[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <1519810849-15131-1-git-send-email-sebastian@resin.io>
Date: Wed, 28 Feb 2018 11:40:49 +0200
From: Sebastian Panceac <sebastian@...in.io>
To: tglx@...utronix.de, mingo@...hat.com, hpa@...or.com,
linux-kernel@...r.kernel.org, andy.shevchenko@...il.com,
x86@...nel.org
Cc: Sebastian Panceac <sebastian@...in.io>
Subject: [PATCH v3 1/1] x86: Fix Intel Edison module stuck reboot
When powering Intel Edison module with 3.3V, the "reboot" command makes
the module stuck.
If the module is powered at a greater voltage, like 4.4V (as the Edison
Mini Breakout board does), reboot works OK.
This patch copies the behaviour from the official Intel Edison BSP,
where "IPCMSG_COLD_RESET" message was sent to SCU by default at
reboot time.
In the official BSP, sending the "IPCMSG_COLD_BOOT" message instead of
"IPCMSG_COLD_RESET" was possible, by using a kernel command
line parameter.
Signed-off-by: Sebastian Panceac <sebastian@...in.io>
---
Hi,
I submitted again the patch, after taking into consideration Andy's suggestions.
Regards!
arch/x86/platform/intel-mid/intel-mid.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/x86/platform/intel-mid/intel-mid.c b/arch/x86/platform/intel-mid/intel-mid.c
index 2c67bae..fb1df94 100644
--- a/arch/x86/platform/intel-mid/intel-mid.c
+++ b/arch/x86/platform/intel-mid/intel-mid.c
@@ -79,7 +79,7 @@ static void intel_mid_power_off(void)
static void intel_mid_reboot(void)
{
- intel_scu_ipc_simple_command(IPCMSG_COLD_BOOT, 0);
+ intel_scu_ipc_simple_command(IPCMSG_COLD_RESET, 0);
}
static unsigned long __init intel_mid_calibrate_tsc(void)
--
2.7.4
Powered by blists - more mailing lists