[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <1519726020-24442-1-git-send-email-sebastian@resin.io>
Date: Tue, 27 Feb 2018 12:07:00 +0200
From: Sebastian Panceac <sebastian@...in.io>
To: andy.shevchenko@...il.com
Cc: Sebastian Panceac <sebastian@...in.io>, x86@...nel.org,
linux-kernel@...r.kernel.org
Subject: [PATCH 1/1] x86: Fix Intel Edison module stuck reboot
Hi Andy,
I fixed the commit description according to your suggestions and used git send-email.
Regards!
When powering Intel Edison module with 3.3V,
the "reboot" command makes the module stuck.
If the module is powered at a greater voltage,
like 4.4V(as the Edison Mini Breakout board does), reboot works OK.
This patch copies the behaviour from the official Intel Edison BSP,
where "IPCMSG_COLD_RESET" message
was sent to SCU by default at reboot time.
In the official BSP, sending the "IPCMSG_COLD_BOOT" message instead
of "IPCMSG_COLD_RESET" was possible,
by using a kernel command line parameter.
Signed-off-by: Sebastian Panceac <sebastian@...in.io>
---
arch/x86/platform/intel-mid/intel-mid.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/x86/platform/intel-mid/intel-mid.c b/arch/x86/platform/intel-mid/intel-mid.c
index 2c67bae..fb1df94 100644
--- a/arch/x86/platform/intel-mid/intel-mid.c
+++ b/arch/x86/platform/intel-mid/intel-mid.c
@@ -79,7 +79,7 @@ static void intel_mid_power_off(void)
static void intel_mid_reboot(void)
{
- intel_scu_ipc_simple_command(IPCMSG_COLD_BOOT, 0);
+ intel_scu_ipc_simple_command(IPCMSG_COLD_RESET, 0);
}
static unsigned long __init intel_mid_calibrate_tsc(void)
--
2.7.4
Powered by blists - more mailing lists