| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <1521184106-24475-15-git-send-email-aaron.wu@analog.com>
Date: Fri, 16 Mar 2018 15:08:15 +0800
From: Aaron Wu <aaron.wu@...log.com>
To: <linux-kernel@...r.kernel.org>
CC: <aaron.wu@...log.com>
Subject: [Blackfin removal] [PATCH 17/28] usb: Remove Blackfin USB support
Signed-off-by: Aaron Wu <aaron.wu@...log.com>
Remove Blackfin USB support
---
drivers/usb/gadget/function/f_uac1_legacy.c | 2 -
drivers/usb/gadget/function/u_uac1_legacy.c | 2 -
drivers/usb/gadget/function/u_uac1_legacy.h | 2 -
drivers/usb/gadget/legacy/audio.c | 2 -
drivers/usb/host/isp1362.h | 45 --
drivers/usb/musb/Kconfig | 12 +-
drivers/usb/musb/Makefile | 1 -
drivers/usb/musb/blackfin.c | 623 ----------------------------
drivers/usb/musb/blackfin.h | 81 ----
drivers/usb/musb/musb_core.c | 7 +-
drivers/usb/musb/musb_core.h | 42 --
drivers/usb/musb/musb_debugfs.c | 2 -
drivers/usb/musb/musb_dma.h | 11 -
drivers/usb/musb/musb_gadget.c | 32 --
drivers/usb/musb/musb_regs.h | 182 --------
drivers/usb/musb/musbhsdma.c | 5 -
drivers/usb/musb/musbhsdma.h | 90 ----
drivers/usb/serial/ftdi_sio_ids.h | 8 -
include/linux/usb/musb.h | 7 -
19 files changed, 3 insertions(+), 1153 deletions(-)
delete mode 100644 drivers/usb/musb/blackfin.c
delete mode 100644 drivers/usb/musb/blackfin.h
diff --git a/drivers/usb/gadget/function/f_uac1_legacy.c b/drivers/usb/gadget/function/f_uac1_legacy.c
index 04f4b28..24c086b 100644
--- a/drivers/usb/gadget/function/f_uac1_legacy.c
+++ b/drivers/usb/gadget/function/f_uac1_legacy.c
@@ -4,8 +4,6 @@
*
* Copyright (C) 2008 Bryan Wu <cooloney@...nel.org>
* Copyright (C) 2008 Analog Devices, Inc
- *
- * Enter bugs at http://blackfin.uclinux.org/
*/
#include <linux/slab.h>
diff --git a/drivers/usb/gadget/function/u_uac1_legacy.c b/drivers/usb/gadget/function/u_uac1_legacy.c
index cbc868d..5393e5c 100644
--- a/drivers/usb/gadget/function/u_uac1_legacy.c
+++ b/drivers/usb/gadget/function/u_uac1_legacy.c
@@ -4,8 +4,6 @@
*
* Copyright (C) 2008 Bryan Wu <cooloney@...nel.org>
* Copyright (C) 2008 Analog Devices, Inc
- *
- * Enter bugs at http://blackfin.uclinux.org/
*/
#include <linux/kernel.h>
diff --git a/drivers/usb/gadget/function/u_uac1_legacy.h b/drivers/usb/gadget/function/u_uac1_legacy.h
index dd69e40..5c1bdf4 100644
--- a/drivers/usb/gadget/function/u_uac1_legacy.h
+++ b/drivers/usb/gadget/function/u_uac1_legacy.h
@@ -4,8 +4,6 @@
*
* Copyright (C) 2008 Bryan Wu <cooloney@...nel.org>
* Copyright (C) 2008 Analog Devices, Inc
- *
- * Enter bugs at http://blackfin.uclinux.org/
*/
#ifndef __U_UAC1_LEGACY_H
diff --git a/drivers/usb/gadget/legacy/audio.c b/drivers/usb/gadget/legacy/audio.c
index 7b11dce..dd81fd5 100644
--- a/drivers/usb/gadget/legacy/audio.c
+++ b/drivers/usb/gadget/legacy/audio.c
@@ -4,8 +4,6 @@
*
* Copyright (C) 2008 Bryan Wu <cooloney@...nel.org>
* Copyright (C) 2008 Analog Devices, Inc
- *
- * Enter bugs at http://blackfin.uclinux.org/
*/
/* #define VERBOSE_DEBUG */
diff --git a/drivers/usb/host/isp1362.h b/drivers/usb/host/isp1362.h
index da79e36..891402a 100644
--- a/drivers/usb/host/isp1362.h
+++ b/drivers/usb/host/isp1362.h
@@ -6,49 +6,6 @@
*/
/* ------------------------------------------------------------------------- */
-/*
- * Platform specific compile time options
- */
-#if defined(CONFIG_BLACKFIN)
-
-#include <linux/io.h>
-#define USE_32BIT 0
-#define MAX_ROOT_PORTS 2
-#define USE_PLATFORM_DELAY 0
-#define USE_NDELAY 1
-
-#define DUMMY_DELAY_ACCESS \
- do { \
- bfin_read16(ASYNC_BANK0_BASE); \
- bfin_read16(ASYNC_BANK0_BASE); \
- bfin_read16(ASYNC_BANK0_BASE); \
- } while (0)
-
-#undef insw
-#undef outsw
-
-#define insw delayed_insw
-#define outsw delayed_outsw
-
-static inline void delayed_outsw(unsigned int addr, void *buf, int len)
-{
- unsigned short *bp = (unsigned short *)buf;
- while (len--) {
- DUMMY_DELAY_ACCESS;
- outw(*bp++, addr);
- }
-}
-
-static inline void delayed_insw(unsigned int addr, void *buf, int len)
-{
- unsigned short *bp = (unsigned short *)buf;
- while (len--) {
- DUMMY_DELAY_ACCESS;
- *bp++ = inw(addr);
- }
-}
-
-#else
#define MAX_ROOT_PORTS 2
@@ -60,8 +17,6 @@ static inline void delayed_insw(unsigned int addr, void *buf, int len)
#define DUMMY_DELAY_ACCESS do {} while (0)
-#endif
-
/* ------------------------------------------------------------------------- */
diff --git a/drivers/usb/musb/Kconfig b/drivers/usb/musb/Kconfig
index 5506a9c..a424cc5 100644
--- a/drivers/usb/musb/Kconfig
+++ b/drivers/usb/musb/Kconfig
@@ -18,9 +18,6 @@ config USB_MUSB_HDRC
Texas Instruments families using this IP include DaVinci
(35x, 644x ...), OMAP 243x, OMAP 3, and TUSB 6010.
- Analog Devices parts using this IP include Blackfin BF54x,
- BF525 and BF527.
-
Allwinner SoCs using this IP include A10, A13, A20, ...
If you do not know what this is, please say N.
@@ -87,7 +84,7 @@ config USB_MUSB_DA8XX
config USB_MUSB_TUSB6010
tristate "TUSB6010"
depends on HAS_IOMEM
- depends on (ARCH_OMAP2PLUS || COMPILE_TEST) && !BLACKFIN
+ depends on (ARCH_OMAP2PLUS || COMPILE_TEST)
depends on NOP_USB_XCEIV = USB_MUSB_HDRC # both built-in or both modules
config USB_MUSB_OMAP2PLUS
@@ -107,11 +104,6 @@ config USB_MUSB_DSPS
depends on ARCH_OMAP2PLUS || COMPILE_TEST
depends on OF_IRQ
-config USB_MUSB_BLACKFIN
- tristate "Blackfin"
- depends on (BF54x && !BF544) || (BF52x && ! BF522 && !BF523)
- depends on NOP_USB_XCEIV
-
config USB_MUSB_UX500
tristate "Ux500 platforms"
depends on ARCH_U8500 || COMPILE_TEST
@@ -149,7 +141,7 @@ config USB_UX500_DMA
config USB_INVENTRA_DMA
bool 'Inventra'
- depends on USB_MUSB_OMAP2PLUS || USB_MUSB_BLACKFIN
+ depends on USB_MUSB_OMAP2PLUS
help
Enable DMA transfers using Mentor's engine.
diff --git a/drivers/usb/musb/Makefile b/drivers/usb/musb/Makefile
index 79d4d54..3a88c79 100644
--- a/drivers/usb/musb/Makefile
+++ b/drivers/usb/musb/Makefile
@@ -21,7 +21,6 @@ obj-$(CONFIG_USB_MUSB_DSPS) += musb_dsps.o
obj-$(CONFIG_USB_MUSB_TUSB6010) += tusb6010.o
obj-$(CONFIG_USB_MUSB_DAVINCI) += davinci.o
obj-$(CONFIG_USB_MUSB_DA8XX) += da8xx.o
-obj-$(CONFIG_USB_MUSB_BLACKFIN) += blackfin.o
obj-$(CONFIG_USB_MUSB_UX500) += ux500.o
obj-$(CONFIG_USB_MUSB_JZ4740) += jz4740.o
obj-$(CONFIG_USB_MUSB_SUNXI) += sunxi.o
diff --git a/drivers/usb/musb/blackfin.c b/drivers/usb/musb/blackfin.c
deleted file mode 100644
index 0a98dcd..0000000
--- a/drivers/usb/musb/blackfin.c
+++ /dev/null
@@ -1,623 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * MUSB OTG controller driver for Blackfin Processors
- *
- * Copyright 2006-2008 Analog Devices Inc.
- *
- * Enter bugs at http://blackfin.uclinux.org/
- */
-
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/sched.h>
-#include <linux/list.h>
-#include <linux/gpio.h>
-#include <linux/io.h>
-#include <linux/err.h>
-#include <linux/platform_device.h>
-#include <linux/dma-mapping.h>
-#include <linux/prefetch.h>
-#include <linux/usb/usb_phy_generic.h>
-
-#include <asm/cacheflush.h>
-
-#include "musb_core.h"
-#include "musbhsdma.h"
-#include "blackfin.h"
-
-struct bfin_glue {
- struct device *dev;
- struct platform_device *musb;
- struct platform_device *phy;
-};
-#define glue_to_musb(g) platform_get_drvdata(g->musb)
-
-static u32 bfin_fifo_offset(u8 epnum)
-{
- return USB_OFFSET(USB_EP0_FIFO) + (epnum * 8);
-}
-
-static u8 bfin_readb(const void __iomem *addr, unsigned offset)
-{
- return (u8)(bfin_read16(addr + offset));
-}
-
-static u16 bfin_readw(const void __iomem *addr, unsigned offset)
-{
- return bfin_read16(addr + offset);
-}
-
-static u32 bfin_readl(const void __iomem *addr, unsigned offset)
-{
- return (u32)(bfin_read16(addr + offset));
-}
-
-static void bfin_writeb(void __iomem *addr, unsigned offset, u8 data)
-{
- bfin_write16(addr + offset, (u16)data);
-}
-
-static void bfin_writew(void __iomem *addr, unsigned offset, u16 data)
-{
- bfin_write16(addr + offset, data);
-}
-
-static void bfin_writel(void __iomem *addr, unsigned offset, u32 data)
-{
- bfin_write16(addr + offset, (u16)data);
-}
-
-/*
- * Load an endpoint's FIFO
- */
-static void bfin_write_fifo(struct musb_hw_ep *hw_ep, u16 len, const u8 *src)
-{
- struct musb *musb = hw_ep->musb;
- void __iomem *fifo = hw_ep->fifo;
- void __iomem *epio = hw_ep->regs;
- u8 epnum = hw_ep->epnum;
-
- prefetch((u8 *)src);
-
- musb_writew(epio, MUSB_TXCOUNT, len);
-
- dev_dbg(musb->controller, "TX ep%d fifo %p count %d buf %p, epio %p\n",
- hw_ep->epnum, fifo, len, src, epio);
-
- dump_fifo_data(src, len);
-
- if (!ANOMALY_05000380 && epnum != 0) {
- u16 dma_reg;
-
- flush_dcache_range((unsigned long)src,
- (unsigned long)(src + len));
-
- /* Setup DMA address register */
- dma_reg = (u32)src;
- bfin_write16(USB_DMA_REG(epnum, USB_DMAx_ADDR_LOW), dma_reg);
- SSYNC();
-
- dma_reg = (u32)src >> 16;
- bfin_write16(USB_DMA_REG(epnum, USB_DMAx_ADDR_HIGH), dma_reg);
- SSYNC();
-
- /* Setup DMA count register */
- bfin_write16(USB_DMA_REG(epnum, USB_DMAx_COUNT_LOW), len);
- bfin_write16(USB_DMA_REG(epnum, USB_DMAx_COUNT_HIGH), 0);
- SSYNC();
-
- /* Enable the DMA */
- dma_reg = (epnum << 4) | DMA_ENA | INT_ENA | DIRECTION;
- bfin_write16(USB_DMA_REG(epnum, USB_DMAx_CTRL), dma_reg);
- SSYNC();
-
- /* Wait for complete */
- while (!(bfin_read_USB_DMA_INTERRUPT() & (1 << epnum)))
- cpu_relax();
-
- /* acknowledge dma interrupt */
- bfin_write_USB_DMA_INTERRUPT(1 << epnum);
- SSYNC();
-
- /* Reset DMA */
- bfin_write16(USB_DMA_REG(epnum, USB_DMAx_CTRL), 0);
- SSYNC();
- } else {
- SSYNC();
-
- if (unlikely((unsigned long)src & 0x01))
- outsw_8((unsigned long)fifo, src, (len + 1) >> 1);
- else
- outsw((unsigned long)fifo, src, (len + 1) >> 1);
- }
-}
-/*
- * Unload an endpoint's FIFO
- */
-static void bfin_read_fifo(struct musb_hw_ep *hw_ep, u16 len, u8 *dst)
-{
- struct musb *musb = hw_ep->musb;
- void __iomem *fifo = hw_ep->fifo;
- u8 epnum = hw_ep->epnum;
-
- if (ANOMALY_05000467 && epnum != 0) {
- u16 dma_reg;
-
- invalidate_dcache_range((unsigned long)dst,
- (unsigned long)(dst + len));
-
- /* Setup DMA address register */
- dma_reg = (u32)dst;
- bfin_write16(USB_DMA_REG(epnum, USB_DMAx_ADDR_LOW), dma_reg);
- SSYNC();
-
- dma_reg = (u32)dst >> 16;
- bfin_write16(USB_DMA_REG(epnum, USB_DMAx_ADDR_HIGH), dma_reg);
- SSYNC();
-
- /* Setup DMA count register */
- bfin_write16(USB_DMA_REG(epnum, USB_DMAx_COUNT_LOW), len);
- bfin_write16(USB_DMA_REG(epnum, USB_DMAx_COUNT_HIGH), 0);
- SSYNC();
-
- /* Enable the DMA */
- dma_reg = (epnum << 4) | DMA_ENA | INT_ENA;
- bfin_write16(USB_DMA_REG(epnum, USB_DMAx_CTRL), dma_reg);
- SSYNC();
-
- /* Wait for complete */
- while (!(bfin_read_USB_DMA_INTERRUPT() & (1 << epnum)))
- cpu_relax();
-
- /* acknowledge dma interrupt */
- bfin_write_USB_DMA_INTERRUPT(1 << epnum);
- SSYNC();
-
- /* Reset DMA */
- bfin_write16(USB_DMA_REG(epnum, USB_DMAx_CTRL), 0);
- SSYNC();
- } else {
- SSYNC();
- /* Read the last byte of packet with odd size from address fifo + 4
- * to trigger 1 byte access to EP0 FIFO.
- */
- if (len == 1)
- *dst = (u8)inw((unsigned long)fifo + 4);
- else {
- if (unlikely((unsigned long)dst & 0x01))
- insw_8((unsigned long)fifo, dst, len >> 1);
- else
- insw((unsigned long)fifo, dst, len >> 1);
-
- if (len & 0x01)
- *(dst + len - 1) = (u8)inw((unsigned long)fifo + 4);
- }
- }
- dev_dbg(musb->controller, "%cX ep%d fifo %p count %d buf %p\n",
- 'R', hw_ep->epnum, fifo, len, dst);
-
- dump_fifo_data(dst, len);
-}
-
-static irqreturn_t blackfin_interrupt(int irq, void *__hci)
-{
- unsigned long flags;
- irqreturn_t retval = IRQ_NONE;
- struct musb *musb = __hci;
-
- spin_lock_irqsave(&musb->lock, flags);
-
- musb->int_usb = musb_readb(musb->mregs, MUSB_INTRUSB);
- musb->int_tx = musb_readw(musb->mregs, MUSB_INTRTX);
- musb->int_rx = musb_readw(musb->mregs, MUSB_INTRRX);
-
- if (musb->int_usb || musb->int_tx || musb->int_rx) {
- musb_writeb(musb->mregs, MUSB_INTRUSB, musb->int_usb);
- musb_writew(musb->mregs, MUSB_INTRTX, musb->int_tx);
- musb_writew(musb->mregs, MUSB_INTRRX, musb->int_rx);
- retval = musb_interrupt(musb);
- }
-
- /* Start sampling ID pin, when plug is removed from MUSB */
- if ((musb->xceiv->otg->state == OTG_STATE_B_IDLE
- || musb->xceiv->otg->state == OTG_STATE_A_WAIT_BCON) ||
- (musb->int_usb & MUSB_INTR_DISCONNECT && is_host_active(musb))) {
- mod_timer(&musb->dev_timer, jiffies + TIMER_DELAY);
- musb->a_wait_bcon = TIMER_DELAY;
- }
-
- spin_unlock_irqrestore(&musb->lock, flags);
-
- return retval;
-}
-
-static void musb_conn_timer_handler(struct timer_list *t)
-{
- struct musb *musb = from_timer(musb, t, dev_timer);
- unsigned long flags;
- u16 val;
- static u8 toggle;
-
- spin_lock_irqsave(&musb->lock, flags);
- switch (musb->xceiv->otg->state) {
- case OTG_STATE_A_IDLE:
- case OTG_STATE_A_WAIT_BCON:
- /* Start a new session */
- val = musb_readw(musb->mregs, MUSB_DEVCTL);
- val &= ~MUSB_DEVCTL_SESSION;
- musb_writew(musb->mregs, MUSB_DEVCTL, val);
- val |= MUSB_DEVCTL_SESSION;
- musb_writew(musb->mregs, MUSB_DEVCTL, val);
- /* Check if musb is host or peripheral. */
- val = musb_readw(musb->mregs, MUSB_DEVCTL);
-
- if (!(val & MUSB_DEVCTL_BDEVICE)) {
- gpio_set_value(musb->config->gpio_vrsel, 1);
- musb->xceiv->otg->state = OTG_STATE_A_WAIT_BCON;
- } else {
- gpio_set_value(musb->config->gpio_vrsel, 0);
- /* Ignore VBUSERROR and SUSPEND IRQ */
- val = musb_readb(musb->mregs, MUSB_INTRUSBE);
- val &= ~MUSB_INTR_VBUSERROR;
- musb_writeb(musb->mregs, MUSB_INTRUSBE, val);
-
- val = MUSB_INTR_SUSPEND | MUSB_INTR_VBUSERROR;
- musb_writeb(musb->mregs, MUSB_INTRUSB, val);
- musb->xceiv->otg->state = OTG_STATE_B_IDLE;
- }
- mod_timer(&musb->dev_timer, jiffies + TIMER_DELAY);
- break;
- case OTG_STATE_B_IDLE:
- /*
- * Start a new session. It seems that MUSB needs taking
- * some time to recognize the type of the plug inserted?
- */
- val = musb_readw(musb->mregs, MUSB_DEVCTL);
- val |= MUSB_DEVCTL_SESSION;
- musb_writew(musb->mregs, MUSB_DEVCTL, val);
- val = musb_readw(musb->mregs, MUSB_DEVCTL);
-
- if (!(val & MUSB_DEVCTL_BDEVICE)) {
- gpio_set_value(musb->config->gpio_vrsel, 1);
- musb->xceiv->otg->state = OTG_STATE_A_WAIT_BCON;
- } else {
- gpio_set_value(musb->config->gpio_vrsel, 0);
-
- /* Ignore VBUSERROR and SUSPEND IRQ */
- val = musb_readb(musb->mregs, MUSB_INTRUSBE);
- val &= ~MUSB_INTR_VBUSERROR;
- musb_writeb(musb->mregs, MUSB_INTRUSBE, val);
-
- val = MUSB_INTR_SUSPEND | MUSB_INTR_VBUSERROR;
- musb_writeb(musb->mregs, MUSB_INTRUSB, val);
-
- /* Toggle the Soft Conn bit, so that we can response to
- * the inserting of either A-plug or B-plug.
- */
- if (toggle) {
- val = musb_readb(musb->mregs, MUSB_POWER);
- val &= ~MUSB_POWER_SOFTCONN;
- musb_writeb(musb->mregs, MUSB_POWER, val);
- toggle = 0;
- } else {
- val = musb_readb(musb->mregs, MUSB_POWER);
- val |= MUSB_POWER_SOFTCONN;
- musb_writeb(musb->mregs, MUSB_POWER, val);
- toggle = 1;
- }
- /* The delay time is set to 1/4 second by default,
- * shortening it, if accelerating A-plug detection
- * is needed in OTG mode.
- */
- mod_timer(&musb->dev_timer, jiffies + TIMER_DELAY / 4);
- }
- break;
- default:
- dev_dbg(musb->controller, "%s state not handled\n",
- usb_otg_state_string(musb->xceiv->otg->state));
- break;
- }
- spin_unlock_irqrestore(&musb->lock, flags);
-
- dev_dbg(musb->controller, "state is %s\n",
- usb_otg_state_string(musb->xceiv->otg->state));
-}
-
-static void bfin_musb_enable(struct musb *musb)
-{
- /* REVISIT is this really correct ? */
-}
-
-static void bfin_musb_disable(struct musb *musb)
-{
-}
-
-static void bfin_musb_set_vbus(struct musb *musb, int is_on)
-{
- int value = musb->config->gpio_vrsel_active;
- if (!is_on)
- value = !value;
- gpio_set_value(musb->config->gpio_vrsel, value);
-
- dev_dbg(musb->controller, "VBUS %s, devctl %02x "
- /* otg %3x conf %08x prcm %08x */ "\n",
- usb_otg_state_string(musb->xceiv->otg->state),
- musb_readb(musb->mregs, MUSB_DEVCTL));
-}
-
-static int bfin_musb_set_power(struct usb_phy *x, unsigned mA)
-{
- return 0;
-}
-
-static int bfin_musb_vbus_status(struct musb *musb)
-{
- return 0;
-}
-
-static int bfin_musb_set_mode(struct musb *musb, u8 musb_mode)
-{
- return -EIO;
-}
-
-static int bfin_musb_adjust_channel_params(struct dma_channel *channel,
- u16 packet_sz, u8 *mode,
- dma_addr_t *dma_addr, u32 *len)
-{
- struct musb_dma_channel *musb_channel = channel->private_data;
-
- /*
- * Anomaly 05000450 might cause data corruption when using DMA
- * MODE 1 transmits with short packet. So to work around this,
- * we truncate all MODE 1 transfers down to a multiple of the
- * max packet size, and then do the last short packet transfer
- * (if there is any) using MODE 0.
- */
- if (ANOMALY_05000450) {
- if (musb_channel->transmit && *mode == 1)
- *len = *len - (*len % packet_sz);
- }
-
- return 0;
-}
-
-static void bfin_musb_reg_init(struct musb *musb)
-{
- if (ANOMALY_05000346) {
- bfin_write_USB_APHY_CALIB(ANOMALY_05000346_value);
- SSYNC();
- }
-
- if (ANOMALY_05000347) {
- bfin_write_USB_APHY_CNTRL(0x0);
- SSYNC();
- }
-
- /* Configure PLL oscillator register */
- bfin_write_USB_PLLOSC_CTRL(0x3080 |
- ((480/musb->config->clkin) << 1));
- SSYNC();
-
- bfin_write_USB_SRP_CLKDIV((get_sclk()/1000) / 32 - 1);
- SSYNC();
-
- bfin_write_USB_EP_NI0_RXMAXP(64);
- SSYNC();
-
- bfin_write_USB_EP_NI0_TXMAXP(64);
- SSYNC();
-
- /* Route INTRUSB/INTR_RX/INTR_TX to USB_INT0*/
- bfin_write_USB_GLOBINTR(0x7);
- SSYNC();
-
- bfin_write_USB_GLOBAL_CTL(GLOBAL_ENA | EP1_TX_ENA | EP2_TX_ENA |
- EP3_TX_ENA | EP4_TX_ENA | EP5_TX_ENA |
- EP6_TX_ENA | EP7_TX_ENA | EP1_RX_ENA |
- EP2_RX_ENA | EP3_RX_ENA | EP4_RX_ENA |
- EP5_RX_ENA | EP6_RX_ENA | EP7_RX_ENA);
- SSYNC();
-}
-
-static int bfin_musb_init(struct musb *musb)
-{
-
- /*
- * Rev 1.0 BF549 EZ-KITs require PE7 to be high for both DEVICE
- * and OTG HOST modes, while rev 1.1 and greater require PE7 to
- * be low for DEVICE mode and high for HOST mode. We set it high
- * here because we are in host mode
- */
-
- if (gpio_request(musb->config->gpio_vrsel, "USB_VRSEL")) {
- printk(KERN_ERR "Failed ro request USB_VRSEL GPIO_%d\n",
- musb->config->gpio_vrsel);
- return -ENODEV;
- }
- gpio_direction_output(musb->config->gpio_vrsel, 0);
-
- musb->xceiv = usb_get_phy(USB_PHY_TYPE_USB2);
- if (IS_ERR_OR_NULL(musb->xceiv)) {
- gpio_free(musb->config->gpio_vrsel);
- return -EPROBE_DEFER;
- }
-
- bfin_musb_reg_init(musb);
-
- timer_setup(&musb->dev_timer, musb_conn_timer_handler, 0);
-
- musb->xceiv->set_power = bfin_musb_set_power;
-
- musb->isr = blackfin_interrupt;
- musb->double_buffer_not_ok = true;
-
- return 0;
-}
-
-static int bfin_musb_exit(struct musb *musb)
-{
- gpio_free(musb->config->gpio_vrsel);
- usb_put_phy(musb->xceiv);
-
- return 0;
-}
-
-static const struct musb_platform_ops bfin_ops = {
- .quirks = MUSB_DMA_INVENTRA,
- .init = bfin_musb_init,
- .exit = bfin_musb_exit,
-
- .fifo_offset = bfin_fifo_offset,
- .readb = bfin_readb,
- .writeb = bfin_writeb,
- .readw = bfin_readw,
- .writew = bfin_writew,
- .readl = bfin_readl,
- .writel = bfin_writel,
- .fifo_mode = 2,
- .read_fifo = bfin_read_fifo,
- .write_fifo = bfin_write_fifo,
-#ifdef CONFIG_USB_INVENTRA_DMA
- .dma_init = musbhs_dma_controller_create,
- .dma_exit = musbhs_dma_controller_destroy,
-#endif
- .enable = bfin_musb_enable,
- .disable = bfin_musb_disable,
-
- .set_mode = bfin_musb_set_mode,
-
- .vbus_status = bfin_musb_vbus_status,
- .set_vbus = bfin_musb_set_vbus,
-
- .adjust_channel_params = bfin_musb_adjust_channel_params,
-};
-
-static u64 bfin_dmamask = DMA_BIT_MASK(32);
-
-static int bfin_probe(struct platform_device *pdev)
-{
- struct resource musb_resources[2];
- struct musb_hdrc_platform_data *pdata = dev_get_platdata(&pdev->dev);
- struct platform_device *musb;
- struct bfin_glue *glue;
-
- int ret = -ENOMEM;
-
- glue = devm_kzalloc(&pdev->dev, sizeof(*glue), GFP_KERNEL);
- if (!glue)
- goto err0;
-
- musb = platform_device_alloc("musb-hdrc", PLATFORM_DEVID_AUTO);
- if (!musb)
- goto err0;
-
- musb->dev.parent = &pdev->dev;
- musb->dev.dma_mask = &bfin_dmamask;
- musb->dev.coherent_dma_mask = bfin_dmamask;
-
- glue->dev = &pdev->dev;
- glue->musb = musb;
-
- pdata->platform_ops = &bfin_ops;
-
- glue->phy = usb_phy_generic_register();
- if (IS_ERR(glue->phy))
- goto err1;
- platform_set_drvdata(pdev, glue);
-
- memset(musb_resources, 0x00, sizeof(*musb_resources) *
- ARRAY_SIZE(musb_resources));
-
- musb_resources[0].name = pdev->resource[0].name;
- musb_resources[0].start = pdev->resource[0].start;
- musb_resources[0].end = pdev->resource[0].end;
- musb_resources[0].flags = pdev->resource[0].flags;
-
- musb_resources[1].name = pdev->resource[1].name;
- musb_resources[1].start = pdev->resource[1].start;
- musb_resources[1].end = pdev->resource[1].end;
- musb_resources[1].flags = pdev->resource[1].flags;
-
- ret = platform_device_add_resources(musb, musb_resources,
- ARRAY_SIZE(musb_resources));
- if (ret) {
- dev_err(&pdev->dev, "failed to add resources\n");
- goto err2;
- }
-
- ret = platform_device_add_data(musb, pdata, sizeof(*pdata));
- if (ret) {
- dev_err(&pdev->dev, "failed to add platform_data\n");
- goto err2;
- }
-
- ret = platform_device_add(musb);
- if (ret) {
- dev_err(&pdev->dev, "failed to register musb device\n");
- goto err2;
- }
-
- return 0;
-
-err2:
- usb_phy_generic_unregister(glue->phy);
-
-err1:
- platform_device_put(musb);
-
-err0:
- return ret;
-}
-
-static int bfin_remove(struct platform_device *pdev)
-{
- struct bfin_glue *glue = platform_get_drvdata(pdev);
-
- platform_device_unregister(glue->musb);
- usb_phy_generic_unregister(glue->phy);
-
- return 0;
-}
-
-static int __maybe_unused bfin_suspend(struct device *dev)
-{
- struct bfin_glue *glue = dev_get_drvdata(dev);
- struct musb *musb = glue_to_musb(glue);
-
- if (is_host_active(musb))
- /*
- * During hibernate gpio_vrsel will change from high to low
- * low which will generate wakeup event resume the system
- * immediately. Set it to 0 before hibernate to avoid this
- * wakeup event.
- */
- gpio_set_value(musb->config->gpio_vrsel, 0);
-
- return 0;
-}
-
-static int __maybe_unused bfin_resume(struct device *dev)
-{
- struct bfin_glue *glue = dev_get_drvdata(dev);
- struct musb *musb = glue_to_musb(glue);
-
- bfin_musb_reg_init(musb);
-
- return 0;
-}
-
-static SIMPLE_DEV_PM_OPS(bfin_pm_ops, bfin_suspend, bfin_resume);
-
-static struct platform_driver bfin_driver = {
- .probe = bfin_probe,
- .remove = bfin_remove,
- .driver = {
- .name = "musb-blackfin",
- .pm = &bfin_pm_ops,
- },
-};
-
-MODULE_DESCRIPTION("Blackfin MUSB Glue Layer");
-MODULE_AUTHOR("Bryan Wy <cooloney@...nel.org>");
-MODULE_LICENSE("GPL v2");
-module_platform_driver(bfin_driver);
diff --git a/drivers/usb/musb/blackfin.h b/drivers/usb/musb/blackfin.h
deleted file mode 100644
index 5b14991..0000000
--- a/drivers/usb/musb/blackfin.h
+++ /dev/null
@@ -1,81 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Copyright (C) 2007 by Analog Devices, Inc.
- */
-
-#ifndef __MUSB_BLACKFIN_H__
-#define __MUSB_BLACKFIN_H__
-
-/*
- * Blackfin specific definitions
- */
-
-/* Anomalies notes:
- *
- * 05000450 - USB DMA Mode 1 Short Packet Data Corruption:
- * MUSB driver is designed to transfer buffer of N * maxpacket size
- * in DMA mode 1 and leave the rest of the data to the next
- * transfer in DMA mode 0, so we never transmit a short packet in
- * DMA mode 1.
- *
- * 05000463 - This anomaly doesn't affect this driver since it
- * never uses L1 or L2 memory as data destination.
- *
- * 05000464 - This anomaly doesn't affect this driver since it
- * never uses L1 or L2 memory as data source.
- *
- * 05000465 - The anomaly can be seen when SCLK is over 100 MHz, and there is
- * no way to workaround for bulk endpoints. Since the wMaxPackSize
- * of bulk is less than or equal to 512, while the fifo size of
- * endpoint 5, 6, 7 is 1024, the double buffer mode is enabled
- * automatically when these endpoints are used for bulk OUT.
- *
- * 05000466 - This anomaly doesn't affect this driver since it never mixes
- * concurrent DMA and core accesses to the TX endpoint FIFOs.
- *
- * 05000467 - The workaround for this anomaly will introduce another
- * anomaly - 05000465.
- */
-
-/* The Mentor USB DMA engine on BF52x (silicon v0.0 and v0.1) seems to be
- * unstable in host mode. This may be caused by Anomaly 05000380. After
- * digging out the root cause, we will change this number accordingly.
- * So, need to either use silicon v0.2+ or disable DMA mode in MUSB.
- */
-#if ANOMALY_05000380 && defined(CONFIG_BF52x) && \
- !defined(CONFIG_MUSB_PIO_ONLY)
-# error "Please use PIO mode in MUSB driver on bf52x chip v0.0 and v0.1"
-#endif
-
-#undef DUMP_FIFO_DATA
-#ifdef DUMP_FIFO_DATA
-static void dump_fifo_data(u8 *buf, u16 len)
-{
- u8 *tmp = buf;
- int i;
-
- for (i = 0; i < len; i++) {
- if (!(i % 16) && i)
- pr_debug("\n");
- pr_debug("%02x ", *tmp++);
- }
- pr_debug("\n");
-}
-#else
-#define dump_fifo_data(buf, len) do {} while (0)
-#endif
-
-
-#define USB_DMA_BASE USB_DMA_INTERRUPT
-#define USB_DMAx_CTRL 0x04
-#define USB_DMAx_ADDR_LOW 0x08
-#define USB_DMAx_ADDR_HIGH 0x0C
-#define USB_DMAx_COUNT_LOW 0x10
-#define USB_DMAx_COUNT_HIGH 0x14
-
-#define USB_DMA_REG(ep, reg) (USB_DMA_BASE + 0x20 * ep + reg)
-
-/* Almost 1 second */
-#define TIMER_DELAY (1 * HZ)
-
-#endif /* __MUSB_BLACKFIN_H__ */
diff --git a/drivers/usb/musb/musb_core.c b/drivers/usb/musb/musb_core.c
index eef4ad5..1348658 100644
--- a/drivers/usb/musb/musb_core.c
+++ b/drivers/usb/musb/musb_core.c
@@ -126,7 +126,6 @@ EXPORT_SYMBOL_GPL(musb_get_mode);
/*-------------------------------------------------------------------------*/
-#ifndef CONFIG_BLACKFIN
static int musb_ulpi_read(struct usb_phy *phy, u32 reg)
{
void __iomem *addr = phy->io_priv;
@@ -208,10 +207,6 @@ static int musb_ulpi_write(struct usb_phy *phy, u32 val, u32 reg)
return ret;
}
-#else
-#define musb_ulpi_read NULL
-#define musb_ulpi_write NULL
-#endif
static struct usb_phy_io_ops musb_ulpi_access = {
.read = musb_ulpi_read,
@@ -2171,7 +2166,7 @@ musb_init_controller(struct device *dev, int nIrq, void __iomem *ctrl)
* - initializes musb->xceiv, usually by otg_get_phy()
* - stops powering VBUS
*
- * There are various transceiver configurations. Blackfin,
+ * There are various transceiver configurations.
* DaVinci, TUSB60x0, and others integrate them. OMAP3 uses
* external/discrete ones in various flavors (twl4030 family,
* isp1504, non-OTG, etc) mostly hooking up through ULPI.
diff --git a/drivers/usb/musb/musb_core.h b/drivers/usb/musb/musb_core.h
index 385841e..d91bb28 100644
--- a/drivers/usb/musb/musb_core.h
+++ b/drivers/usb/musb/musb_core.h
@@ -414,19 +414,6 @@ struct musb {
struct usb_gadget_driver *gadget_driver; /* its driver */
struct usb_hcd *hcd; /* the usb hcd */
- /*
- * FIXME: Remove this flag.
- *
- * This is only added to allow Blackfin to work
- * with current driver. For some unknown reason
- * Blackfin doesn't work with double buffering
- * and that's enabled by default.
- *
- * We added this flag to forcefully disable double
- * buffering until we get it working.
- */
- unsigned double_buffer_not_ok:1;
-
const struct musb_hdrc_config *config;
int xceiv_old_state;
@@ -467,34 +454,6 @@ static inline char *musb_ep_xfertype_string(u8 type)
return s;
}
-#ifdef CONFIG_BLACKFIN
-static inline int musb_read_fifosize(struct musb *musb,
- struct musb_hw_ep *hw_ep, u8 epnum)
-{
- musb->nr_endpoints++;
- musb->epmask |= (1 << epnum);
-
- if (epnum < 5) {
- hw_ep->max_packet_sz_tx = 128;
- hw_ep->max_packet_sz_rx = 128;
- } else {
- hw_ep->max_packet_sz_tx = 1024;
- hw_ep->max_packet_sz_rx = 1024;
- }
- hw_ep->is_shared_fifo = false;
-
- return 0;
-}
-
-static inline void musb_configure_ep0(struct musb *musb)
-{
- musb->endpoints[0].max_packet_sz_tx = MUSB_EP0_FIFOSIZE;
- musb->endpoints[0].max_packet_sz_rx = MUSB_EP0_FIFOSIZE;
- musb->endpoints[0].is_shared_fifo = true;
-}
-
-#else
-
static inline int musb_read_fifosize(struct musb *musb,
struct musb_hw_ep *hw_ep, u8 epnum)
{
@@ -531,7 +490,6 @@ static inline void musb_configure_ep0(struct musb *musb)
musb->endpoints[0].max_packet_sz_rx = MUSB_EP0_FIFOSIZE;
musb->endpoints[0].is_shared_fifo = true;
}
-#endif /* CONFIG_BLACKFIN */
/***************************** Glue it together *****************************/
diff --git a/drivers/usb/musb/musb_debugfs.c b/drivers/usb/musb/musb_debugfs.c
index 7cf5a1b..7dac456 100644
--- a/drivers/usb/musb/musb_debugfs.c
+++ b/drivers/usb/musb/musb_debugfs.c
@@ -70,7 +70,6 @@ static const struct musb_register_map musb_regmap[] = {
{ "DMA_CNTLch7", 0x274, 16 },
{ "DMA_ADDRch7", 0x278, 32 },
{ "DMA_COUNTch7", 0x27C, 32 },
-#ifndef CONFIG_BLACKFIN
{ "ConfigData", MUSB_CONFIGDATA,8 },
{ "BabbleCtl", MUSB_BABBLE_CTL,8 },
{ "TxFIFOsz", MUSB_TXFIFOSZ, 8 },
@@ -79,7 +78,6 @@ static const struct musb_register_map musb_regmap[] = {
{ "RxFIFOadd", MUSB_RXFIFOADD, 16 },
{ "EPInfo", MUSB_EPINFO, 8 },
{ "RAMInfo", MUSB_RAMINFO, 8 },
-#endif
{ } /* Terminating Entry */
};
diff --git a/drivers/usb/musb/musb_dma.h b/drivers/usb/musb/musb_dma.h
index a4241f4..0fc8cd0 100644
--- a/drivers/usb/musb/musb_dma.h
+++ b/drivers/usb/musb/musb_dma.h
@@ -80,17 +80,6 @@ struct musb_hw_ep;
#define is_cppi_enabled(musb) 0
#endif
-/* Anomaly 05000456 - USB Receive Interrupt Is Not Generated in DMA Mode 1
- * Only allow DMA mode 1 to be used when the USB will actually generate the
- * interrupts we expect.
- */
-#ifdef CONFIG_BLACKFIN
-# undef USE_MODE1
-# if !ANOMALY_05000456
-# define USE_MODE1
-# endif
-#endif
-
/*
* DMA channel status ... updated by the dma controller driver whenever that
* status changes, and protected by the overall controller spinlock.
diff --git a/drivers/usb/musb/musb_gadget.c b/drivers/usb/musb/musb_gadget.c
index 293e5b8..1e40a81 100644
--- a/drivers/usb/musb/musb_gadget.c
+++ b/drivers/usb/musb/musb_gadget.c
@@ -1680,39 +1680,7 @@ static int musb_gadget_pullup(struct usb_gadget *gadget, int is_on)
return 0;
}
-#ifdef CONFIG_BLACKFIN
-static struct usb_ep *musb_match_ep(struct usb_gadget *g,
- struct usb_endpoint_descriptor *desc,
- struct usb_ss_ep_comp_descriptor *ep_comp)
-{
- struct usb_ep *ep = NULL;
-
- switch (usb_endpoint_type(desc)) {
- case USB_ENDPOINT_XFER_ISOC:
- case USB_ENDPOINT_XFER_BULK:
- if (usb_endpoint_dir_in(desc))
- ep = gadget_find_ep_by_name(g, "ep5in");
- else
- ep = gadget_find_ep_by_name(g, "ep6out");
- break;
- case USB_ENDPOINT_XFER_INT:
- if (usb_endpoint_dir_in(desc))
- ep = gadget_find_ep_by_name(g, "ep1in");
- else
- ep = gadget_find_ep_by_name(g, "ep2out");
- break;
- default:
- break;
- }
-
- if (ep && usb_gadget_ep_match_desc(g, ep, desc, ep_comp))
- return ep;
-
- return NULL;
-}
-#else
#define musb_match_ep NULL
-#endif
static int musb_gadget_start(struct usb_gadget *g,
struct usb_gadget_driver *driver);
diff --git a/drivers/usb/musb/musb_regs.h b/drivers/usb/musb/musb_regs.h
index a4beba1..8846662 100644
--- a/drivers/usb/musb/musb_regs.h
+++ b/drivers/usb/musb/musb_regs.h
@@ -195,8 +195,6 @@
#define MUSB_HUBADDR_MULTI_TT 0x80
-#ifndef CONFIG_BLACKFIN
-
/*
* Common USB registers
*/
@@ -416,184 +414,4 @@ static inline u8 musb_read_txhubport(struct musb *musb, u8 epnum)
musb->io.busctl_offset(epnum, MUSB_TXHUBPORT));
}
-#else /* CONFIG_BLACKFIN */
-
-#define USB_BASE USB_FADDR
-#define USB_OFFSET(reg) (reg - USB_BASE)
-
-/*
- * Common USB registers
- */
-#define MUSB_FADDR USB_OFFSET(USB_FADDR) /* 8-bit */
-#define MUSB_POWER USB_OFFSET(USB_POWER) /* 8-bit */
-#define MUSB_INTRTX USB_OFFSET(USB_INTRTX) /* 16-bit */
-#define MUSB_INTRRX USB_OFFSET(USB_INTRRX)
-#define MUSB_INTRTXE USB_OFFSET(USB_INTRTXE)
-#define MUSB_INTRRXE USB_OFFSET(USB_INTRRXE)
-#define MUSB_INTRUSB USB_OFFSET(USB_INTRUSB) /* 8 bit */
-#define MUSB_INTRUSBE USB_OFFSET(USB_INTRUSBE)/* 8 bit */
-#define MUSB_FRAME USB_OFFSET(USB_FRAME)
-#define MUSB_INDEX USB_OFFSET(USB_INDEX) /* 8 bit */
-#define MUSB_TESTMODE USB_OFFSET(USB_TESTMODE)/* 8 bit */
-
-/*
- * Additional Control Registers
- */
-
-#define MUSB_DEVCTL USB_OFFSET(USB_OTG_DEV_CTL) /* 8 bit */
-
-#define MUSB_LINKINFO USB_OFFSET(USB_LINKINFO)/* 8 bit */
-#define MUSB_VPLEN USB_OFFSET(USB_VPLEN) /* 8 bit */
-#define MUSB_HS_EOF1 USB_OFFSET(USB_HS_EOF1) /* 8 bit */
-#define MUSB_FS_EOF1 USB_OFFSET(USB_FS_EOF1) /* 8 bit */
-#define MUSB_LS_EOF1 USB_OFFSET(USB_LS_EOF1) /* 8 bit */
-
-/* Offsets to endpoint registers */
-#define MUSB_TXMAXP 0x00
-#define MUSB_TXCSR 0x04
-#define MUSB_CSR0 MUSB_TXCSR /* Re-used for EP0 */
-#define MUSB_RXMAXP 0x08
-#define MUSB_RXCSR 0x0C
-#define MUSB_RXCOUNT 0x10
-#define MUSB_COUNT0 MUSB_RXCOUNT /* Re-used for EP0 */
-#define MUSB_TXTYPE 0x14
-#define MUSB_TYPE0 MUSB_TXTYPE /* Re-used for EP0 */
-#define MUSB_TXINTERVAL 0x18
-#define MUSB_NAKLIMIT0 MUSB_TXINTERVAL /* Re-used for EP0 */
-#define MUSB_RXTYPE 0x1C
-#define MUSB_RXINTERVAL 0x20
-#define MUSB_TXCOUNT 0x28
-
-/* Offsets to endpoint registers in indexed model (using INDEX register) */
-#define MUSB_INDEXED_OFFSET(_epnum, _offset) \
- (0x40 + (_offset))
-
-/* Offsets to endpoint registers in flat models */
-#define MUSB_FLAT_OFFSET(_epnum, _offset) \
- (USB_OFFSET(USB_EP_NI0_TXMAXP) + (0x40 * (_epnum)) + (_offset))
-
-/* Not implemented - HW has separate Tx/Rx FIFO */
-#define MUSB_TXCSR_MODE 0x0000
-
-static inline void musb_write_txfifosz(void __iomem *mbase, u8 c_size)
-{
-}
-
-static inline void musb_write_txfifoadd(void __iomem *mbase, u16 c_off)
-{
-}
-
-static inline void musb_write_rxfifosz(void __iomem *mbase, u8 c_size)
-{
-}
-
-static inline void musb_write_rxfifoadd(void __iomem *mbase, u16 c_off)
-{
-}
-
-static inline void musb_write_ulpi_buscontrol(void __iomem *mbase, u8 val)
-{
-}
-
-static inline u8 musb_read_txfifosz(void __iomem *mbase)
-{
- return 0;
-}
-
-static inline u16 musb_read_txfifoadd(void __iomem *mbase)
-{
- return 0;
-}
-
-static inline u8 musb_read_rxfifosz(void __iomem *mbase)
-{
- return 0;
-}
-
-static inline u16 musb_read_rxfifoadd(void __iomem *mbase)
-{
- return 0;
-}
-
-static inline u8 musb_read_ulpi_buscontrol(void __iomem *mbase)
-{
- return 0;
-}
-
-static inline u8 musb_read_configdata(void __iomem *mbase)
-{
- return 0;
-}
-
-static inline u16 musb_read_hwvers(void __iomem *mbase)
-{
- /*
- * This register is invisible on Blackfin, actually the MUSB
- * RTL version of Blackfin is 1.9, so just hardcode its value.
- */
- return MUSB_HWVERS_1900;
-}
-
-static inline void musb_write_rxfunaddr(void __iomem *mbase, u8 epnum,
- u8 qh_addr_req)
-{
-}
-
-static inline void musb_write_rxhubaddr(void __iomem *mbase, u8 epnum,
- u8 qh_h_addr_reg)
-{
-}
-
-static inline void musb_write_rxhubport(void __iomem *mbase, u8 epnum,
- u8 qh_h_port_reg)
-{
-}
-
-static inline void musb_write_txfunaddr(void __iomem *mbase, u8 epnum,
- u8 qh_addr_reg)
-{
-}
-
-static inline void musb_write_txhubaddr(void __iomem *mbase, u8 epnum,
- u8 qh_addr_reg)
-{
-}
-
-static inline void musb_write_txhubport(void __iomem *mbase, u8 epnum,
- u8 qh_h_port_reg)
-{
-}
-
-static inline u8 musb_read_rxfunaddr(void __iomem *mbase, u8 epnum)
-{
- return 0;
-}
-
-static inline u8 musb_read_rxhubaddr(void __iomem *mbase, u8 epnum)
-{
- return 0;
-}
-
-static inline u8 musb_read_rxhubport(void __iomem *mbase, u8 epnum)
-{
- return 0;
-}
-
-static inline u8 musb_read_txfunaddr(void __iomem *mbase, u8 epnum)
-{
- return 0;
-}
-
-static inline u8 musb_read_txhubaddr(void __iomem *mbase, u8 epnum)
-{
- return 0;
-}
-
-static inline u8 musb_read_txhubport(void __iomem *mbase, u8 epnum)
-{
- return 0;
-}
-
-#endif /* CONFIG_BLACKFIN */
-
#endif /* __MUSB_REGS_H__ */
diff --git a/drivers/usb/musb/musbhsdma.c b/drivers/usb/musb/musbhsdma.c
index 21fb9e6..4389fc3 100644
--- a/drivers/usb/musb/musbhsdma.c
+++ b/drivers/usb/musb/musbhsdma.c
@@ -235,11 +235,6 @@ static irqreturn_t dma_controller_irq(int irq, void *private_data)
int_hsdma = musb_readb(mbase, MUSB_HSDMA_INTR);
-#ifdef CONFIG_BLACKFIN
- /* Clear DMA interrupt flags */
- musb_writeb(mbase, MUSB_HSDMA_INTR, int_hsdma);
-#endif
-
if (!int_hsdma) {
musb_dbg(musb, "spurious DMA irq");
diff --git a/drivers/usb/musb/musbhsdma.h b/drivers/usb/musb/musbhsdma.h
index 44f7983..51bc12f 100644
--- a/drivers/usb/musb/musbhsdma.h
+++ b/drivers/usb/musb/musbhsdma.h
@@ -6,8 +6,6 @@
* Copyright (C) 2005-2007 by Texas Instruments
*/
-#ifndef CONFIG_BLACKFIN
-
#define MUSB_HSDMA_BASE 0x200
#define MUSB_HSDMA_INTR (MUSB_HSDMA_BASE + 0)
#define MUSB_HSDMA_CONTROL 0x4
@@ -34,68 +32,6 @@
musb_writel(mbase, \
MUSB_HSDMA_CHANNEL_OFFSET(bchannel, MUSB_HSDMA_COUNT), \
len)
-#else
-
-#define MUSB_HSDMA_BASE 0x400
-#define MUSB_HSDMA_INTR (MUSB_HSDMA_BASE + 0)
-#define MUSB_HSDMA_CONTROL 0x04
-#define MUSB_HSDMA_ADDR_LOW 0x08
-#define MUSB_HSDMA_ADDR_HIGH 0x0C
-#define MUSB_HSDMA_COUNT_LOW 0x10
-#define MUSB_HSDMA_COUNT_HIGH 0x14
-
-#define MUSB_HSDMA_CHANNEL_OFFSET(_bchannel, _offset) \
- (MUSB_HSDMA_BASE + (_bchannel * 0x20) + _offset)
-
-static inline u32 musb_read_hsdma_addr(void __iomem *mbase, u8 bchannel)
-{
- u32 addr = musb_readw(mbase,
- MUSB_HSDMA_CHANNEL_OFFSET(bchannel, MUSB_HSDMA_ADDR_HIGH));
-
- addr = addr << 16;
-
- addr |= musb_readw(mbase,
- MUSB_HSDMA_CHANNEL_OFFSET(bchannel, MUSB_HSDMA_ADDR_LOW));
-
- return addr;
-}
-
-static inline void musb_write_hsdma_addr(void __iomem *mbase,
- u8 bchannel, dma_addr_t dma_addr)
-{
- musb_writew(mbase,
- MUSB_HSDMA_CHANNEL_OFFSET(bchannel, MUSB_HSDMA_ADDR_LOW),
- dma_addr);
- musb_writew(mbase,
- MUSB_HSDMA_CHANNEL_OFFSET(bchannel, MUSB_HSDMA_ADDR_HIGH),
- (dma_addr >> 16));
-}
-
-static inline u32 musb_read_hsdma_count(void __iomem *mbase, u8 bchannel)
-{
- u32 count = musb_readw(mbase,
- MUSB_HSDMA_CHANNEL_OFFSET(bchannel, MUSB_HSDMA_COUNT_HIGH));
-
- count = count << 16;
-
- count |= musb_readw(mbase,
- MUSB_HSDMA_CHANNEL_OFFSET(bchannel, MUSB_HSDMA_COUNT_LOW));
-
- return count;
-}
-
-static inline void musb_write_hsdma_count(void __iomem *mbase,
- u8 bchannel, u32 len)
-{
- musb_writew(mbase,
- MUSB_HSDMA_CHANNEL_OFFSET(bchannel, MUSB_HSDMA_COUNT_LOW),len);
- musb_writew(mbase,
- MUSB_HSDMA_CHANNEL_OFFSET(bchannel, MUSB_HSDMA_COUNT_HIGH),
- (len >> 16));
-}
-
-#endif /* CONFIG_BLACKFIN */
-
/* control register (16-bit): */
#define MUSB_HSDMA_ENABLE_SHIFT 0
#define MUSB_HSDMA_TRANSMIT_SHIFT 1
diff --git a/include/linux/usb/musb.h b/include/linux/usb/musb.h
index 5d19e67..9eb908a 100644
--- a/include/linux/usb/musb.h
+++ b/include/linux/usb/musb.h
@@ -89,13 +89,6 @@ struct musb_hdrc_config {
u8 ram_bits; /* ram address size */
struct musb_hdrc_eps_bits *eps_bits __deprecated;
-#ifdef CONFIG_BLACKFIN
- /* A GPIO controlling VRSEL in Blackfin */
- unsigned int gpio_vrsel;
- unsigned int gpio_vrsel_active;
- /* musb CLKIN in Blackfin in MHZ */
- unsigned char clkin;
-#endif
u32 maximum_speed;
};
--
2.7.4
Powered by blists - more mailing lists