[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20180315234334.GA3432@bigcity.dyn.berto.se>
Date: Fri, 16 Mar 2018 00:43:34 +0100
From: Niklas Söderlund
<niklas.soderlund@...natech.se>
To: Jacopo Mondi <jacopo+renesas@...ndi.org>
Cc: architt@...eaurora.org, a.hajda@...sung.com,
Laurent.pinchart@...asonboard.com, airlied@...ux.ie,
horms@...ge.net.au, magnus.damm@...il.com, geert@...ux-m68k.org,
sergei.shtylyov@...entembedded.com, robh+dt@...nel.org,
mark.rutland@....com, dri-devel@...ts.freedesktop.org,
linux-renesas-soc@...r.kernel.org, devicetree@...r.kernel.org,
linux-kernel@...r.kernel.org
Subject: Re: [PATCH v5 1/3] dt-bindings: display: bridge: Document
THC63LVD1024 LVDS decoder
Hi Jacopo,
Thanks for your patch,
On 2018-03-15 17:11:54 +0100, Jacopo Mondi wrote:
> Document Thine THC63LVD1024 LVDS decoder device tree bindings.
>
> Signed-off-by: Jacopo Mondi <jacopo+renesas@...ndi.org>
> Reviewed-by: Andrzej Hajda <a.hajda@...sung.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@...natech.se>
> ---
> .../bindings/display/bridge/thine,thc63lvd1024.txt | 66 ++++++++++++++++++++++
> 1 file changed, 66 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/display/bridge/thine,thc63lvd1024.txt
>
> diff --git a/Documentation/devicetree/bindings/display/bridge/thine,thc63lvd1024.txt b/Documentation/devicetree/bindings/display/bridge/thine,thc63lvd1024.txt
> new file mode 100644
> index 0000000..8225c6a
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/display/bridge/thine,thc63lvd1024.txt
> @@ -0,0 +1,66 @@
> +Thine Electronics THC63LVD1024 LVDS decoder
> +-------------------------------------------
> +
> +The THC63LVD1024 is a dual link LVDS receiver designed to convert LVDS streams
> +to parallel data outputs. The chip supports single/dual input/output modes,
> +handling up to two two input LVDS stream and up to two digital CMOS/TTL outputs.
> +
> +Single or dual operation modes, output data mapping and DDR output modes are
> +configured through input signals and the chip does not expose any control bus.
> +
> +Required properties:
> +- compatible: Shall be "thine,thc63lvd1024"
> +
> +Optional properties:
> +- vcc-supply: Power supply for TTL output and digital circuitry
> +- cvcc-supply: Power supply for TTL CLOCKOUT signal
> +- lvcc-supply: Power supply for LVDS inputs
> +- pvcc-supply: Power supply for PLL circuitry
> +- pdwn-gpios: Power down GPIO signal. Active low
> +- oe-gpios: Output enable GPIO signal. Active high
> +
> +The THC63LVD1024 video port connections are modeled according
> +to OF graph bindings specified by Documentation/devicetree/bindings/graph.txt
> +
> +Required video port nodes:
> +- Port@0: First LVDS input port
> +- Port@2: First digital CMOS/TTL parallel output
> +
> +Optional video port nodes:
> +- Port@1: Second LVDS input port
> +- Port@3: Second digital CMOS/TTL parallel output
> +
> +Example:
> +--------
> +
> + thc63lvd1024: lvds-decoder {
> + compatible = "thine,thc63lvd1024";
> +
> + vcc-supply = <®_lvds_vcc>;
> + lvcc-supply = <®_lvds_lvcc>;
> +
> + pdwn-gpio = <&gpio4 15 GPIO_ACTIVE_LOW>;
> +
> + ports {
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + port@0 {
> + reg = <0>;
> +
> + lvds_dec_in_0: endpoint {
> + remote-endpoint = <&lvds_out>;
> + };
> + };
> +
> + port@2{
> + reg = <2>;
> +
> + lvds_dec_out_2: endpoint {
> + remote-endpoint = <&adv7511_in>;
> + };
> +
> + };
> +
> + };
> + };
> --
> 2.7.4
>
--
Regards,
Niklas Söderlund
Powered by blists - more mailing lists