| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <1643b74a-62ba-bea6-71c2-a2dd02430463@ti.com>
Date: Fri, 9 Mar 2018 16:13:36 -0600
From: Suman Anna <s-anna@...com>
To: Robin Murphy <robin.murphy@....com>, Pavel Machek <pavel@....cz>
CC: <ivo.g.dimitrov.75@...il.com>, <khilman@...nel.org>,
Tony Lindgren <tony@...mide.com>, <aaro.koskinen@....fi>,
kernel list <linux-kernel@...r.kernel.org>, <sre@...nel.org>,
<martijn@...xit.nl>,
Filip Matijević <filip.matijevic.pz@...il.com>,
<abcloriens@...il.com>, <sakari.ailus@...ux.intel.com>,
<pali.rohar@...il.com>, <clayton@...ftyguy.net>,
<linux-omap@...r.kernel.org>, <patrikbachan@...il.com>,
linux-arm-kernel <linux-arm-kernel@...ts.infradead.org>,
<serge@...lyn.com>
Subject: Re: Nokia N900: refcount_t underflow, use after free
On 03/09/2018 06:08 AM, Robin Murphy wrote:
> On 08/03/18 18:50, Pavel Machek wrote:
>> Hi!
>>
>>>> * Pavel Machek <pavel@....cz> [180308 14:31]:
>>>>> Hi!
>>>>>
>>>>> I'm getting this warning... Has anyone seen/debugged that before?
>>>>> Unfortunately the backtrace does not seem to be too useful :-(.
>>>>
>>>> Adding Suman to Cc, as it points to arm_iommu_release_mapping().
>>>
>>> Hmm, we need to find out if the failure paths in isp_probe() are
>>> mismatched, or if this is coming from some mismatch between the OMAP
>>> IOMMU driver and the DMA plumbing. AFAIK, the cleanup paths in this
>>
>> Well, camera only started to work on N900 pretty recently. Let me add
>> some debug printks...
>>
>> Camera does not work in 4.16.0-rc4-next-20180308-dirty.
>>
>> I see this. It looks like problem in isp error paths, indeed:
>
> Well, there certainly seems to be an obvious bug wherein
> isp_detach_iommu() just releases the mapping directly without calling
> arm_iommu_detach_device() to balance the equivalent attach. That can't
> be helping.
Indeed, I have been able to reproduce the same warning using a
standalone test module, and the missing arm_iommu_detach_device() is
causing the warning after probe (during failure path) or during remove.
regards
Suman
>
> Robin.
>
>>
>> [ 1.672210] bus: 'platform': driver_probe_device: matched device
>> 480bc000.isp with dr
>> iver omap3isp
>> [ 1.681976] isp_probe: 1
>> [ 1.684906] isp_probe: 2
>> [ 1.687591] isp_probe: 3
>> [ 1.690338] isp_probe: 4
>> [ 1.693054] omap3isp 480bc000.isp: 480bc000.isp supply vdd-csiphy1
>> not found, using d
>> ummy regulator
>> [ 1.702728] omap3isp 480bc000.isp: 480bc000.isp supply vdd-csiphy2
>> not found, using d
>> ummy regulator
>> [ 1.712402] isp_probe: 5
>> [ 1.715393] omap3isp 480bc000.isp: Revision 2.0 found
>> [ 1.720794] isp_probe: 6
>> [ 1.723815] isp_probe: 7
>> [ 1.726715] omap-iommu 480bd400.mmu: 480bd400.mmu: version 1.1
>> [ 1.732849] isp_probe: 8
>> [ 1.735656] isp_probe: 9
>> [ 1.738403] isp_probe: 10
>> [ 1.741241] isp_probe: f3
>> [ 1.744018] iommu_release_mapping... ce4d9500 ce4d949c
>> [ 1.749450] iommu_release_mapping... ok
>> [ 1.753479] isp_probe: f4
>> [ 1.756286] clk_unregister: unregistering prepared clock: cam_xclka
>> [ 1.762878] clk_unregister: unregistering prepared clock: cam_xclkb
>> [ 1.769500] isp_probe: f5
>> [ 1.772430] iommu_release_mapping... ce4d9500 ce4d949c
>> [ 1.777862] ------------[ cut here ]------------
>> [ 1.782745] WARNING: CPU: 0 PID: 1 at lib/refcount.c:187
>> refcount_sub_and_test+0x94/0
>> xa8
>> [ 1.791290] refcount_t: underflow; use-after-free.
>> [ 1.796356] Modules linked in:
>> [ 1.799591] CPU: 0 PID: 1 Comm: swapper Not tainted
>> 4.16.0-rc4-next-20180308-dirty #7
>> 3
>> [ 1.807922] Hardware name: Nokia RX-51 board
>> [ 1.812469] [<c010d6cc>] (unwind_backtrace) from [<c010b568>]
>> (show_stack+0x10/0x14)
>> [ 1.820648] [<c010b568>] (show_stack) from [<c0127df4>]
>> (__warn+0xe8/0x110)
>> ...
>> [ 1.968688] iommu_release_mapping... ok
>> [ 1.973754] bus: 'platform': driver_probe_device: matched device
>> n900-battery with driver rx51-battery
>> [ 1.984436] bus: 'platform': driver_probe_device: matched device
>> 48002524.bandgap with driver ti-soc-thermal
>>
>> diff --git a/arch/arm/mm/dma-mapping.c b/arch/arm/mm/dma-mapping.c
>> index 8c398fe..16f4c69 100644
>> --- a/arch/arm/mm/dma-mapping.c
>> +++ b/arch/arm/mm/dma-mapping.c
>> @@ -2251,8 +2251,11 @@ static int extend_iommu_mapping(struct
>> dma_iommu_mapping *mapping)
>> void arm_iommu_release_mapping(struct dma_iommu_mapping *mapping)
>> {
>> + printk("iommu_release_mapping... %lx %lx\n", mapping,
>> mapping->domain);
>> if (mapping)
>> kref_put(&mapping->kref, release_iommu_mapping);
>> + printk("iommu_release_mapping... ok\n");
>> +
>> }
>> EXPORT_SYMBOL_GPL(arm_iommu_release_mapping);
>> diff --git a/drivers/media/platform/omap3isp/isp.c
>> b/drivers/media/platform/omap3isp/isp.c
>> index 8eb000e..4d58683 100644
>> --- a/drivers/media/platform/omap3isp/isp.c
>> +++ b/drivers/media/platform/omap3isp/isp.c
>> @@ -2193,12 +2193,14 @@ static int isp_probe(struct platform_device
>> *pdev)
>> int ret;
>> int i, m;
>> + printk("isp_probe: 1\n");
>> isp = devm_kzalloc(&pdev->dev, sizeof(*isp), GFP_KERNEL);
>> if (!isp) {
>> dev_err(&pdev->dev, "could not allocate memory\n");
>> return -ENOMEM;
>> }
>> + printk("isp_probe: 2\n");
>> ret = fwnode_property_read_u32(of_fwnode_handle(pdev->dev.of_node),
>> "ti,phy-type", &isp->phy_type);
>> if (ret)
>> @@ -2219,6 +2221,8 @@ static int isp_probe(struct platform_device *pdev)
>> mutex_init(&isp->isp_mutex);
>> spin_lock_init(&isp->stat_lock);
>> + printk("isp_probe: 3\n");
>> +
>> ret = v4l2_async_notifier_parse_fwnode_endpoints(
>> &pdev->dev, &isp->notifier, sizeof(struct isp_async_subdev),
>> isp_fwnode_parse);
>> @@ -2232,6 +2236,7 @@ static int isp_probe(struct platform_device *pdev)
>> if (ret)
>> goto error;
>> + printk("isp_probe: 4\n");
>> platform_set_drvdata(pdev, isp);
>> /* Regulators */
>> @@ -2258,6 +2263,7 @@ static int isp_probe(struct platform_device *pdev)
>> return PTR_ERR(isp->mmio_base[map_idx]);
>> }
>> + printk("isp_probe: 5\n");
>> ret = isp_get_clocks(isp);
>> if (ret < 0)
>> goto error;
>> @@ -2277,6 +2283,7 @@ static int isp_probe(struct platform_device *pdev)
>> goto error;
>> }
>> + printk("isp_probe: 6\n");
>> ret = isp_reset(isp);
>> if (ret < 0)
>> goto error_isp;
>> @@ -2306,6 +2313,7 @@ static int isp_probe(struct platform_device *pdev)
>> isp->mmio_base[OMAP3_ISP_IOMEM_CSI2A_REGS1]
>> + isp_res_maps[m].offset[i];
>> + printk("isp_probe: 7\n");
>> isp->mmio_hist_base_phys =
>> mem->start + isp_res_maps[m].offset[OMAP3_ISP_IOMEM_HIST];
>> @@ -2316,6 +2324,8 @@ static int isp_probe(struct platform_device
>> *pdev)
>> goto error_isp;
>> }
>> + printk("isp_probe: 8\n");
>> +
>> /* Interrupt */
>> ret = platform_get_irq(pdev, 0);
>> if (ret <= 0) {
>> @@ -2325,6 +2335,7 @@ static int isp_probe(struct platform_device *pdev)
>> }
>> isp->irq_num = ret;
>> + printk("isp_probe: 9\n");
>> if (devm_request_irq(isp->dev, isp->irq_num, isp_isr, IRQF_SHARED,
>> "OMAP3 ISP", isp)) {
>> dev_err(isp->dev, "Unable to request IRQ\n");
>> @@ -2332,6 +2343,7 @@ static int isp_probe(struct platform_device *pdev)
>> goto error_iommu;
>> }
>> + printk("isp_probe: 10\n");
>> /* Entities */
>> ret = isp_initialize_modules(isp);
>> if (ret < 0)
>> @@ -2345,27 +2357,35 @@ static int isp_probe(struct platform_device
>> *pdev)
>> if (ret < 0)
>> goto error_register_entities;
>> + printk("isp_probe: 11\n");
>> isp->notifier.ops = &isp_subdev_notifier_ops;
>> ret = v4l2_async_notifier_register(&isp->v4l2_dev,
>> &isp->notifier);
>> if (ret)
>> goto error_register_entities;
>> + printk("isp_probe: 12\n");
>> isp_core_init(isp, 1);
>> + printk("isp_probe: 13\n");
>> omap3isp_put(isp);
>> return 0;
>> error_register_entities:
>> + printk("isp_probe: f1\n");
>> isp_unregister_entities(isp);
>> error_modules:
>> + printk("isp_probe: f2\n");
>> isp_cleanup_modules(isp);
>> error_iommu:
>> + printk("isp_probe: f3\n");
>> isp_detach_iommu(isp);
>> error_isp:
>> + printk("isp_probe: f4\n");
>> isp_xclk_cleanup(isp);
>> __omap3isp_put(isp, false);
>> error:
>> + printk("isp_probe: f5\n");
>> v4l2_async_notifier_cleanup(&isp->notifier);
>> mutex_destroy(&isp->isp_mutex);
>>
>>
>>
>>
>> _______________________________________________
>> linux-arm-kernel mailing list
>> linux-arm-kernel@...ts.infradead.org
>> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
>>
Powered by blists - more mailing lists