| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <b5fb541f-cc48-bd4e-372c-789411b214f2@rock-chips.com>
Date: Tue, 13 Mar 2018 11:32:59 +0800
From: Joseph Chen <chenjh@...k-chips.com>
To: Lee Jones <lee.jones@...aro.org>,
Daniel Schultz <d.schultz@...tec.de>
Cc: zyw@...k-chips.com, zhangqing@...k-chips.com,
linux-kernel@...r.kernel.org, w.egorov@...tec.de,
"xsf@...k-chips.com" <xsf@...k-chips.com>,
谢修鑫 <tony.xie@...k-chips.com>
Subject: Re: [PATCH v2 2/2] mfd: rk808: Add restart functionality
Hi, Daniel：
On Rockchip platforms, we always use CRU to restart system.
From your patch, I think you would like to support restart by CRU or
PMIC, right ?
I think restart by PMIC is not accepted, because PMIC restart
means all regualtors are reset (voltage drops to 0mv and then power on
again), including vdd_arm, vdd_logic, vcc_ddr, etc. This is like a cold
boot for machine.
We use CRU reset, because we want to keep status of last log,
GRF, CRU or other registers, but PMIC restart can make them lost.
在 2018/3/12 22:10, Lee Jones 写道:
> Rockchip guys,
>
> I'd really appreciate your input on these two patches please.
>
> Please provide Reviewed-by/Tested-by tags.
>
> On Wed, 07 Mar 2018, Daniel Schultz wrote:
>> When using Rockchip SoCs with rk805/808/818 PMICs, restarts are realized by
>> setting the reset registers in the "Clock and Reset Unit".
>>
>> Since all three shutdown functions have almost the same code, all logic
>> from the shutdown functions can be refactored to a new function
>> "rk808_update_bits", which can update a register by a given address and
>> bitmask.
>>
>> After that, notifier blocks and the restart functions were added to the
>> driver. Like the shutdown function, the restart is bound to the
>> "rockchip,system-power-controller" device tree property and can easily
>> revoked to the software restart by removing the property.
>>
>> Signed-off-by: Daniel Schultz <d.schultz@...tec.de>
>> ---
>> Changes:
>> v2: Re-submit with recipients from Rockchip.
>>
>> drivers/mfd/rk808.c | 97 ++++++++++++++++++++++++++++++-----------------
>> include/linux/mfd/rk808.h | 1 +
>> 2 files changed, 63 insertions(+), 35 deletions(-)
>>
>> diff --git a/drivers/mfd/rk808.c b/drivers/mfd/rk808.c
>> index d138721..2c68f8c 100644
>> --- a/drivers/mfd/rk808.c
>> +++ b/drivers/mfd/rk808.c
>> @@ -27,6 +27,7 @@
>> #include <linux/module.h>
>> #include <linux/of_device.h>
>> #include <linux/regmap.h>
>> +#include <linux/reboot.h>
>>
>> struct rk808_reg_data {
>> int addr;
>> @@ -369,59 +370,73 @@ static const struct regmap_irq_chip rk818_irq_chip = {
>>
>> static struct i2c_client *rk808_i2c_client;
>>
>> -static void rk805_device_shutdown(void)
>> +static void rk808_update_bits(unsigned int reg, unsigned int bit_mask)
>> {
>> int ret;
>> struct rk808 *rk808 = i2c_get_clientdata(rk808_i2c_client);
>>
>> if (!rk808) {
>> dev_warn(&rk808_i2c_client->dev,
>> - "have no rk805, so do nothing here\n");
>> + "have no %s, so do nothing here\n",
>> + rk808->regmap_irq_chip->name);
>> return;
>> }
>>
>> ret = regmap_update_bits(rk808->regmap,
>> - RK805_DEV_CTRL_REG,
>> - DEV_OFF, DEV_OFF);
>> + reg,
>> + bit_mask, bit_mask);
>> if (ret)
>> - dev_err(&rk808_i2c_client->dev, "power off error!\n");
>> + dev_err(&rk808_i2c_client->dev, "can't write to DEVCTRL: %x!\n",
>> + ret);
>> }
>>
>> -static void rk808_device_shutdown(void)
>> +static void rk805_device_shutdown(void)
>> {
>> - int ret;
>> - struct rk808 *rk808 = i2c_get_clientdata(rk808_i2c_client);
>> -
>> - if (!rk808) {
>> - dev_warn(&rk808_i2c_client->dev,
>> - "have no rk808, so do nothing here\n");
>> - return;
>> - }
>> + rk808_update_bits(RK805_DEV_CTRL_REG, DEV_OFF);
>> +}
>> +static int rk805_restart_notify(struct notifier_block *this,
>> + unsigned long mode, void *cmd)
>> +{
>> + rk808_update_bits(RK805_DEV_CTRL_REG, DEV_OFF_RST);
>> + return NOTIFY_DONE;
>> +}
>>
>> - ret = regmap_update_bits(rk808->regmap,
>> - RK808_DEVCTRL_REG,
>> - DEV_OFF_RST, DEV_OFF_RST);
>> - if (ret)
>> - dev_err(&rk808_i2c_client->dev, "power off error!\n");
>> +static void rk808_device_shutdown(void)
>> +{
>> + rk808_update_bits(RK808_DEVCTRL_REG, DEV_OFF_RST);
>> +}
>> +static int rk808_restart_notify(struct notifier_block *this,
>> + unsigned long mode, void *cmd)
>> +{
>> + rk808_update_bits(RK808_DEVCTRL_REG, DEV_OFF);
>> + return NOTIFY_DONE;
>> }
>>
>> static void rk818_device_shutdown(void)
>> {
>> - int ret;
>> - struct rk808 *rk808 = i2c_get_clientdata(rk808_i2c_client);
>> + rk808_update_bits(RK818_DEVCTRL_REG, DEV_OFF_RST);
>> +}
>> +static int rk818_restart_notify(struct notifier_block *this,
>> + unsigned long mode, void *cmd)
>> +{
>> + rk808_update_bits(RK818_DEVCTRL_REG, DEV_OFF);
>> + return NOTIFY_DONE;
>> +}
>>
>> - if (!rk808) {
>> - dev_warn(&rk808_i2c_client->dev,
>> - "have no rk818, so do nothing here\n");
>> - return;
>> - }
>> +static struct notifier_block rk805_restart_handler = {
>> + .notifier_call = rk805_restart_notify,
>> + .priority = 196,
>> +};
>>
>> - ret = regmap_update_bits(rk808->regmap,
>> - RK818_DEVCTRL_REG,
>> - DEV_OFF_RST, DEV_OFF_RST);
>> - if (ret)
>> - dev_err(&rk808_i2c_client->dev, "power off error!\n");
>> -}
>> +static struct notifier_block rk808_restart_handler = {
>> + .notifier_call = rk808_restart_notify,
>> + .priority = 196,
>> +};
>> +
>> +static struct notifier_block rk818_restart_handler = {
>> + .notifier_call = rk818_restart_notify,
>> + .priority = 196,
>> +};
>>
>> static const struct of_device_id rk808_of_match[] = {
>> { .compatible = "rockchip,rk805" },
>> @@ -476,6 +491,7 @@ static int rk808_probe(struct i2c_client *client,
>> cells = rk805s;
>> nr_cells = ARRAY_SIZE(rk805s);
>> pm_pwroff_fn = rk805_device_shutdown;
>> + rk808->nb = &rk805_restart_handler;
>> break;
>> case RK808_ID:
>> rk808->regmap_cfg = &rk808_regmap_config;
>> @@ -485,6 +501,7 @@ static int rk808_probe(struct i2c_client *client,
>> cells = rk808s;
>> nr_cells = ARRAY_SIZE(rk808s);
>> pm_pwroff_fn = rk808_device_shutdown;
>> + rk808->nb = &rk808_restart_handler;
>> break;
>> case RK818_ID:
>> rk808->regmap_cfg = &rk818_regmap_config;
>> @@ -494,6 +511,7 @@ static int rk808_probe(struct i2c_client *client,
>> cells = rk818s;
>> nr_cells = ARRAY_SIZE(rk818s);
>> pm_pwroff_fn = rk818_device_shutdown;
>> + rk808->nb = &rk818_restart_handler;
>> break;
>> default:
>> dev_err(&client->dev, "Unsupported RK8XX ID %lu\n",
>> @@ -546,11 +564,18 @@ static int rk808_probe(struct i2c_client *client,
>>
>> pm_off = of_property_read_bool(np,
>> "rockchip,system-power-controller");
>> - if (pm_off && !pm_power_off) {
>> + if (pm_off) {
>> rk808_i2c_client = client;
>> - pm_power_off = pm_pwroff_fn;
>> + if (!pm_power_off)
>> + pm_power_off = pm_pwroff_fn;
>> + if (rk808->nb) {
>> + ret = register_restart_handler(rk808->nb);
>> + if (ret)
>> + dev_err(&client->dev,
>> + "cannot register restart handler, %d\n",
>> + ret);
>> + }
>> }
>> -
>> return 0;
>>
>> err_irq:
>> @@ -564,6 +589,8 @@ static int rk808_remove(struct i2c_client *client)
>>
>> regmap_del_irq_chip(client->irq, rk808->irq_data);
>> pm_power_off = NULL;
>> + if (rk808->nb)
>> + unregister_restart_handler(rk808->nb);
>>
>> return 0;
>> }
>> diff --git a/include/linux/mfd/rk808.h b/include/linux/mfd/rk808.h
>> index 338e0f6..9c26ca2 100644
>> --- a/include/linux/mfd/rk808.h
>> +++ b/include/linux/mfd/rk808.h
>> @@ -453,5 +453,6 @@ struct rk808 {
>> long variant;
>> const struct regmap_config *regmap_cfg;
>> const struct regmap_irq_chip *regmap_irq_chip;
>> + struct notifier_block *nb;
>> };
>> #endif /* __LINUX_REGULATOR_RK808_H */
--
Best Regards
----------------------------------------------------------------------------
陈健洪 (Joseph Chen)
E-mail：chenjh@...k-chips.com
福州瑞芯微电子股份有限公司
Fuzhou Rockchip Electronics Co.Ltd
福建省福州市铜盘路软件大道89号软件园A区21号楼 (350003)
No. 21 Building, A District, No.89,software Boulevard Fuzhou,Fujian,PRC
TEL：0591-83991906/07-8573
Powered by blists - more mailing lists