| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20180330072516.bqkygev7qxp4dpig@verge.net.au>
Date: Fri, 30 Mar 2018 09:25:16 +0200
From: Simon Horman <horms@...ge.net.au>
To: jacopo mondi <jacopo@...ndi.org>
Cc: Michel Pollet <michel.pollet@...renesas.com>,
linux-renesas-soc@...r.kernel.org, phil.edworthy@...esas.com,
Michel Pollet <buserror+upstream@...il.com>,
Magnus Damm <magnus.damm@...il.com>,
Rob Herring <robh+dt@...nel.org>,
Mark Rutland <mark.rutland@....com>,
Lee Jones <lee.jones@...aro.org>,
Russell King <linux@...linux.org.uk>,
Sebastian Reichel <sre@...nel.org>, devicetree@...r.kernel.org,
linux-kernel@...r.kernel.org, linux-arm-kernel@...ts.infradead.org,
linux-pm@...r.kernel.org
Subject: Re: [PATCH v3 6/8] DT: arm: Add Renesas RZ/N1 SoC base device tree
file
On Thu, Mar 29, 2018 at 01:04:50PM +0200, jacopo mondi wrote:
> Hi Michel
>
> The subject of all your patches for arch/arm should start with:
>
> ARM: dts:
>
> A git log on that directory clearly shows that's the preferred one.
>
> I would also say that you are missing a symbol definition in
> arch/arm/mach-shmobile/Kconfig
> (even if you got rid of any board file)
>
> I would expect a symbol to select in menuconfig, with your
> dependencies listed there (ie, the serial interface driver)
>
> Something like this (I left the 'xx' out from the part name on purpose)
>
> diff --git a/arch/arm/mach-shmobile/Kconfig b/arch/arm/mach-shmobile/Kconfig
> index 280e731..9a519330 100644
> --- a/arch/arm/mach-shmobile/Kconfig
> +++ b/arch/arm/mach-shmobile/Kconfig
> @@ -114,4 +114,8 @@ config ARCH_SH73A0
> bool "SH-Mobile AG5 (R8A73A00)"
> select ARCH_RMOBILE
> select RENESAS_INTC_IRQPIN
> +
> +config ARCH_R9A06G0
> + bool "RZ/N1 (R9A06G0)"
> + select SERIAL_8250_DW
> endif
>
> But please wait for others (preferibly Geert or Simon) to confim this.
I think that is covered by
"[PATCH v3 5/8] arm: shmobile: Add the RZ/N1 arch to the shmobile Kconfig"
> On Thu, Mar 29, 2018 at 08:47:02AM +0100, Michel Pollet wrote:
> > This adds the Renesas RZ/N1 Family (Part #R9A06G0xx) SoC
> > bare bone support.
> >
> > This currently only handles generic parts (gic, architected timer)
> > and a UART.
> > For simplicity sake, this also relies on the bootloader to set the
> > pinctrl and clocks.
> >
> > Signed-off-by: Michel Pollet <michel.pollet@...renesas.com>
> > ---
> > arch/arm/boot/dts/r9a06g0xx.dtsi | 96 ++++++++++++++++++++++++++++++++++++++++
> > 1 file changed, 96 insertions(+)
> > create mode 100644 arch/arm/boot/dts/r9a06g0xx.dtsi
> >
> > diff --git a/arch/arm/boot/dts/r9a06g0xx.dtsi b/arch/arm/boot/dts/r9a06g0xx.dtsi
> > new file mode 100644
> > index 0000000..c6eeee3
> > --- /dev/null
> > +++ b/arch/arm/boot/dts/r9a06g0xx.dtsi
> > @@ -0,0 +1,96 @@
> > +// SPDX-License-Identifier: GPL-2.0
> > +/*
> > + * Base Device Tree Source for the Renesas RZ/N1 SoC Family of devices
> > + *
> > + * Copyright (C) 2018 Renesas Electronics Europe Limited
> > + *
> > + */
> > +
> > +#include <dt-bindings/interrupt-controller/arm-gic.h>
> > +
> > +/ {
> > + compatible = "renesas,rzn1";
> > + #address-cells = <1>;
> > + #size-cells = <1>;
> > +
> > + cpus {
> > + #address-cells = <1>;
> > + #size-cells = <0>;
> > +
> > + cpu@0 {
> > + device_type = "cpu";
> > + compatible = "arm,cortex-a7";
> > + reg = <0>;
> > + };
> > + cpu@1 {
> > + device_type = "cpu";
> > + compatible = "arm,cortex-a7";
> > + reg = <1>;
> > + };
> > + };
>
> I see you don't like empy lines, that's fine, it is not a strict
> requiremen afaik, but I find a few empty lines here and there more
> redable, expecially if the file is going to grow, as it will be.
Please place one empty line between each node.
> > + clocks {
> > + /*
> > + * this is fixed clock for now,
> > + * until the clock driver is merged
> > + */
> > + clkuarts: clkuarts {
>
> You can remove the node lable if it's the same as the node name afaik
>
> > + #clock-cells = <0>;
> > + compatible = "fixed-clock";
> > + clock-frequency = <47619047>;
> > + };
> > + };
>
> Grouping clock nodes under a "clocks" one is now deprecated.
>
> Please see, ie.
> "ARM: dts: r7s72100: stop grouping clocks under a "clocks" subnode"
Also, please sort sub-nodes of the root node alphabetically.
> Thanks
> j
>
> > + arch-timer {
> > + compatible = "arm,cortex-a7-timer",
> > + "arm,armv7-timer";
> > + interrupt-parent = <&gic>;
> > + arm,cpu-registers-not-fw-configured;
> > + interrupts =
> > + <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) |
> > + IRQ_TYPE_LEVEL_LOW)>,
> > + <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(2) |
> > + IRQ_TYPE_LEVEL_LOW)>,
> > + <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(2) |
> > + IRQ_TYPE_LEVEL_LOW)>,
> > + <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(2) |
> > + IRQ_TYPE_LEVEL_LOW)>;
I think its nicer not to line-wrap the individual interrupts.
I.e. please make the above like this:
interrupts =
<GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
<GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
<GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
<GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>;
> > + };
> > + soc {
> > + compatible = "simple-bus";
> > + #address-cells = <1>;
> > + #size-cells = <1>;
> > + interrupt-parent = <&gic>;
> > + ranges;
> > +
> > + gic: gic@...01000 {
Please sort subnodes of the soc node using:
- Primary key of bus address
- Secondary key of IP block type (does not apply here)
> > + compatible = "arm,cortex-a7-gic", "arm,gic-400";
> > + interrupt-controller;
> > + #interrupt-cells = <3>;
> > + reg = <0x44101000 0x1000>, /* Distributer */
> > + <0x44102000 0x2000>, /* CPU interface */
> > + <0x44104000 0x2000>, /* Virt interface control */
> > + <0x44106000 0x2000>; /* Virt CPU interface */
> > + interrupts =
> > + <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(2) |
> > + IRQ_TYPE_LEVEL_HIGH)>;
> > + };
> > + sysctrl: sysctrl@...0c000 {
> > + compatible = "renesas,rzn1-sysctrl", "syscon",
> > + "simple-mfd";
> > + reg = <0x4000c000 0x1000>;
> > +
> > + reboot {
> > + compatible = "renesas,rzn1-reboot";
> > + };
> > + };
> > + uart0: serial@...60000 {
> > + compatible = "snps,dw-apb-uart";
> > + reg = <0x40060000 0x400>;
> > + interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
> > + reg-shift = <2>;
> > + reg-io-width = <4>;
> > + clocks = <&clkuarts>;
> > + clock-names = "baudclk";
> > + status = "disabled";
> > + };
> > + };
> > +};
> > --
> > 2.7.4
> >
Powered by blists - more mailing lists