMEDOUT;
> > > > + }
> > > > +
> > > > + pr_ctrl = readq(fme_pr + FME_PR_CTRL);
> > > > + pr_ctrl &= ~FME_PR_CTRL_PR_RST;
> > > > + writeq(pr_ctrl, fme_pr + FME_PR_CTRL);
> > > > +
> > > > + dev_dbg(dev,
> > > > + "waiting for PR resource in HW to be initialized and ready\n");
> > > > +
> > > > + if (readq_poll_timeout(fme_pr + FME_PR_STS, pr_status,
> > > > + (pr_status & FME_PR_STS_PR_STS) ==
> > > > + FME_PR_STS_PR_STS_IDLE, 1, PR_WAIT_TIMEOUT)) {
> > > > + dev_err(dev, "maximum PR timeout\n");
> > >
> > > "PR_STS timeout"? Or something better.
> > >
> > > > + priv->pr_error = fme_mgr_pr_error_handle(fme_pr);
> > > > + return -ETIMEDOUT;
> > > > + }
> > > > +
> > > > + dev_dbg(dev, "check and clear previous PR error\n");
> > > > + priv->pr_error = fme_mgr_pr_error_handle(fme_pr);
> > > > + if (priv->pr_error)
> > > > + dev_dbg(dev, "previous PR error detected %llx\n",
> > > > + (unsigned long long)priv->pr_error);
> > > > +
> > > > + dev_dbg(dev, "set PR port ID\n");
> > > > +
> > > > + pr_ctrl = readq(fme_pr + FME_PR_CTRL);
> > > > + pr_ctrl &= ~FME_PR_CTRL_PR_RGN_ID;
> > > > + pr_ctrl |= FIELD_PREP(FME_PR_CTRL_PR_RGN_ID, info->region_id);
> > > > + writeq(pr_ctrl, fme_pr + FME_PR_CTRL);
> > > > +
> > > > + return 0;
> > > > +}
> > > > +
> > > > +static int fme_mgr_write(struct fpga_manager *mgr,
> > > > + const char *buf, size_t count)
> > > > +{
> > > > + struct device *dev = &mgr->dev;
> > > > + struct fme_mgr_priv *priv = mgr->priv;
> > > > + void __iomem *fme_pr = priv->ioaddr;
> > > > + u64 pr_ctrl, pr_status, pr_data;
> > > > + int delay = 0, pr_credit, i = 0;
> > > > +
> > > > + dev_dbg(dev, "start request\n");
> > > > +
> > > > + pr_ctrl = readq(fme_pr + FME_PR_CTRL);
> > > > + pr_ctrl |= FME_PR_CTRL_PR_START;
> > > > + writeq(pr_ctrl, fme_pr + FME_PR_CTRL);
> > > > +
> > > > + dev_dbg(dev, "pushing data from bitstream to HW\n");
> > > > +
> > > > + pr_status = readq(fme_pr + FME_PR_STS);
> > > > + pr_credit = FIELD_GET(FME_PR_STS_PR_CREDIT, pr_status);
> > > > +
> > > > + while (count > 0) {
> > > > + while (pr_credit <= 1) {
> > > > + if (delay++ > PR_WAIT_TIMEOUT) {
> > > > + dev_err(dev, "maximum try\n");
> > >
> > > It looks like this is waiting for an entry in a queue and timing out
> > > here. Could you add a some comments for pr_credit above and this
> > > loop? Also a better error message, perhaps "PR credit timeout"?
> >
> > Driver needs to read the PR credit to know if it could push PR data
> > to hardware or not. I will add more description here on this PR credit,
> > and use "PR credit timeout" as error message.
> >
> > >
> > > > + return -ETIMEDOUT;
> > > > + }
> > > > + udelay(1);
> > > > +
> > > > + pr_status = readq(fme_pr + FME_PR_STS);
> > > > + pr_credit = FIELD_GET(FME_PR_STS_PR_CREDIT, pr_status);
> > > > + }
> > > > +
> > > > + if (count >= 4) {
> > > > + pr_data = 0;
> > > > + pr_data |= FIELD_PREP(FME_PR_DATA_PR_DATA_RAW,
> > > > + *(((u32 *)buf) + i));
> > > > + writeq(pr_data, fme_pr + FME_PR_DATA);
> > > > + count -= 4;
> > > > + pr_credit--;
> > > > + i++;
> > > > + } else {
> > > > + WARN_ON(1);
> > > > + return -EINVAL;
> > > > + }
> > > > + }
> > > > +
> > > > + return 0;
> > > > +}
> > > > +
> > > > +static int fme_mgr_write_complete(struct fpga_manager *mgr,
> > > > + struct fpga_image_info *info)
> > > > +{
> > > > + struct device *dev = &mgr->dev;
> > > > + struct fme_mgr_priv *priv = mgr->priv;
> > > > + void __iomem *fme_pr = priv->ioaddr;
> > > > + u64 pr_ctrl;
> > > > +
> > > > + pr_ctrl = readq(fme_pr + FME_PR_CTRL);
> > > > + pr_ctrl |= FME_PR_CTRL_PR_COMPLETE;
> > > > + writeq(pr_ctrl, fme_pr + FME_PR_CTRL);
> > > > +
> > > > + dev_dbg(dev, "green bitstream push complete\n");
> > > > + dev_dbg(dev, "waiting for HW to release PR resource\n");
> > > > +
> > > > + if (readq_poll_timeout(fme_pr + FME_PR_CTRL, pr_ctrl,
> > > > + !(pr_ctrl & FME_PR_CTRL_PR_START), 1,
> > > > + PR_WAIT_TIMEOUT)) {
> > > > + dev_err(dev, "maximum try.\n");
> > >
> > > Some message specific to here also, please.
> > >
> > > > + return -ETIMEDOUT;
> > > > + }
> > > > +
> > > > + dev_dbg(dev, "PR operation complete, checking status\n");
> > > > + priv->pr_error = fme_mgr_pr_error_handle(fme_pr);
> > > > + if (priv->pr_error) {
> > > > + dev_dbg(dev, "PR error detected %llx\n",
> > > > + (unsigned long long)priv->pr_error);
> > > > + return -EIO;
> > > > + }
> > > > +
> > > > + dev_dbg(dev, "PR done successfully\n");
> > > > +
> > > > + return 0;
> > > > +}
> > > > +
> > > > +static enum fpga_mgr_states fme_mgr_state(struct fpga_manager *mgr)
> > > > +{
> > > > + return FPGA_MGR_STATE_UNKNOWN;
> > > > +}
> > > > +
> > > > +static u64 fme_mgr_status(struct fpga_manager *mgr)
> > > > +{
> > > > + struct fme_mgr_priv *priv = mgr->priv;
> > > > +
> > > > + return pr_error_to_mgr_status(priv->pr_error);
> > > > +}
> > > > +
> > > > +static const struct fpga_manager_ops fme_mgr_ops = {
> > > > + .write_init = fme_mgr_write_init,
> > > > + .write = fme_mgr_write,
> > > > + .write_complete = fme_mgr_write_complete,
> > > > + .state = fme_mgr_state,
> > > > + .status = fme_mgr_status,
> > > > +};
> > > > +
> > > > +static int fme_mgr_probe(struct platform_device *pdev)
> > > > +{
> > > > + struct device *dev = &pdev->dev;
> > > > + struct fme_mgr_priv *priv;
> > > > + struct fpga_manager *mgr;
> > > > + struct resource *res;
> > > > + int ret;
> > > > +
> > > > + priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
> > > > + if (!priv)
> > > > + return -ENOMEM;
> > > > +
> > > > + res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
> > > > + priv->ioaddr = devm_ioremap(dev, res->start, resource_size(res));
> > > > + if (IS_ERR(priv->ioaddr))
> > > > + return PTR_ERR(priv->ioaddr);
> > > > +
> > > > + ret = sysfs_create_files(&pdev->dev.kobj, fme_mgr_attrs);
> > > > + if (ret)
> > > > + return ret;
> > > > +
> > > > + mgr = devm_kzalloc(dev, sizeof(*mgr), GFP_KERNEL);
> > > > + if (!mgr)
> > > > + goto sysfs_remove_exit;
> > > > +
> > > > + mgr->name = "DFL FPGA Manager";
> > > > + mgr->mops = &fme_mgr_ops;
> > > > + mgr->priv = priv;
> > > > + mgr->parent = dev;
> > > > + platform_set_drvdata(pdev, mgr);
> > > > +
> > > > + ret = fpga_mgr_register(mgr);
> > > > + if (ret) {
> > > > + dev_err(dev, "unable to register FPGA manager\n");
> > > > + goto sysfs_remove_exit;
> > > > + }
> > > > +
> > > > + return 0;
> > > > +
> > > > +sysfs_remove_exit:
> > > > + sysfs_remove_files(&pdev->dev.kobj, fme_mgr_attrs);
> > > > + return ret;
> > > > +}
> > > > +
> > > > +static int fme_mgr_remove(struct platform_device *pdev)
> > > > +{
> > > > + struct fpga_manager *mgr = platform_get_drvdata(pdev);
> > > > +
> > > > + fpga_mgr_unregister(mgr);
> > > > + sysfs_remove_files(&pdev->dev.kobj, fme_mgr_attrs);
> > > > +
> > > > + return 0;
> > > > +}
> > > > +
> > > > +static struct platform_driver fme_mgr_driver = {
> > > > + .driver = {
> > > > + .name = FPGA_DFL_FME_MGR,
> > > > + },
> > > > + .probe = fme_mgr_probe,
> > > > + .remove = fme_mgr_remove,
> > > > +};
> > > > +
> > > > +module_platform_driver(fme_mgr_driver);
> > > > +
> > > > +MODULE_DESCRIPTION("FPGA Manager for FPGA Management Engine");
> > > > +MODULE_AUTHOR("Intel Corporation");
> > > > +MODULE_LICENSE("GPL v2");
> > > > +MODULE_ALIAS("platform:fpga-dfl-fme-mgr");
> > > > diff --git a/drivers/fpga/fpga-dfl.h b/drivers/fpga/fpga-dfl.h
> > > > index e5a1094..d45eb82 100644
> > > > --- a/drivers/fpga/fpga-dfl.h
> > > > +++ b/drivers/fpga/fpga-dfl.h
> > > > @@ -130,7 +130,44 @@
> > > >
> > > > /* FME Partial Reconfiguration Sub Feature Register Set */
> > > > #define FME_PR_DFH DFH
> > > > -#define FME_PR_SIZE DFH_SIZE
> > > > +#define FME_PR_CTRL 0x8
> > > > +#define FME_PR_STS 0x10
> > > > +#define FME_PR_DATA 0x18
> > > > +#define FME_PR_ERR 0x20
> > > > +#define FME_PR_INTFC_ID_H 0xA8
> > > > +#define FME_PR_INTFC_ID_L 0xB0
> > > > +#define FME_PR_SIZE 0xB8
> > > > +
> > > > +/* FME PR Control Register Bitfield */
> > > > +#define FME_PR_CTRL_PR_RST BIT(0) /* Reset PR engine */
> > > > +#define FME_PR_CTRL_PR_RSTACK BIT(4) /* Ack for PR engine reset */
> > > > +#define FME_PR_CTRL_PR_RGN_ID GENMASK_ULL(9, 7) /* PR Region ID */
> > > > +#define FME_PR_CTRL_PR_START BIT(12) /* Start to request for PR service */
> > > > +#define FME_PR_CTRL_PR_COMPLETE BIT(13) /* PR data push complete notification */
> > > > +
> > > > +/* FME PR Status Register Bitfield */
> > > > +/* Number of available entries in HW queue inside the PR engine. */
> > > > +#define FME_PR_STS_PR_CREDIT GENMASK_ULL(8, 0)
> > > > +#define FME_PR_STS_PR_STS BIT(16) /* PR operation status */
> > > > +#define FME_PR_STS_PR_STS_IDLE 0
> > > > +#define FME_PR_STS_PR_CTRLR_STS GENMASK_ULL(22, 20) /* Controller status */
> > > > +#define FME_PR_STS_PR_HOST_STS GENMASK_ULL(27, 24) /* PR host status */
> > > > +
> > > > +/* FME PR Data Register Bitfield */
> > > > +/* PR data from the raw-binary file. */
> > > > +#define FME_PR_DATA_PR_DATA_RAW GENMASK_ULL(32, 0)
> > > > +
> > > > +/* FME PR Error Register */
> > > > +/* Previous PR Operation errors detected. */
> > > > +#define FME_PR_ERR_OPERATION_ERR BIT(0)
> > > > +/* CRC error detected. */
> > > > +#define FME_PR_ERR_CRC_ERR BIT(1)
> > > > +/* Incompatible PR bitstream detected. */
> > > > +#define FME_PR_ERR_INCOMPATIBLE_BS BIT(2)
> > > > +/* PR data push protocol violated. */
> > > > +#define FME_PR_ERR_PROTOCOL_ERR BIT(3)
> > > > +/* PR data fifo overflow error detected */
> > > > +#define FME_PR_ERR_FIFO_OVERFLOW BIT(4)
> > > >
> > > > /* FME HSSI Sub Feature Register Set */
> > > > #define FME_HSSI_DFH DFH
> > >
> > > I see fpga-dfl.h as enumeration code which is separate from any driver
> > > implementation specifics other than what's required for the DFL
> > > enumeration scheme. These PR engine #defines should move to a .h
> > > that is dedicated to this specific PR hardware device. If someone else
> > > adds a different PR device to the framework, their PR driver would
> > > also have its own .h. Same for any other modules that aren't central
> > > to DFL enumeration.
> >
> > Sure, will move PR related register to a separated header file.
> > DFL enumeration related registers, will still be kept in fpga-dfl.h.
> >
> > Thanks
> > Hao
> >
> > >
> > > Thanks,
> > > Alan
> > >
> > > > --
> > > > 1.8.3.1
> > > >
Powered by blists - more mailing lists