[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <0337DBEF-58BD-447A-A828-DE1A7CEF21E4@amd.com>
Date: Mon, 26 Feb 2018 16:37:18 +0000
From: "Morton, Eric" <Eric.Morton@....com>
To: Borislav Petkov <bp@...en8.de>,
"Lendacky, Thomas" <Thomas.Lendacky@....com>
CC: Thomas Gleixner <tglx@...utronix.de>,
Paul Menzel <pmenzel@...gen.mpg.de>,
Paul Menzel <pmenzel+linux-irq@...gen.mpg.de>,
LKML <linux-kernel@...r.kernel.org>,
"Ghannam, Yazen" <Yazen.Ghannam@....com>
Subject: Re: `do_IRQ: 1.55 No irq handler for vector` on ASRock E350M1
Thomas,
Yazen dug out PLAT-21393 as sounding like this issue. I haven't had a chance to digest it.
Eric
On 2/26/18, 10:31 AM, "Borislav Petkov" <bp@...en8.de> wrote:
On Mon, Feb 26, 2018 at 10:14:10AM -0600, Tom Lendacky wrote:
> On 2/24/2018 2:59 AM, Thomas Gleixner wrote:
> > On Sat, 24 Feb 2018, Paul Menzel wrote:
> >> Am 23.02.2018 um 20:09 schrieb Borislav Petkov:
> >>> On Fri, Feb 23, 2018 at 07:18:34PM +0100, Thomas Gleixner wrote:
> >>>> Borislav is seeing similar issues on larger AMD machines. The interrupt
> >>>> seems to come from BIOS/microcode during bringup of secondary CPUs and we
> >>>> have no idea why.
> >>>
> >>> Paul, can you boot 4.14 and grep your dmesg for something like:
> >>>
> >>> [ 0.000000] spurious 8259A interrupt: IRQ7. >
> >>> ?
> >>
> >> No, I do not see that. Please find the logs attached.
> >
> > From your 4.14 log:
> >
> > Feb 19 09:48:06.843173 kodi kernel: CPU 0 irqstacks, hard=e9b0a000 soft=e9b0c000
> > Feb 19 09:48:06.843216 kodi kernel: spurious 8259A interrupt: IRQ7.
>
> I think I remember seeing something like this previously and it turned out
> to be a BIOS bug. All the AP's were enabled to work with the legacy 8259
> interrupt controller. In an SMP system, only one processor in the system
> should be configured to handle legacy 8259 interrupts (ExtINT delivery
> mode - see Intel's SDM, Volume 3, section 10.5.1, Delivery Mode). Once
> the BIOS was fixed, the spurious interrupt message went away.
>
> I believe at some point during UEFI, the APs were exposed to an ExtINT
> interrupt. Since they were configured to handle ExtINT delivery mode and
> interrupts were not yet enabled, the interrupt was left pending. When the
> APs were started by the OS and interrupts were enabled, the interrupt
> triggered. Since the original pending interrupt was handled by the BSP,
> there was no longer an interrupt actually pending, so the 8259 responds
> with IRQ 7 when queried by the OS. This occurred for each AP.
Interesting - is this something that can happen on Zen too?
Because I have such reports too.
--
Regards/Gruss,
Boris.
Good mailing practices for 400: avoid top-posting and trim the reply.
Powered by blists - more mailing lists