[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20180330072649.fvl46dfoha7gfxig@verge.net.au>
Date: Fri, 30 Mar 2018 09:26:50 +0200
From: Simon Horman <horms@...ge.net.au>
To: Michel Pollet <michel.pollet@...renesas.com>
Cc: linux-renesas-soc@...r.kernel.org, phil.edworthy@...esas.com,
Michel Pollet <buserror+upstream@...il.com>,
Magnus Damm <magnus.damm@...il.com>,
Rob Herring <robh+dt@...nel.org>,
Mark Rutland <mark.rutland@....com>,
Lee Jones <lee.jones@...aro.org>,
Russell King <linux@...linux.org.uk>,
Sebastian Reichel <sre@...nel.org>, devicetree@...r.kernel.org,
linux-kernel@...r.kernel.org, linux-arm-kernel@...ts.infradead.org,
linux-pm@...r.kernel.org
Subject: Re: [PATCH v3 7/8] DT: arm: Add Renesas RZN1D-DB Board base file
On Thu, Mar 29, 2018 at 08:47:03AM +0100, Michel Pollet wrote:
> This adds a base device tree file for the RZN1-DB board, with only the
> basic support allowing the system to boot to a prompt. Only one UART is
> used, with only a single CPU running.
>
> Signed-off-by: Michel Pollet <michel.pollet@...renesas.com>
> ---
> arch/arm/boot/dts/r9a06g032-rzn1d400-db.dts | 26 ++++++++++++++++++++++++++
> 1 file changed, 26 insertions(+)
> create mode 100644 arch/arm/boot/dts/r9a06g032-rzn1d400-db.dts
>
> diff --git a/arch/arm/boot/dts/r9a06g032-rzn1d400-db.dts b/arch/arm/boot/dts/r9a06g032-rzn1d400-db.dts
> new file mode 100644
> index 0000000..a462b1a
> --- /dev/null
> +++ b/arch/arm/boot/dts/r9a06g032-rzn1d400-db.dts
> @@ -0,0 +1,26 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * Device Tree Source for the RZN1D-DB Board
> + *
> + * Copyright (C) 2018 Renesas Electronics Europe Limited
> + *
> + */
> +
> +/dts-v1/;
> +
> +#include "r9a06g0xx.dtsi"
> +
> +/ {
> + model = "RZN1D-DB Board";
> + compatible = "renesas,rzn1d400-db", "renesas,r9a06g032", "renesas,rzn1";
> +
> + chosen {
> + stdout-path = "serial0:115200n8";
> + };
> + aliases {
> + serial0 = &uart0;
> + };
> +};
> +&uart0 {
> + status = "okay";
> +};
Please add a blank line between nodes.
Please use "ARM: dts: " as the patch prefix.
Powered by blists - more mailing lists