linux-kernel - Re: [PATCH v2 0/7] R-Car M3-N DTS fixes

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [day] [month] [year] [list]

Message-ID: <20180223145155.skbg6g3c5ic6yfg6@verge.net.au>
Date:   Fri, 23 Feb 2018 15:51:56 +0100
From:   Simon Horman <horms@...ge.net.au>
To:     Jacopo Mondi <jacopo+renesas@...ndi.org>
Cc:     arnd@...db.de, geert@...ux-m68k.org, magnus.damm@...il.com,
        robh+dt@...nel.org, mark.rutland@....com,
        devicetree@...r.kernel.org, linux-arm-kernel@...ts.infradead.org,
        linux-renesas-soc@...r.kernel.org, linux-kernel@...r.kernel.org
Subject: Re: [PATCH v2 0/7] R-Car M3-N DTS fixes

On Fri, Feb 23, 2018 at 02:40:52PM +0100, Jacopo Mondi wrote:
> Hello,
>    in this second iteration I have fixed two remarks from Geert received on
> v1:
> - Extend "du" address length to include third channel
> - Move usb2_phy1 device node next to usb2_phy0
> 
> Two minor nits were not addressed:
> - "placeholder" comment position not changed to maintain consistency with
>   placeholders in M3-W. When they'll get changed, let's change all of them at
>   the same time.
> - The addresses block sizes (and multiple address range blocks) are still there
>   (next time we can consider dropping the unit address from place-holder nodes
>   and do not add any "reg" property at all, until DTC won't start complaining
>   about this as well)
> 
> All patches but the newly introduced 7/7 now have Geert's Reviewed-by tag.
> 
> Simon: as per v1, this series is based on my M3-N enablement series, last
> patch on Ether-AVB excluded.
> 
> Thanks
>    j
> 
> v1 -> v2:
> - Extend "du" address length to include third channel
> - Move usb2_phy1 node next to usb2_phy0
> 
> Jacopo Mondi (7):
>   arm64: dts: renesas: r8a77965: Add "reg" properties
>   arm64: dts: renesas: r8a77965: Add #address-cells and #size-cells
>   arm64: dts: renesas: r8a77965: Remove stale reg property
>   arm64: dts: renesas: r8a77965: Add #phy-cells property
>   arm64: dts: renesas: r8a77965: Add #pwm-cells property
>   arm64: dts: renesas: r8a77965: Add #interrupt-cells property
>   arm64: dts: renesas: r8a77965: Move usb2_phy1 up
> 
>  arch/arm64/boot/dts/renesas/r8a77965.dtsi | 89 +++++++++++++++++++++++++++++--

Thanks, applied.