linux-kernel - Re: [PATCH v3 3/6] phy: rockchip-typec: enable usb3 host during usb3 phy power on

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <3430653.U8tW0J7X0D@phil>
Date:   Sat, 17 Feb 2018 01:08:07 +0100
From:   Heiko Stuebner <heiko@...ech.de>
To:     Enric Balletbo i Serra <enric.balletbo@...labora.com>
Cc:     Rob Herring <robh+dt@...nel.org>,
        Kishon Vijay Abraham I <kishon@...com>,
        Brian Norris <briannorris@...omium.org>, dianders@...omium.org,
        Chris Zhong <zyw@...k-chips.com>,
        William wu <wulf@...k-chips.com>, hl@...k-chips.com,
        devicetree@...r.kernel.org, linux-arm-kernel@...ts.infradead.org,
        linux-rockchip@...ts.infradead.org, linux-kernel@...r.kernel.org,
        kernel@...labora.com
Subject: Re: [PATCH v3 3/6] phy: rockchip-typec: enable usb3 host during usb3 phy power on

Am Freitag, 16. Februar 2018, 13:09:53 CET schrieb Enric Balletbo i Serra:
> From: William wu <wulf@...k-chips.com>
> 
> We have forced usb3 to work in usb2 only mode in firmware by setting
> usb3tousb2_en (bit3 of GRF_USB3PHY0/1_CON0) to 1, and setting
> host_u3_port_disable (bit0 of GRF_USB3OTG0/1_CON1) to 1 and host_u3_port
> (bit15~12 of GRF_USB3OTG0/1_CON1) to 0. So we need to re-enable usb3
> host.
> 
> Note that the RK3399 TRM suggests that we should keep the whole usb3
> controller in reset for the duration of the Type-C PHY initialization.
> However, it's hard to assert the reset in the current framework of
> reset. And according to the TRM, it doesn't require that we should
> clear the usb3tousb2 bit before pipe ready. So let's enable the usb3
> host after pipe ready to avoid the Type-C PHY initialization failure.
> 
> Signed-off-by: William wu <wulf@...k-chips.com>
> Signed-off-by: Enric Balletbo i Serra <enric.balletbo@...labora.com>

Reviewed-by: Heiko Stuebner <heiko@...ech.de>