[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <CAMuHMdWXb+eSTG28eKRzfP3mq=KLXikOt94MGNaS+MYeiVdr3w@mail.gmail.com>
Date: Mon, 26 Mar 2018 13:35:53 +0200
From: Geert Uytterhoeven <geert@...ux-m68k.org>
To: Boris Brezillon <boris.brezillon@...tlin.com>
Cc: Wolfram Sang <wsa@...-dreams.de>,
Linux I2C <linux-i2c@...r.kernel.org>,
Jonathan Corbet <corbet@....net>, linux-doc@...r.kernel.org,
Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
Arnd Bergmann <arnd@...db.de>,
Przemyslaw Sroka <psroka@...ence.com>,
Arkadiusz Golec <agolec@...ence.com>,
Alan Douglas <adouglas@...ence.com>,
Bartosz Folta <bfolta@...ence.com>,
Damian Kos <dkos@...ence.com>,
Alicja Jurasik-Urbaniak <alicja@...ence.com>,
Cyprian Wronka <cwronka@...ence.com>,
Suresh Punnoose <sureshp@...ence.com>,
Rafal Ciepiela <rafalc@...ence.com>,
Thomas Petazzoni <thomas.petazzoni@...e-electrons.com>,
Nishanth Menon <nm@...com>, Rob Herring <robh+dt@...nel.org>,
Pawel Moll <pawel.moll@....com>,
Mark Rutland <mark.rutland@....com>,
Ian Campbell <ijc+devicetree@...lion.org.uk>,
Kumar Gala <galak@...eaurora.org>,
"open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS"
<devicetree@...r.kernel.org>,
Linux Kernel Mailing List <linux-kernel@...r.kernel.org>,
Vitor Soares <Vitor.Soares@...opsys.com>,
Linus Walleij <linus.walleij@...aro.org>,
Xiang Lin <Xiang.Lin@...aptics.com>,
"open list:GPIO SUBSYSTEM" <linux-gpio@...r.kernel.org>
Subject: Re: [PATCH v3 11/11] dt-bindings: gpio: Add bindings for Cadence I3C
gpio expander
Hi Boris,
On Mon, Mar 26, 2018 at 1:25 PM, Boris Brezillon
<boris.brezillon@...tlin.com> wrote:
> On Mon, 26 Mar 2018 12:12:54 +0200
> Geert Uytterhoeven <geert@...ux-m68k.org> wrote:
>> On Fri, Mar 23, 2018 at 12:00 PM, Boris Brezillon
>> <boris.brezillon@...tlin.com> wrote:
>> > Document the Cadence I3C gpio expander bindings.
>> >
>> > Signed-off-by: Boris Brezillon <boris.brezillon@...tlin.com>
>>
>> Thanks for your patch!
>>
>> > --- /dev/null
>> > +++ b/Documentation/devicetree/bindings/gpio/gpio-cdns-i3c.txt
>>
>> > +- #interrupt-cells : Should be 2. The first cell is the GPIO number.
>> > + The second cell bits[3:0] is used to specify trigger type and level flags:
>> > + 1 = low-to-high edge triggered.
>> > + 2 = high-to-low edge triggered.
>> > + 3 = triggered on both edges.
>> > + 4 = active high level-sensitive.
>> > + 8 = active low level-sensitive.
>>
>> These are identical to the values in <dt-bindings/interrupt-controller/irq.h>.
>> Perhaps you can refer to those definitions?
>
> Well, I'm not sure this is allowed since DT bindings docs are
> supposed to be OS-agnostic and macros defined in
> <dt-bindings/interrupt-controller/irq.h> are, AFAIK, only available to
> Linux.
If they're under include/dt-bindings/, they're part of the DT bindings.
Gr{oetje,eeting}s,
Geert
--
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@...ux-m68k.org
In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
-- Linus Torvalds
Powered by blists - more mailing lists