Message-ID: <1521184106-24475-14-git-send-email-aaron.wu@analog.com>
Date:   Fri, 16 Mar 2018 15:08:14 +0800
From:   Aaron Wu <aaron.wu@...log.com>
To:     <linux-kernel@...r.kernel.org>
CC:     <aaron.wu@...log.com>
Subject: [Blackfin removal] [PATCH 16/28] irda: Remove Blackfin IRDA support

Signed-off-by: Aaron Wu <aaron.wu@...log.com>

Remove Blackfin IRDA support
---
 drivers/staging/irda/drivers/Kconfig    |  45 --
 drivers/staging/irda/drivers/Makefile   |   1 -
 drivers/staging/irda/drivers/bfin_sir.c | 819 --------------------------------
 drivers/staging/irda/drivers/bfin_sir.h |  93 ----
 4 files changed, 958 deletions(-)
 delete mode 100644 drivers/staging/irda/drivers/bfin_sir.c
 delete mode 100644 drivers/staging/irda/drivers/bfin_sir.h

diff --git a/drivers/staging/irda/drivers/Kconfig b/drivers/staging/irda/drivers/Kconfig
index e070e12..71ac76c 100644
--- a/drivers/staging/irda/drivers/Kconfig
+++ b/drivers/staging/irda/drivers/Kconfig
@@ -17,51 +17,6 @@ config IRTTY_SIR
 
 	  If unsure, say Y.
 
-config BFIN_SIR
-	tristate "Blackfin SIR on UART"
-	depends on BLACKFIN && IRDA
-	default n
-	help
-	  Say Y here if your want to enable SIR function on Blackfin UART
-	  devices.
-
-	  To activate this driver you can start irattach like:
-	  "irattach irda0 -s"
-
-	  Saying M, it will be built as a module named bfin_sir.
-
-	  Note that you need to turn off one of the serial drivers for SIR
-	  to use that UART.
-
-config BFIN_SIR0
-	bool "Blackfin SIR on UART0"
-	depends on BFIN_SIR && !SERIAL_BFIN_UART0
-
-config BFIN_SIR1
-	bool "Blackfin SIR on UART1"
-	depends on BFIN_SIR && !SERIAL_BFIN_UART1 && (!BF531 && !BF532 && !BF533 && !BF561)
-
-config BFIN_SIR2
-	bool "Blackfin SIR on UART2"
-	depends on BFIN_SIR && !SERIAL_BFIN_UART2 && (BF54x || BF538 || BF539)
-
-config BFIN_SIR3
-	bool "Blackfin SIR on UART3"
-	depends on BFIN_SIR && !SERIAL_BFIN_UART3 && (BF54x)
-
-choice
-	prompt "SIR Mode"
-	depends on BFIN_SIR
-	default SIR_BFIN_DMA
-
-config SIR_BFIN_DMA
-	bool "DMA mode"
-	depends on !DMA_UNCACHED_NONE
-
-config SIR_BFIN_PIO
-	bool "PIO mode"
-endchoice
-
 config SH_SIR
 	tristate "SuperH SIR on UART"
 	depends on IRDA && SUPERH && \
diff --git a/drivers/staging/irda/drivers/Makefile b/drivers/staging/irda/drivers/Makefile
index e2901b1..d5307ed 100644
--- a/drivers/staging/irda/drivers/Makefile
+++ b/drivers/staging/irda/drivers/Makefile
@@ -23,7 +23,6 @@ obj-$(CONFIG_MCS_FIR)	        += mcs7780.o
 obj-$(CONFIG_AU1000_FIR)	+= au1k_ir.o
 # SIR drivers
 obj-$(CONFIG_IRTTY_SIR)		+= irtty-sir.o	sir-dev.o
-obj-$(CONFIG_BFIN_SIR)		+= bfin_sir.o
 obj-$(CONFIG_SH_SIR)		+= sh_sir.o
 # dongle drivers for SIR drivers
 obj-$(CONFIG_ESI_DONGLE)	+= esi-sir.o
diff --git a/drivers/staging/irda/drivers/bfin_sir.c b/drivers/staging/irda/drivers/bfin_sir.c
deleted file mode 100644
index 59e409b..0000000
--- a/drivers/staging/irda/drivers/bfin_sir.c
+++ /dev/null
@@ -1,819 +0,0 @@
-/*
- * Blackfin Infra-red Driver
- *
- * Copyright 2006-2009 Analog Devices Inc.
- *
- * Enter bugs at http://blackfin.uclinux.org/
- *
- * Licensed under the GPL-2 or later.
- *
- */
-#include "bfin_sir.h"
-
-#ifdef CONFIG_SIR_BFIN_DMA
-#define DMA_SIR_RX_XCNT        10
-#define DMA_SIR_RX_YCNT        (PAGE_SIZE / DMA_SIR_RX_XCNT)
-#define DMA_SIR_RX_FLUSH_JIFS  (HZ * 4 / 250)
-#endif
-
-#if ANOMALY_05000447
-static int max_rate = 57600;
-#else
-static int max_rate = 115200;
-#endif
-
-static void bfin_sir_rx_dma_timeout(struct timer_list *t);
-
-static void turnaround_delay(int mtt)
-{
-	long ticks;
-
-	mtt = mtt < 10000 ? 10000 : mtt;
-	ticks = 1 + mtt / (USEC_PER_SEC / HZ);
-	schedule_timeout_uninterruptible(ticks);
-}
-
-static void bfin_sir_init_ports(struct bfin_sir_port *sp, struct platform_device *pdev)
-{
-	int i;
-	struct resource *res;
-
-	for (i = 0; i < pdev->num_resources; i++) {
-		res = &pdev->resource[i];
-		switch (res->flags) {
-		case IORESOURCE_MEM:
-			sp->membase   = (void __iomem *)res->start;
-			break;
-		case IORESOURCE_IRQ:
-			sp->irq = res->start;
-			break;
-		case IORESOURCE_DMA:
-			sp->rx_dma_channel = res->start;
-			sp->tx_dma_channel = res->end;
-			break;
-		default:
-			break;
-		}
-	}
-
-	sp->clk = get_sclk();
-#ifdef CONFIG_SIR_BFIN_DMA
-	sp->tx_done        = 1;
-	timer_setup(&sp->rx_dma_timer, bfin_sir_rx_dma_timeout, 0);
-#endif
-}
-
-static void bfin_sir_stop_tx(struct bfin_sir_port *port)
-{
-#ifdef CONFIG_SIR_BFIN_DMA
-	disable_dma(port->tx_dma_channel);
-#endif
-
-	while (!(UART_GET_LSR(port) & THRE)) {
-		cpu_relax();
-		continue;
-	}
-
-	UART_CLEAR_IER(port, ETBEI);
-}
-
-static void bfin_sir_enable_tx(struct bfin_sir_port *port)
-{
-	UART_SET_IER(port, ETBEI);
-}
-
-static void bfin_sir_stop_rx(struct bfin_sir_port *port)
-{
-	UART_CLEAR_IER(port, ERBFI);
-}
-
-static void bfin_sir_enable_rx(struct bfin_sir_port *port)
-{
-	UART_SET_IER(port, ERBFI);
-}
-
-static int bfin_sir_set_speed(struct bfin_sir_port *port, int speed)
-{
-	int ret = -EINVAL;
-	unsigned int quot;
-	unsigned short val, lsr, lcr;
-	static int utime;
-	int count = 10;
-
-	lcr = WLS(8);
-
-	switch (speed) {
-	case 9600:
-	case 19200:
-	case 38400:
-	case 57600:
-	case 115200:
-
-		/*
-		 * IRDA is not affected by anomaly 05000230, so there is no
-		 * need to tweak the divisor like he UART driver (which will
-		 * slightly speed up the baud rate on us).
-		 */
-		quot = (port->clk + (8 * speed)) / (16 * speed);
-
-		do {
-			udelay(utime);
-			lsr = UART_GET_LSR(port);
-		} while (!(lsr & TEMT) && count--);
-
-		/* The useconds for 1 bits to transmit */
-		utime = 1000000 / speed + 1;
-
-		/* Clear UCEN bit to reset the UART state machine
-		 * and control registers
-		 */
-		val = UART_GET_GCTL(port);
-		val &= ~UCEN;
-		UART_PUT_GCTL(port, val);
-
-		/* Set DLAB in LCR to Access THR RBR IER */
-		UART_SET_DLAB(port);
-		SSYNC();
-
-		UART_PUT_DLL(port, quot & 0xFF);
-		UART_PUT_DLH(port, (quot >> 8) & 0xFF);
-		SSYNC();
-
-		/* Clear DLAB in LCR */
-		UART_CLEAR_DLAB(port);
-		SSYNC();
-
-		UART_PUT_LCR(port, lcr);
-
-		val = UART_GET_GCTL(port);
-		val |= UCEN;
-		UART_PUT_GCTL(port, val);
-
-		ret = 0;
-		break;
-	default:
-		printk(KERN_WARNING "bfin_sir: Invalid speed %d\n", speed);
-		break;
-	}
-
-	val = UART_GET_GCTL(port);
-	/* If not add the 'RPOLC', we can't catch the receive interrupt.
-	 * It's related with the HW layout and the IR transiver.
-	 */
-	val |= UMOD_IRDA | RPOLC;
-	UART_PUT_GCTL(port, val);
-	return ret;
-}
-
-static int bfin_sir_is_receiving(struct net_device *dev)
-{
-	struct bfin_sir_self *self = netdev_priv(dev);
-	struct bfin_sir_port *port = self->sir_port;
-
-	if (!(UART_GET_IER(port) & ERBFI))
-		return 0;
-	return self->rx_buff.state != OUTSIDE_FRAME;
-}
-
-#ifdef CONFIG_SIR_BFIN_PIO
-static void bfin_sir_tx_chars(struct net_device *dev)
-{
-	unsigned int chr;
-	struct bfin_sir_self *self = netdev_priv(dev);
-	struct bfin_sir_port *port = self->sir_port;
-
-	if (self->tx_buff.len != 0) {
-		chr = *(self->tx_buff.data);
-		UART_PUT_CHAR(port, chr);
-		self->tx_buff.data++;
-		self->tx_buff.len--;
-	} else {
-		self->stats.tx_packets++;
-		self->stats.tx_bytes += self->tx_buff.data - self->tx_buff.head;
-		if (self->newspeed) {
-			bfin_sir_set_speed(port, self->newspeed);
-			self->speed = self->newspeed;
-			self->newspeed = 0;
-		}
-		bfin_sir_stop_tx(port);
-		bfin_sir_enable_rx(port);
-		/* I'm hungry! */
-		netif_wake_queue(dev);
-	}
-}
-
-static void bfin_sir_rx_chars(struct net_device *dev)
-{
-	struct bfin_sir_self *self = netdev_priv(dev);
-	struct bfin_sir_port *port = self->sir_port;
-	unsigned char ch;
-
-	UART_CLEAR_LSR(port);
-	ch = UART_GET_CHAR(port);
-	async_unwrap_char(dev, &self->stats, &self->rx_buff, ch);
-}
-
-static irqreturn_t bfin_sir_rx_int(int irq, void *dev_id)
-{
-	struct net_device *dev = dev_id;
-	struct bfin_sir_self *self = netdev_priv(dev);
-	struct bfin_sir_port *port = self->sir_port;
-
-	spin_lock(&self->lock);
-	while ((UART_GET_LSR(port) & DR))
-		bfin_sir_rx_chars(dev);
-	spin_unlock(&self->lock);
-
-	return IRQ_HANDLED;
-}
-
-static irqreturn_t bfin_sir_tx_int(int irq, void *dev_id)
-{
-	struct net_device *dev = dev_id;
-	struct bfin_sir_self *self = netdev_priv(dev);
-	struct bfin_sir_port *port = self->sir_port;
-
-	spin_lock(&self->lock);
-	if (UART_GET_LSR(port) & THRE)
-		bfin_sir_tx_chars(dev);
-	spin_unlock(&self->lock);
-
-	return IRQ_HANDLED;
-}
-#endif /* CONFIG_SIR_BFIN_PIO */
-
-#ifdef CONFIG_SIR_BFIN_DMA
-static void bfin_sir_dma_tx_chars(struct net_device *dev)
-{
-	struct bfin_sir_self *self = netdev_priv(dev);
-	struct bfin_sir_port *port = self->sir_port;
-
-	if (!port->tx_done)
-		return;
-	port->tx_done = 0;
-
-	if (self->tx_buff.len == 0) {
-		self->stats.tx_packets++;
-		if (self->newspeed) {
-			bfin_sir_set_speed(port, self->newspeed);
-			self->speed = self->newspeed;
-			self->newspeed = 0;
-		}
-		bfin_sir_enable_rx(port);
-		port->tx_done = 1;
-		netif_wake_queue(dev);
-		return;
-	}
-
-	blackfin_dcache_flush_range((unsigned long)(self->tx_buff.data),
-		(unsigned long)(self->tx_buff.data+self->tx_buff.len));
-	set_dma_config(port->tx_dma_channel,
-		set_bfin_dma_config(DIR_READ, DMA_FLOW_STOP,
-			INTR_ON_BUF, DIMENSION_LINEAR, DATA_SIZE_8,
-			DMA_SYNC_RESTART));
-	set_dma_start_addr(port->tx_dma_channel,
-		(unsigned long)(self->tx_buff.data));
-	set_dma_x_count(port->tx_dma_channel, self->tx_buff.len);
-	set_dma_x_modify(port->tx_dma_channel, 1);
-	enable_dma(port->tx_dma_channel);
-}
-
-static irqreturn_t bfin_sir_dma_tx_int(int irq, void *dev_id)
-{
-	struct net_device *dev = dev_id;
-	struct bfin_sir_self *self = netdev_priv(dev);
-	struct bfin_sir_port *port = self->sir_port;
-
-	spin_lock(&self->lock);
-	if (!(get_dma_curr_irqstat(port->tx_dma_channel) & DMA_RUN)) {
-		clear_dma_irqstat(port->tx_dma_channel);
-		bfin_sir_stop_tx(port);
-
-		self->stats.tx_packets++;
-		self->stats.tx_bytes += self->tx_buff.len;
-		self->tx_buff.len = 0;
-		if (self->newspeed) {
-			bfin_sir_set_speed(port, self->newspeed);
-			self->speed = self->newspeed;
-			self->newspeed = 0;
-		}
-		bfin_sir_enable_rx(port);
-		/* I'm hungry! */
-		netif_wake_queue(dev);
-		port->tx_done = 1;
-	}
-	spin_unlock(&self->lock);
-
-	return IRQ_HANDLED;
-}
-
-static void bfin_sir_dma_rx_chars(struct net_device *dev)
-{
-	struct bfin_sir_self *self = netdev_priv(dev);
-	struct bfin_sir_port *port = self->sir_port;
-	int i;
-
-	UART_CLEAR_LSR(port);
-
-	for (i = port->rx_dma_buf.head; i < port->rx_dma_buf.tail; i++)
-		async_unwrap_char(dev, &self->stats, &self->rx_buff, port->rx_dma_buf.buf[i]);
-}
-
-static void bfin_sir_rx_dma_timeout(struct timer_list *t)
-{
-	struct bfin_sir_port *port = from_timer(port, t, rx_dma_timer);
-	struct net_device *dev = port->dev;
-	struct bfin_sir_self *self = netdev_priv(dev);
-
-	int x_pos, pos;
-	unsigned long flags;
-
-	spin_lock_irqsave(&self->lock, flags);
-	x_pos = DMA_SIR_RX_XCNT - get_dma_curr_xcount(port->rx_dma_channel);
-	if (x_pos == DMA_SIR_RX_XCNT)
-		x_pos = 0;
-
-	pos = port->rx_dma_nrows * DMA_SIR_RX_XCNT + x_pos;
-
-	if (pos > port->rx_dma_buf.tail) {
-		port->rx_dma_buf.tail = pos;
-		bfin_sir_dma_rx_chars(dev);
-		port->rx_dma_buf.head = port->rx_dma_buf.tail;
-	}
-	spin_unlock_irqrestore(&self->lock, flags);
-}
-
-static irqreturn_t bfin_sir_dma_rx_int(int irq, void *dev_id)
-{
-	struct net_device *dev = dev_id;
-	struct bfin_sir_self *self = netdev_priv(dev);
-	struct bfin_sir_port *port = self->sir_port;
-	unsigned short irqstat;
-
-	spin_lock(&self->lock);
-
-	port->rx_dma_nrows++;
-	port->rx_dma_buf.tail = DMA_SIR_RX_XCNT * port->rx_dma_nrows;
-	bfin_sir_dma_rx_chars(dev);
-	if (port->rx_dma_nrows >= DMA_SIR_RX_YCNT) {
-		port->rx_dma_nrows = 0;
-		port->rx_dma_buf.tail = 0;
-	}
-	port->rx_dma_buf.head = port->rx_dma_buf.tail;
-
-	irqstat = get_dma_curr_irqstat(port->rx_dma_channel);
-	clear_dma_irqstat(port->rx_dma_channel);
-	spin_unlock(&self->lock);
-
-	mod_timer(&port->rx_dma_timer, jiffies + DMA_SIR_RX_FLUSH_JIFS);
-	return IRQ_HANDLED;
-}
-#endif /* CONFIG_SIR_BFIN_DMA */
-
-static int bfin_sir_startup(struct bfin_sir_port *port, struct net_device *dev)
-{
-#ifdef CONFIG_SIR_BFIN_DMA
-	dma_addr_t dma_handle;
-#endif /* CONFIG_SIR_BFIN_DMA */
-
-	if (request_dma(port->rx_dma_channel, "BFIN_UART_RX") < 0) {
-		dev_warn(&dev->dev, "Unable to attach SIR RX DMA channel\n");
-		return -EBUSY;
-	}
-
-	if (request_dma(port->tx_dma_channel, "BFIN_UART_TX") < 0) {
-		dev_warn(&dev->dev, "Unable to attach SIR TX DMA channel\n");
-		free_dma(port->rx_dma_channel);
-		return -EBUSY;
-	}
-
-#ifdef CONFIG_SIR_BFIN_DMA
-
-	set_dma_callback(port->rx_dma_channel, bfin_sir_dma_rx_int, dev);
-	set_dma_callback(port->tx_dma_channel, bfin_sir_dma_tx_int, dev);
-
-	port->rx_dma_buf.buf = dma_alloc_coherent(NULL, PAGE_SIZE,
-						  &dma_handle, GFP_DMA);
-	port->rx_dma_buf.head = 0;
-	port->rx_dma_buf.tail = 0;
-	port->rx_dma_nrows = 0;
-
-	set_dma_config(port->rx_dma_channel,
-				set_bfin_dma_config(DIR_WRITE, DMA_FLOW_AUTO,
-									INTR_ON_ROW, DIMENSION_2D,
-									DATA_SIZE_8, DMA_SYNC_RESTART));
-	set_dma_x_count(port->rx_dma_channel, DMA_SIR_RX_XCNT);
-	set_dma_x_modify(port->rx_dma_channel, 1);
-	set_dma_y_count(port->rx_dma_channel, DMA_SIR_RX_YCNT);
-	set_dma_y_modify(port->rx_dma_channel, 1);
-	set_dma_start_addr(port->rx_dma_channel, (unsigned long)port->rx_dma_buf.buf);
-	enable_dma(port->rx_dma_channel);
-
-
-#else
-
-	if (request_irq(port->irq, bfin_sir_rx_int, 0, "BFIN_SIR_RX", dev)) {
-		dev_warn(&dev->dev, "Unable to attach SIR RX interrupt\n");
-		return -EBUSY;
-	}
-
-	if (request_irq(port->irq+1, bfin_sir_tx_int, 0, "BFIN_SIR_TX", dev)) {
-		dev_warn(&dev->dev, "Unable to attach SIR TX interrupt\n");
-		free_irq(port->irq, dev);
-		return -EBUSY;
-	}
-#endif
-
-	return 0;
-}
-
-static void bfin_sir_shutdown(struct bfin_sir_port *port, struct net_device *dev)
-{
-	unsigned short val;
-
-	bfin_sir_stop_rx(port);
-
-	val = UART_GET_GCTL(port);
-	val &= ~(UCEN | UMOD_MASK | RPOLC);
-	UART_PUT_GCTL(port, val);
-
-#ifdef CONFIG_SIR_BFIN_DMA
-	disable_dma(port->tx_dma_channel);
-	disable_dma(port->rx_dma_channel);
-	del_timer(&(port->rx_dma_timer));
-	dma_free_coherent(NULL, PAGE_SIZE, port->rx_dma_buf.buf, 0);
-#else
-	free_irq(port->irq+1, dev);
-	free_irq(port->irq, dev);
-#endif
-	free_dma(port->tx_dma_channel);
-	free_dma(port->rx_dma_channel);
-}
-
-#ifdef CONFIG_PM
-static int bfin_sir_suspend(struct platform_device *pdev, pm_message_t state)
-{
-	struct bfin_sir_port *sir_port;
-	struct net_device *dev;
-	struct bfin_sir_self *self;
-
-	sir_port = platform_get_drvdata(pdev);
-	if (!sir_port)
-		return 0;
-
-	dev = sir_port->dev;
-	self = netdev_priv(dev);
-	if (self->open) {
-		flush_work(&self->work);
-		bfin_sir_shutdown(self->sir_port, dev);
-		netif_device_detach(dev);
-	}
-
-	return 0;
-}
-static int bfin_sir_resume(struct platform_device *pdev)
-{
-	struct bfin_sir_port *sir_port;
-	struct net_device *dev;
-	struct bfin_sir_self *self;
-	struct bfin_sir_port *port;
-
-	sir_port = platform_get_drvdata(pdev);
-	if (!sir_port)
-		return 0;
-
-	dev = sir_port->dev;
-	self = netdev_priv(dev);
-	port = self->sir_port;
-	if (self->open) {
-		if (self->newspeed) {
-			self->speed = self->newspeed;
-			self->newspeed = 0;
-		}
-		bfin_sir_startup(port, dev);
-		bfin_sir_set_speed(port, 9600);
-		bfin_sir_enable_rx(port);
-		netif_device_attach(dev);
-	}
-	return 0;
-}
-#else
-#define bfin_sir_suspend   NULL
-#define bfin_sir_resume    NULL
-#endif
-
-static void bfin_sir_send_work(struct work_struct *work)
-{
-	struct bfin_sir_self  *self = container_of(work, struct bfin_sir_self, work);
-	struct net_device *dev = self->sir_port->dev;
-	struct bfin_sir_port *port = self->sir_port;
-	unsigned short val;
-	int tx_cnt = 10;
-
-	while (bfin_sir_is_receiving(dev) && --tx_cnt)
-		turnaround_delay(self->mtt);
-
-	bfin_sir_stop_rx(port);
-
-	/* To avoid losting RX interrupt, we reset IR function before
-	 * sending data. We also can set the speed, which will
-	 * reset all the UART.
-	 */
-	val = UART_GET_GCTL(port);
-	val &= ~(UMOD_MASK | RPOLC);
-	UART_PUT_GCTL(port, val);
-	SSYNC();
-	val |= UMOD_IRDA | RPOLC;
-	UART_PUT_GCTL(port, val);
-	SSYNC();
-	/* bfin_sir_set_speed(port, self->speed); */
-
-#ifdef CONFIG_SIR_BFIN_DMA
-	bfin_sir_dma_tx_chars(dev);
-#endif
-	bfin_sir_enable_tx(port);
-	netif_trans_update(dev);
-}
-
-static int bfin_sir_hard_xmit(struct sk_buff *skb, struct net_device *dev)
-{
-	struct bfin_sir_self *self = netdev_priv(dev);
-	int speed = irda_get_next_speed(skb);
-
-	netif_stop_queue(dev);
-
-	self->mtt = irda_get_mtt(skb);
-
-	if (speed != self->speed && speed != -1)
-		self->newspeed = speed;
-
-	self->tx_buff.data = self->tx_buff.head;
-	if (skb->len == 0)
-		self->tx_buff.len = 0;
-	else
-		self->tx_buff.len = async_wrap_skb(skb, self->tx_buff.data, self->tx_buff.truesize);
-
-	schedule_work(&self->work);
-	dev_kfree_skb(skb);
-
-	return 0;
-}
-
-static int bfin_sir_ioctl(struct net_device *dev, struct ifreq *ifreq, int cmd)
-{
-	struct if_irda_req *rq = (struct if_irda_req *)ifreq;
-	struct bfin_sir_self *self = netdev_priv(dev);
-	struct bfin_sir_port *port = self->sir_port;
-	int ret = 0;
-
-	switch (cmd) {
-	case SIOCSBANDWIDTH:
-		if (capable(CAP_NET_ADMIN)) {
-			if (self->open) {
-				ret = bfin_sir_set_speed(port, rq->ifr_baudrate);
-				bfin_sir_enable_rx(port);
-			} else {
-				dev_warn(&dev->dev, "SIOCSBANDWIDTH: !netif_running\n");
-				ret = 0;
-			}
-		}
-		break;
-
-	case SIOCSMEDIABUSY:
-		ret = -EPERM;
-		if (capable(CAP_NET_ADMIN)) {
-			irda_device_set_media_busy(dev, TRUE);
-			ret = 0;
-		}
-		break;
-
-	case SIOCGRECEIVING:
-		rq->ifr_receiving = bfin_sir_is_receiving(dev);
-		break;
-
-	default:
-		ret = -EOPNOTSUPP;
-		break;
-	}
-
-	return ret;
-}
-
-static struct net_device_stats *bfin_sir_stats(struct net_device *dev)
-{
-	struct bfin_sir_self *self = netdev_priv(dev);
-
-	return &self->stats;
-}
-
-static int bfin_sir_open(struct net_device *dev)
-{
-	struct bfin_sir_self *self = netdev_priv(dev);
-	struct bfin_sir_port *port = self->sir_port;
-	int err;
-
-	self->newspeed = 0;
-	self->speed = 9600;
-
-	spin_lock_init(&self->lock);
-
-	err = bfin_sir_startup(port, dev);
-	if (err)
-		goto err_startup;
-
-	bfin_sir_set_speed(port, 9600);
-
-	self->irlap = irlap_open(dev, &self->qos, DRIVER_NAME);
-	if (!self->irlap) {
-		err = -ENOMEM;
-		goto err_irlap;
-	}
-
-	INIT_WORK(&self->work, bfin_sir_send_work);
-
-	/*
-	 * Now enable the interrupt then start the queue
-	 */
-	self->open = 1;
-	bfin_sir_enable_rx(port);
-
-	netif_start_queue(dev);
-
-	return 0;
-
-err_irlap:
-	self->open = 0;
-	bfin_sir_shutdown(port, dev);
-err_startup:
-	return err;
-}
-
-static int bfin_sir_stop(struct net_device *dev)
-{
-	struct bfin_sir_self *self = netdev_priv(dev);
-
-	flush_work(&self->work);
-	bfin_sir_shutdown(self->sir_port, dev);
-
-	if (self->rxskb) {
-		dev_kfree_skb(self->rxskb);
-		self->rxskb = NULL;
-	}
-
-	/* Stop IrLAP */
-	if (self->irlap) {
-		irlap_close(self->irlap);
-		self->irlap = NULL;
-	}
-
-	netif_stop_queue(dev);
-	self->open = 0;
-
-	return 0;
-}
-
-static int bfin_sir_init_iobuf(iobuff_t *io, int size)
-{
-	io->head = kmalloc(size, GFP_KERNEL);
-	if (!io->head)
-		return -ENOMEM;
-	io->truesize = size;
-	io->in_frame = FALSE;
-	io->state    = OUTSIDE_FRAME;
-	io->data     = io->head;
-	return 0;
-}
-
-static const struct net_device_ops bfin_sir_ndo = {
-	.ndo_open		= bfin_sir_open,
-	.ndo_stop		= bfin_sir_stop,
-	.ndo_start_xmit		= bfin_sir_hard_xmit,
-	.ndo_do_ioctl		= bfin_sir_ioctl,
-	.ndo_get_stats		= bfin_sir_stats,
-};
-
-static int bfin_sir_probe(struct platform_device *pdev)
-{
-	struct net_device *dev;
-	struct bfin_sir_self *self;
-	unsigned int baudrate_mask;
-	struct bfin_sir_port *sir_port;
-	int err;
-
-	if (pdev->id >= 0 && pdev->id < ARRAY_SIZE(per) && \
-				per[pdev->id][3] == pdev->id) {
-		err = peripheral_request_list(per[pdev->id], DRIVER_NAME);
-		if (err)
-			return err;
-	} else {
-		dev_err(&pdev->dev, "Invalid pdev id, please check board file\n");
-		return -ENODEV;
-	}
-
-	err = -ENOMEM;
-	sir_port = kmalloc(sizeof(*sir_port), GFP_KERNEL);
-	if (!sir_port)
-		goto err_mem_0;
-
-	bfin_sir_init_ports(sir_port, pdev);
-
-	dev = alloc_irdadev(sizeof(*self));
-	if (!dev)
-		goto err_mem_1;
-
-	self = netdev_priv(dev);
-	self->dev = &pdev->dev;
-	self->sir_port = sir_port;
-	sir_port->dev = dev;
-
-	err = bfin_sir_init_iobuf(&self->rx_buff, IRDA_SKB_MAX_MTU);
-	if (err)
-		goto err_mem_2;
-	err = bfin_sir_init_iobuf(&self->tx_buff, IRDA_SIR_MAX_FRAME);
-	if (err)
-		goto err_mem_3;
-
-	dev->netdev_ops = &bfin_sir_ndo;
-	dev->irq = sir_port->irq;
-
-	irda_init_max_qos_capabilies(&self->qos);
-
-	baudrate_mask = IR_9600;
-
-	switch (max_rate) {
-	case 115200:
-		baudrate_mask |= IR_115200;
-	case 57600:
-		baudrate_mask |= IR_57600;
-	case 38400:
-		baudrate_mask |= IR_38400;
-	case 19200:
-		baudrate_mask |= IR_19200;
-	case 9600:
-		break;
-	default:
-		dev_warn(&pdev->dev, "Invalid maximum baud rate, using 9600\n");
-	}
-
-	self->qos.baud_rate.bits &= baudrate_mask;
-
-	self->qos.min_turn_time.bits = 1; /* 10 ms or more */
-
-	irda_qos_bits_to_value(&self->qos);
-
-	err = register_netdev(dev);
-
-	if (err) {
-		kfree(self->tx_buff.head);
-err_mem_3:
-		kfree(self->rx_buff.head);
-err_mem_2:
-		free_netdev(dev);
-err_mem_1:
-		kfree(sir_port);
-err_mem_0:
-		peripheral_free_list(per[pdev->id]);
-	} else
-		platform_set_drvdata(pdev, sir_port);
-
-	return err;
-}
-
-static int bfin_sir_remove(struct platform_device *pdev)
-{
-	struct bfin_sir_port *sir_port;
-	struct net_device *dev = NULL;
-	struct bfin_sir_self *self;
-
-	sir_port = platform_get_drvdata(pdev);
-	if (!sir_port)
-		return 0;
-	dev = sir_port->dev;
-	self = netdev_priv(dev);
-	unregister_netdev(dev);
-	kfree(self->tx_buff.head);
-	kfree(self->rx_buff.head);
-	free_netdev(dev);
-	kfree(sir_port);
-
-	return 0;
-}
-
-static struct platform_driver bfin_ir_driver = {
-	.probe   = bfin_sir_probe,
-	.remove  = bfin_sir_remove,
-	.suspend = bfin_sir_suspend,
-	.resume  = bfin_sir_resume,
-	.driver  = {
-		.name = DRIVER_NAME,
-	},
-};
-
-module_platform_driver(bfin_ir_driver);
-
-module_param(max_rate, int, 0);
-MODULE_PARM_DESC(max_rate, "Maximum baud rate (115200, 57600, 38400, 19200, 9600)");
-
-MODULE_AUTHOR("Graf Yang <graf.yang@...log.com>");
-MODULE_DESCRIPTION("Blackfin IrDA driver");
-MODULE_LICENSE("GPL");
diff --git a/drivers/staging/irda/drivers/bfin_sir.h b/drivers/staging/irda/drivers/bfin_sir.h
deleted file mode 100644
index d47cf14..0000000
--- a/drivers/staging/irda/drivers/bfin_sir.h
+++ /dev/null
@@ -1,93 +0,0 @@
-/*
- * Blackfin Infra-red Driver
- *
- * Copyright 2006-2009 Analog Devices Inc.
- *
- * Enter bugs at http://blackfin.uclinux.org/
- *
- * Licensed under the GPL-2 or later.
- *
- */
-
-#include <linux/serial.h>
-#include <linux/module.h>
-#include <linux/netdevice.h>
-#include <linux/interrupt.h>
-#include <linux/delay.h>
-#include <linux/platform_device.h>
-#include <linux/dma-mapping.h>
-#include <linux/slab.h>
-
-#include <net/irda/irda.h>
-#include <net/irda/wrapper.h>
-#include <net/irda/irda_device.h>
-
-#include <asm/irq.h>
-#include <asm/cacheflush.h>
-#include <asm/dma.h>
-#include <asm/portmux.h>
-#undef DRIVER_NAME
-
-#ifdef CONFIG_SIR_BFIN_DMA
-struct dma_rx_buf {
-	char *buf;
-	int head;
-	int tail;
-};
-#endif
-
-struct bfin_sir_port {
-	unsigned char __iomem   *membase;
-	unsigned int            irq;
-	unsigned int            lsr;
-	unsigned long           clk;
-	struct net_device       *dev;
-#ifdef CONFIG_SIR_BFIN_DMA
-	int                     tx_done;
-	struct dma_rx_buf       rx_dma_buf;
-	struct timer_list       rx_dma_timer;
-	int                     rx_dma_nrows;
-#endif
-	unsigned int            tx_dma_channel;
-	unsigned int            rx_dma_channel;
-};
-
-struct bfin_sir_port_res {
-	unsigned long   base_addr;
-	int             irq;
-	unsigned int    rx_dma_channel;
-	unsigned int    tx_dma_channel;
-};
-
-struct bfin_sir_self {
-	struct bfin_sir_port    *sir_port;
-	spinlock_t              lock;
-	unsigned int            open;
-	int                     speed;
-	int                     newspeed;
-
-	struct sk_buff          *txskb;
-	struct sk_buff          *rxskb;
-	struct net_device_stats stats;
-	struct device           *dev;
-	struct irlap_cb         *irlap;
-	struct qos_info         qos;
-
-	iobuff_t                tx_buff;
-	iobuff_t                rx_buff;
-
-	struct work_struct      work;
-	int                     mtt;
-};
-
-#define DRIVER_NAME "bfin_sir"
-
-#include <asm/bfin_serial.h>
-
-static const unsigned short per[][4] = {
-	/* rx pin      tx pin     NULL  uart_number */
-	{P_UART0_RX, P_UART0_TX,    0,    0},
-	{P_UART1_RX, P_UART1_TX,    0,    1},
-	{P_UART2_RX, P_UART2_TX,    0,    2},
-	{P_UART3_RX, P_UART3_TX,    0,    3},
-};
-- 
2.7.4

Powered by blists - more mailing lists