linux-kernel - Re: [PATCH v3 11/11] dt-bindings: gpio: Add bindings for Cadence I3C gpio expander

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite for Android: free password hash cracker in your pocket

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <20180326222501.exvvdjb6fbrtsvkv@rob-hp-laptop>
Date:   Mon, 26 Mar 2018 17:25:01 -0500
From:   Rob Herring <robh@...nel.org>
To:     Boris Brezillon <boris.brezillon@...tlin.com>
Cc:     Wolfram Sang <wsa@...-dreams.de>, linux-i2c@...r.kernel.org,
        Jonathan Corbet <corbet@....net>, linux-doc@...r.kernel.org,
        Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
        Arnd Bergmann <arnd@...db.de>,
        Przemyslaw Sroka <psroka@...ence.com>,
        Arkadiusz Golec <agolec@...ence.com>,
        Alan Douglas <adouglas@...ence.com>,
        Bartosz Folta <bfolta@...ence.com>,
        Damian Kos <dkos@...ence.com>,
        Alicja Jurasik-Urbaniak <alicja@...ence.com>,
        Cyprian Wronka <cwronka@...ence.com>,
        Suresh Punnoose <sureshp@...ence.com>,
        Rafal Ciepiela <rafalc@...ence.com>,
        Thomas Petazzoni <thomas.petazzoni@...e-electrons.com>,
        Nishanth Menon <nm@...com>, Pawel Moll <pawel.moll@....com>,
        Mark Rutland <mark.rutland@....com>,
        Ian Campbell <ijc+devicetree@...lion.org.uk>,
        Kumar Gala <galak@...eaurora.org>, devicetree@...r.kernel.org,
        linux-kernel@...r.kernel.org,
        Vitor Soares <Vitor.Soares@...opsys.com>,
        Geert Uytterhoeven <geert@...ux-m68k.org>,
        Linus Walleij <linus.walleij@...aro.org>,
        Xiang Lin <Xiang.Lin@...aptics.com>, linux-gpio@...r.kernel.org
Subject: Re: [PATCH v3 11/11] dt-bindings: gpio: Add bindings for Cadence I3C
 gpio expander

On Fri, Mar 23, 2018 at 12:00:20PM +0100, Boris Brezillon wrote:
> Document the Cadence I3C gpio expander bindings.
> 
> Signed-off-by: Boris Brezillon <boris.brezillon@...tlin.com>
> ---
>  .../devicetree/bindings/gpio/gpio-cdns-i3c.txt     | 38 ++++++++++++++++++++++
>  1 file changed, 38 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/gpio/gpio-cdns-i3c.txt
> 
> diff --git a/Documentation/devicetree/bindings/gpio/gpio-cdns-i3c.txt b/Documentation/devicetree/bindings/gpio/gpio-cdns-i3c.txt
> new file mode 100644
> index 000000000000..634b1f268215
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/gpio/gpio-cdns-i3c.txt
> @@ -0,0 +1,38 @@
> +* Cadence I3C GPIO expander
> +
> +The Cadence I3C GPIO expander provides 8 GPIOs controllable over I3C.
> +This GPIOs can be configured in output or input mode and if they are in input
> +mode they can generate IBIs (In Band Interrupts).
> +
> +Required properties for GPIO node:
> +- reg : 3 cells encoding the I3C static address (none in our case) and the I3C
> +	Provisional ID. See Documentation/devicetree/bindings/i3c/i3c.txt for
> +	more details.
> +	Should be <0x0 0x392 0x0>.
> +- gpio-controller : Marks the device node as a gpio controller.
> +- #gpio-cells : Should be two. The first cell is the pin number and
> +  the second cell is used to specify the gpio polarity:
> +      0 = active high
> +      1 = active low
> +- interrupt-controller: Marks the device node as an interrupt controller.
> +- #interrupt-cells : Should be 2.  The first cell is the GPIO number.
> +  The second cell bits[3:0] is used to specify trigger type and level flags:
> +      1 = low-to-high edge triggered.
> +      2 = high-to-low edge triggered.
> +      3 = triggered on both edges.
> +      4 = active high level-sensitive.
> +      8 = active low level-sensitive.
> +
> +Example:
> +
> +	i3c-master@xxx {
> +		...
> +		i3c_gpio_expander: gpio@0,1c9,0 {

The unit address is wrong here.

> +			reg = <0 0x392 0x0>;
> +			gpio-controller;
> +			#gpio-cells = <2>;
> +			interrupt-controller;
> +			#interrupt-cells = <2>;
> +		};
> +		...
> +	};
> -- 
> 2.14.1
>