[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20180408201702.23299-1-esben.haabendal@gmail.com>
Date: Sun, 8 Apr 2018 22:17:01 +0200
From: Esben Haabendal <esben.haabendal@...il.com>
To: netdev@...r.kernel.org
Cc: Esben Haabendal <eha@...f.com>,
Richard Cochran <richardcochran@...il.com>,
Andrew Lunn <andrew@...n.ch>,
Florian Fainelli <f.fainelli@...il.com>,
linux-kernel@...r.kernel.org
Subject: [PATCH v3] dp83640: Ensure against premature access to PHY registers after reset
From: Esben Haabendal <eha@...f.com>
The datasheet specifies a 3uS pause after performing a software
reset. The default implementation of genphy_soft_reset() does not
provide this, so implement soft_reset with the needed pause.
Signed-off-by: Esben Haabendal <eha@...f.com>
Reviewed-by: Andrew Lunn <andrew@...n.ch>
---
drivers/net/phy/dp83640.c | 18 ++++++++++++++++++
1 file changed, 18 insertions(+)
diff --git a/drivers/net/phy/dp83640.c b/drivers/net/phy/dp83640.c
index 654f42d00092..a6c87793d899 100644
--- a/drivers/net/phy/dp83640.c
+++ b/drivers/net/phy/dp83640.c
@@ -1207,6 +1207,23 @@ static void dp83640_remove(struct phy_device *phydev)
kfree(dp83640);
}
+static int dp83640_soft_reset(struct phy_device *phydev)
+{
+ int ret;
+
+ ret = genphy_soft_reset(phydev);
+ if (ret < 0)
+ return ret;
+
+ /* From DP83640 datasheet: "Software driver code must wait 3 us
+ * following a software reset before allowing further serial MII
+ * operations with the DP83640."
+ */
+ udelay(10); /* Taking udelay inaccuracy into account */
+
+ return 0;
+}
+
static int dp83640_config_init(struct phy_device *phydev)
{
struct dp83640_private *dp83640 = phydev->priv;
@@ -1501,6 +1518,7 @@ static struct phy_driver dp83640_driver = {
.flags = PHY_HAS_INTERRUPT,
.probe = dp83640_probe,
.remove = dp83640_remove,
+ .soft_reset = dp83640_soft_reset,
.config_init = dp83640_config_init,
.ack_interrupt = dp83640_ack_interrupt,
.config_intr = dp83640_config_intr,
--
2.16.3
Powered by blists - more mailing lists