Message-Id: <1523637411-8531-14-git-send-email-hernan@vanguardiasur.com.ar>
Date:   Fri, 13 Apr 2018 13:36:50 -0300
From:   Hernán Gonzalez <hernan@...guardiasur.com.ar>
To:     jic23@...nel.org, knaack.h@....de, lars@...afoo.de,
        pmeerw@...erw.net, gregkh@...uxfoundation.org,
        Michael.Hennerich@...log.com, linux-iio@...r.kernel.org,
        linux-kernel@...r.kernel.org
Cc:     Hernán Gonzalez <hernan@...guardiasur.com.ar>
Subject: [PATCH v2 13/14] Move ad7746 out of staging

Signed-off-by: Hernán Gonzalez <hernan@...guardiasur.com.ar>
---
 .../devicetree/bindings/iio/cdc/ad7746.txt         |  34 +
 drivers/iio/Kconfig                                |   1 +
 drivers/iio/Makefile                               |   1 +
 drivers/iio/cdc/Kconfig                            |  16 +
 drivers/iio/cdc/Makefile                           |   5 +
 drivers/iio/cdc/ad7746.c                           | 855 +++++++++++++++++++++
 include/linux/iio/cdc/ad7746.h                     |  20 +
 7 files changed, 932 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/iio/cdc/ad7746.txt
 create mode 100644 drivers/iio/cdc/Kconfig
 create mode 100644 drivers/iio/cdc/Makefile
 create mode 100644 drivers/iio/cdc/ad7746.c
 create mode 100644 include/linux/iio/cdc/ad7746.h

diff --git a/Documentation/devicetree/bindings/iio/cdc/ad7746.txt b/Documentation/devicetree/bindings/iio/cdc/ad7746.txt
new file mode 100644
index 0000000..7740f05
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/cdc/ad7746.txt
@@ -0,0 +1,34 @@
+Analog Devices AD7746/5/7 capacitive sensor driver
+
+Required properties:
+	- compatible: Should be one of
+		* "adi,ad7745"
+		* "adi,ad7746"
+	  * "adi,ad7747"
+	- reg: The 7-bits long I2c address of the device
+
+Optional properties:
+	- adi,exclvl: This property defines the excitation voltage level for the
+    capacitance to be measured. Possible values are:
+      * 0 = +-VDD/8
+      * 1 = +-VDD/4
+      * 2 = +-VDD * 3/8
+      * 3 = +-VDD/2 (Default)
+	- adi,nexca_en: Invert excitation output A.
+	- adi,nexcb_en:	Invert excitation output B.
+
+Example:
+Here exclvl would be 1 (VDD/4), Excitation pin A would be inverted and
+Excitation pin B would NOT be inverted.
+
+i2c2 {
+
+      < . . . >
+
+      ad7746: ad7746@60 {
+              compatible = "ad7746";
+              reg = <0x60>;
+              adi,exclvl = <1>;
+              adi,nexca_en;
+      };
+};
diff --git a/drivers/iio/Kconfig b/drivers/iio/Kconfig
index b3c8c6e..d1c309b 100644
--- a/drivers/iio/Kconfig
+++ b/drivers/iio/Kconfig
@@ -71,6 +71,7 @@ config IIO_TRIGGERED_EVENT
 source "drivers/iio/accel/Kconfig"
 source "drivers/iio/adc/Kconfig"
 source "drivers/iio/amplifiers/Kconfig"
+source "drivers/iio/cdc/Kconfig"
 source "drivers/iio/chemical/Kconfig"
 source "drivers/iio/common/Kconfig"
 source "drivers/iio/counter/Kconfig"
diff --git a/drivers/iio/Makefile b/drivers/iio/Makefile
index b16b2e9..18bea8d 100644
--- a/drivers/iio/Makefile
+++ b/drivers/iio/Makefile
@@ -17,6 +17,7 @@ obj-y += accel/
 obj-y += adc/
 obj-y += amplifiers/
 obj-y += buffer/
+obj-y += cdc/
 obj-y += chemical/
 obj-y += common/
 obj-y += counter/
diff --git a/drivers/iio/cdc/Kconfig b/drivers/iio/cdc/Kconfig
new file mode 100644
index 0000000..d3a8600
--- /dev/null
+++ b/drivers/iio/cdc/Kconfig
@@ -0,0 +1,16 @@
+#
+# CDC drivers
+#
+menu "Capacitance to digital converters"
+
+config AD7746
+	tristate "Analog Devices AD7745, AD7746 AD7747 capacitive sensor driver"
+	depends on I2C
+	help
+	  Say yes here to build support for Analog Devices capacitive sensors.
+	  (AD7745, AD7746, AD7747) Provides direct access via sysfs.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called ad7746.
+
+endmenu
diff --git a/drivers/iio/cdc/Makefile b/drivers/iio/cdc/Makefile
new file mode 100644
index 0000000..1f71283
--- /dev/null
+++ b/drivers/iio/cdc/Makefile
@@ -0,0 +1,5 @@
+#
+#Makeefile for industrial I/O CDC drivers
+#
+
+obj-$(CONFIG_AD7746) += ad7746.o
diff --git a/drivers/iio/cdc/ad7746.c b/drivers/iio/cdc/ad7746.c
new file mode 100644
index 0000000..f283819
--- /dev/null
+++ b/drivers/iio/cdc/ad7746.c
@@ -0,0 +1,855 @@
+/*
+ * AD7746 capacitive sensor driver supporting AD7745, AD7746 and AD7747
+ *
+ * Copyright 2011 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2.
+ */
+
+#include <linux/delay.h>
+#include <linux/device.h>
+#include <linux/i2c.h>
+#include <linux/interrupt.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/stat.h>
+#include <linux/sysfs.h>
+
+#include <linux/iio/iio.h>
+#include <linux/iio/sysfs.h>
+#include <linux/iio/cdc/ad7746.h>
+
+/*
+ * AD7746 Register Definition
+ */
+
+#define AD7746_REG_CAP_DATA_HIGH	1
+#define AD7746_REG_VT_DATA_HIGH		4
+#define AD7746_REG_CAP_SETUP		7
+#define AD7746_REG_VT_SETUP		8
+#define AD7746_REG_EXC_SETUP		9
+#define AD7746_REG_CFG			10
+#define AD7746_REG_CAPDACA		11
+#define AD7746_REG_CAPDACB		12
+#define AD7746_REG_CAP_OFFH		13
+#define AD7746_REG_CAP_GAINH		15
+#define AD7746_REG_VOLT_GAINH		17
+
+/* Capacitive Channel Setup Register Bit Designations (AD7746_REG_CAP_SETUP) */
+#define AD7746_CAPSETUP_CAPEN		BIT(7)
+#define AD7746_CAPSETUP_CIN2		BIT(6) /* AD7746 only */
+#define AD7746_CAPSETUP_CAPDIFF		BIT(5)
+#define AD7746_CAPSETUP_CACHOP		BIT(0)
+
+/* Voltage/Temperature Setup Register Bit Designations (AD7746_REG_VT_SETUP) */
+#define AD7746_VTSETUP_VTEN		(1 << 7)
+#define AD7746_VTSETUP_VTMD_INT_TEMP	(0 << 5)
+#define AD7746_VTSETUP_VTMD_EXT_TEMP	(1 << 5)
+#define AD7746_VTSETUP_VTMD_VDD_MON	(2 << 5)
+#define AD7746_VTSETUP_VTMD_EXT_VIN	(3 << 5)
+#define AD7746_VTSETUP_EXTREF		BIT(4)
+#define AD7746_VTSETUP_VTSHORT		BIT(1)
+#define AD7746_VTSETUP_VTCHOP		BIT(0)
+
+/* Excitation Setup Register Bit Designations (AD7746_REG_EXC_SETUP) */
+#define AD7746_EXCSETUP_CLKCTRL		BIT(7)
+#define AD7746_EXCSETUP_EXCON		BIT(6)
+#define AD7746_EXCSETUP_EXCB		BIT(5)
+#define AD7746_EXCSETUP_NEXCB		BIT(4)
+#define AD7746_EXCSETUP_EXCA		BIT(3)
+#define AD7746_EXCSETUP_NEXCA		BIT(2)
+#define AD7746_EXCSETUP_EXCLVL(x)	(((x) & 0x3) << 0)
+
+/* Config Register Bit Designations (AD7746_REG_CFG) */
+#define AD7746_CONF_VTFS_SHIFT		6
+#define AD7746_CONF_CAPFS_SHIFT		3
+#define AD7746_CONF_VTFS_MASK		GENMASK(7, 6)
+#define AD7746_CONF_CAPFS_MASK		GENMASK(5, 3)
+#define AD7746_CONF_MODE_IDLE		(0 << 0)
+#define AD7746_CONF_MODE_CONT_CONV	(1 << 0)
+#define AD7746_CONF_MODE_SINGLE_CONV	(2 << 0)
+#define AD7746_CONF_MODE_PWRDN		(3 << 0)
+#define AD7746_CONF_MODE_OFFS_CAL	(5 << 0)
+#define AD7746_CONF_MODE_GAIN_CAL	(6 << 0)
+
+/* CAPDAC Register Bit Designations (AD7746_REG_CAPDACx) */
+#define AD7746_CAPDAC_DACEN		BIT(7)
+#define AD7746_CAPDAC_DACP(x)		((x) & 0x7F)
+
+/*
+ * struct ad7746_chip_info - chip specific information
+ */
+
+struct ad7746_chip_info {
+	struct i2c_client *client;
+	struct mutex lock; /* protect sensor state */
+	/*
+	 * Capacitive channel digital filter setup;
+	 * conversion time/update rate setup per channel
+	 */
+	u8	config;
+	u8	cap_setup;
+	u8	vt_setup;
+	u8	capdac[2][2];
+	s8	capdac_set;
+
+	union {
+		__be32 d32;
+		u8 d8[4];
+	} data ____cacheline_aligned;
+};
+
+enum ad7746_chan {
+	VIN,
+	VIN_VDD,
+	TEMP_INT,
+	TEMP_EXT,
+	CIN1,
+	CIN1_DIFF,
+	CIN2,
+	CIN2_DIFF,
+};
+
+static const struct iio_chan_spec ad7746_channels[] = {
+	[VIN] = {
+		.type = IIO_VOLTAGE,
+		.indexed = 1,
+		.channel = 0,
+		.info_mask_separate = BIT(IIO_CHAN_INFO_RAW),
+		.info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE) |
+			BIT(IIO_CHAN_INFO_SAMP_FREQ),
+		.address = AD7746_REG_VT_DATA_HIGH << 8 |
+			AD7746_VTSETUP_VTMD_EXT_VIN,
+	},
+	[VIN_VDD] = {
+		.type = IIO_VOLTAGE,
+		.indexed = 1,
+		.channel = 1,
+		.extend_name = "supply",
+		.info_mask_separate = BIT(IIO_CHAN_INFO_RAW),
+		.info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE) |
+			BIT(IIO_CHAN_INFO_SAMP_FREQ),
+		.address = AD7746_REG_VT_DATA_HIGH << 8 |
+			AD7746_VTSETUP_VTMD_VDD_MON,
+	},
+	[TEMP_INT] = {
+		.type = IIO_TEMP,
+		.indexed = 1,
+		.channel = 0,
+		.info_mask_separate = BIT(IIO_CHAN_INFO_PROCESSED),
+		.address = AD7746_REG_VT_DATA_HIGH << 8 |
+			AD7746_VTSETUP_VTMD_INT_TEMP,
+	},
+	[TEMP_EXT] = {
+		.type = IIO_TEMP,
+		.indexed = 1,
+		.channel = 1,
+		.info_mask_separate = BIT(IIO_CHAN_INFO_PROCESSED),
+		.address = AD7746_REG_VT_DATA_HIGH << 8 |
+			AD7746_VTSETUP_VTMD_EXT_TEMP,
+	},
+	[CIN1] = {
+		.type = IIO_CAPACITANCE,
+		.indexed = 1,
+		.channel = 0,
+		.info_mask_separate = BIT(IIO_CHAN_INFO_RAW) |
+		BIT(IIO_CHAN_INFO_CALIBSCALE) | BIT(IIO_CHAN_INFO_OFFSET),
+		.info_mask_shared_by_type = BIT(IIO_CHAN_INFO_CALIBBIAS) |
+		BIT(IIO_CHAN_INFO_SCALE) | BIT(IIO_CHAN_INFO_SAMP_FREQ),
+		.address = AD7746_REG_CAP_DATA_HIGH << 8,
+	},
+	[CIN1_DIFF] = {
+		.type = IIO_CAPACITANCE,
+		.differential = 1,
+		.indexed = 1,
+		.channel = 0,
+		.channel2 = 2,
+		.info_mask_separate = BIT(IIO_CHAN_INFO_RAW) |
+		BIT(IIO_CHAN_INFO_CALIBSCALE) | BIT(IIO_CHAN_INFO_OFFSET),
+		.info_mask_shared_by_type = BIT(IIO_CHAN_INFO_CALIBBIAS) |
+		BIT(IIO_CHAN_INFO_SCALE) | BIT(IIO_CHAN_INFO_SAMP_FREQ),
+		.address = AD7746_REG_CAP_DATA_HIGH << 8 |
+			AD7746_CAPSETUP_CAPDIFF
+	},
+	[CIN2] = {
+		.type = IIO_CAPACITANCE,
+		.indexed = 1,
+		.channel = 1,
+		.info_mask_separate = BIT(IIO_CHAN_INFO_RAW) |
+		BIT(IIO_CHAN_INFO_CALIBSCALE) | BIT(IIO_CHAN_INFO_OFFSET),
+		.info_mask_shared_by_type = BIT(IIO_CHAN_INFO_CALIBBIAS) |
+		BIT(IIO_CHAN_INFO_SCALE) | BIT(IIO_CHAN_INFO_SAMP_FREQ),
+		.address = AD7746_REG_CAP_DATA_HIGH << 8 |
+			AD7746_CAPSETUP_CIN2,
+	},
+	[CIN2_DIFF] = {
+		.type = IIO_CAPACITANCE,
+		.differential = 1,
+		.indexed = 1,
+		.channel = 1,
+		.channel2 = 3,
+		.info_mask_separate = BIT(IIO_CHAN_INFO_RAW) |
+		BIT(IIO_CHAN_INFO_CALIBSCALE) | BIT(IIO_CHAN_INFO_OFFSET),
+		.info_mask_shared_by_type = BIT(IIO_CHAN_INFO_CALIBBIAS) |
+		BIT(IIO_CHAN_INFO_SCALE) | BIT(IIO_CHAN_INFO_SAMP_FREQ),
+		.address = AD7746_REG_CAP_DATA_HIGH << 8 |
+			AD7746_CAPSETUP_CAPDIFF | AD7746_CAPSETUP_CIN2,
+	}
+};
+
+/* Values are Update Rate (Hz), Conversion Time (ms) + 1*/
+static const unsigned char ad7746_vt_filter_rate_table[][2] = {
+	{50, 20 + 1}, {31, 32 + 1}, {16, 62 + 1}, {8, 122 + 1},
+};
+
+static const unsigned char ad7746_cap_filter_rate_table[][2] = {
+	{91, 11 + 1}, {84, 12 + 1}, {50, 20 + 1}, {26, 38 + 1},
+	{16, 62 + 1}, {13, 77 + 1}, {11, 92 + 1}, {9, 110 + 1},
+};
+
+static int ad7746_select_channel(struct iio_dev *indio_dev,
+				 struct iio_chan_spec const *chan)
+{
+	struct ad7746_chip_info *chip = iio_priv(indio_dev);
+	u8 vt_setup, cap_setup;
+	int ret, delay, idx;
+
+	switch (chan->type) {
+	case IIO_CAPACITANCE:
+		cap_setup = (chan->address & 0xFF) | AD7746_CAPSETUP_CAPEN;
+		vt_setup = chip->vt_setup & ~AD7746_VTSETUP_VTEN;
+		idx = (chip->config & AD7746_CONF_CAPFS_MASK) >>
+			AD7746_CONF_CAPFS_SHIFT;
+		delay = ad7746_cap_filter_rate_table[idx][1];
+
+		if (chip->capdac_set != chan->channel) {
+			ret = i2c_smbus_write_byte_data(chip->client,
+				AD7746_REG_CAPDACA,
+				chip->capdac[chan->channel][0]);
+			if (ret < 0)
+				return ret;
+			ret = i2c_smbus_write_byte_data(chip->client,
+				AD7746_REG_CAPDACB,
+				chip->capdac[chan->channel][1]);
+			if (ret < 0)
+				return ret;
+
+			chip->capdac_set = chan->channel;
+		}
+		break;
+	case IIO_VOLTAGE:
+	case IIO_TEMP:
+		vt_setup = (chan->address & 0xFF) | AD7746_VTSETUP_VTEN;
+		cap_setup = chip->cap_setup & ~AD7746_CAPSETUP_CAPEN;
+		idx = (chip->config & AD7746_CONF_VTFS_MASK) >>
+			AD7746_CONF_VTFS_SHIFT;
+		delay = ad7746_cap_filter_rate_table[idx][1];
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	if (chip->cap_setup != cap_setup) {
+		ret = i2c_smbus_write_byte_data(chip->client,
+						AD7746_REG_CAP_SETUP,
+						cap_setup);
+		if (ret < 0)
+			return ret;
+
+		chip->cap_setup = cap_setup;
+	}
+
+	if (chip->vt_setup != vt_setup) {
+		ret = i2c_smbus_write_byte_data(chip->client,
+						AD7746_REG_VT_SETUP,
+						vt_setup);
+		if (ret < 0)
+			return ret;
+
+		chip->vt_setup = vt_setup;
+	}
+
+	return delay;
+}
+
+static inline ssize_t ad7746_start_calib(struct device *dev,
+					 struct device_attribute *attr,
+					 const char *buf,
+					 size_t len,
+					 u8 regval)
+{
+	struct iio_dev *indio_dev = dev_to_iio_dev(dev);
+	struct ad7746_chip_info *chip = iio_priv(indio_dev);
+	int ret, timeout = 10;
+	bool doit;
+
+	ret = strtobool(buf, &doit);
+	if (ret < 0)
+		return ret;
+
+	if (!doit)
+		return 0;
+
+	mutex_lock(&chip->lock);
+	regval |= chip->config;
+	ret = i2c_smbus_write_byte_data(chip->client, AD7746_REG_CFG, regval);
+	if (ret < 0)
+		goto unlock;
+
+	do {
+		msleep(20);
+		ret = i2c_smbus_read_byte_data(chip->client, AD7746_REG_CFG);
+		if (ret < 0)
+			goto unlock;
+
+	} while ((ret == regval) && timeout--);
+
+	mutex_unlock(&chip->lock);
+
+	return len;
+
+unlock:
+	mutex_unlock(&chip->lock);
+	return ret;
+}
+
+static ssize_t ad7746_start_offset_calib(struct device *dev,
+					 struct device_attribute *attr,
+					 const char *buf,
+					 size_t len)
+{
+	struct iio_dev *indio_dev = dev_to_iio_dev(dev);
+	int ret = ad7746_select_channel(indio_dev,
+			      &ad7746_channels[to_iio_dev_attr(attr)->address]);
+	if (ret < 0)
+		return ret;
+
+	return ad7746_start_calib(dev, attr, buf, len,
+				  AD7746_CONF_MODE_OFFS_CAL);
+}
+
+static ssize_t ad7746_start_gain_calib(struct device *dev,
+				       struct device_attribute *attr,
+				       const char *buf,
+				       size_t len)
+{
+	struct iio_dev *indio_dev = dev_to_iio_dev(dev);
+	int ret = ad7746_select_channel(indio_dev,
+			      &ad7746_channels[to_iio_dev_attr(attr)->address]);
+	if (ret < 0)
+		return ret;
+
+	return ad7746_start_calib(dev, attr, buf, len,
+				  AD7746_CONF_MODE_GAIN_CAL);
+}
+
+static IIO_DEVICE_ATTR(in_capacitance0_calibbias_calibration,
+		       0200, NULL, ad7746_start_offset_calib, CIN1);
+static IIO_DEVICE_ATTR(in_capacitance1_calibbias_calibration,
+		       0200, NULL, ad7746_start_offset_calib, CIN2);
+static IIO_DEVICE_ATTR(in_capacitance0_calibscale_calibration,
+		       0200, NULL, ad7746_start_gain_calib, CIN1);
+static IIO_DEVICE_ATTR(in_capacitance1_calibscale_calibration,
+		       0200, NULL, ad7746_start_gain_calib, CIN2);
+static IIO_DEVICE_ATTR(in_voltage0_calibscale_calibration,
+		       0200, NULL, ad7746_start_gain_calib, VIN);
+
+static int ad7746_store_cap_filter_rate_setup(struct ad7746_chip_info *chip,
+					      int val)
+{
+	int i;
+
+	for (i = 0; i < ARRAY_SIZE(ad7746_cap_filter_rate_table); i++)
+		if (val >= ad7746_cap_filter_rate_table[i][0])
+			break;
+
+	if (i >= ARRAY_SIZE(ad7746_cap_filter_rate_table))
+		i = ARRAY_SIZE(ad7746_cap_filter_rate_table) - 1;
+
+	chip->config &= ~AD7746_CONF_CAPFS_MASK;
+	chip->config |= i << AD7746_CONF_CAPFS_SHIFT;
+
+	return 0;
+}
+
+static int ad7746_store_vt_filter_rate_setup(struct ad7746_chip_info *chip,
+					     int val)
+{
+	int i;
+
+	for (i = 0; i < ARRAY_SIZE(ad7746_vt_filter_rate_table); i++)
+		if (val >= ad7746_vt_filter_rate_table[i][0])
+			break;
+
+	if (i >= ARRAY_SIZE(ad7746_vt_filter_rate_table))
+		i = ARRAY_SIZE(ad7746_vt_filter_rate_table) - 1;
+
+	chip->config &= ~AD7746_CONF_VTFS_MASK;
+	chip->config |= i << AD7746_CONF_VTFS_SHIFT;
+
+	return 0;
+}
+
+static IIO_CONST_ATTR(in_voltage_sampling_frequency_available, "50 31 16 8");
+static IIO_CONST_ATTR(in_capacitance_sampling_frequency_available,
+		       "91 84 50 26 16 13 11 9");
+
+static struct attribute *ad7746_attributes[] = {
+	&iio_dev_attr_in_capacitance0_calibbias_calibration.dev_attr.attr,
+	&iio_dev_attr_in_capacitance0_calibscale_calibration.dev_attr.attr,
+	&iio_dev_attr_in_capacitance1_calibscale_calibration.dev_attr.attr,
+	&iio_dev_attr_in_capacitance1_calibbias_calibration.dev_attr.attr,
+	&iio_dev_attr_in_voltage0_calibscale_calibration.dev_attr.attr,
+	&iio_const_attr_in_voltage_sampling_frequency_available.dev_attr.attr,
+	&iio_const_attr_in_capacitance_sampling_frequency_available.dev_attr.attr,
+	NULL,
+};
+
+static const struct attribute_group ad7746_attribute_group = {
+	.attrs = ad7746_attributes,
+};
+
+static int ad7746_write_raw(struct iio_dev *indio_dev,
+			    struct iio_chan_spec const *chan,
+			    int val,
+			    int val2,
+			    long mask)
+{
+	struct ad7746_chip_info *chip = iio_priv(indio_dev);
+	int ret, reg;
+
+	mutex_lock(&chip->lock);
+
+	switch (mask) {
+	case IIO_CHAN_INFO_CALIBSCALE:
+		if (val != 1) {
+			ret = -EINVAL;
+			goto out;
+		}
+
+		/* 2^16 in micro */
+		val = (val2 * 1024) / 15625;
+
+		switch (chan->type) {
+		case IIO_CAPACITANCE:
+			reg = AD7746_REG_CAP_GAINH;
+			break;
+		case IIO_VOLTAGE:
+			reg = AD7746_REG_VOLT_GAINH;
+			break;
+		default:
+			ret = -EINVAL;
+			goto out;
+		}
+
+		ret = i2c_smbus_write_word_swapped(chip->client, reg, val);
+		if (ret < 0)
+			goto out;
+
+		ret = 0;
+		break;
+	case IIO_CHAN_INFO_CALIBBIAS:
+		if (val < 0 || val > 0xFFFF) {
+			ret = -EINVAL;
+			goto out;
+		}
+		ret = i2c_smbus_write_word_swapped(chip->client,
+						   AD7746_REG_CAP_OFFH, val);
+		if (ret < 0)
+			goto out;
+
+		ret = 0;
+		break;
+	case IIO_CHAN_INFO_OFFSET:
+		if (val < 0 || val > 43008000) { /* 21pF */
+			ret = -EINVAL;
+			goto out;
+		}
+
+		/*
+		 * CAPDAC Scale = 21pF_typ / 127
+		 * CIN Scale = 8.192pF / 2^24
+		 * Offset Scale = CAPDAC Scale / CIN Scale = 338646
+		 */
+
+		val /= 338646;
+
+		chip->capdac[chan->channel][chan->differential] = val > 0 ?
+			AD7746_CAPDAC_DACP(val) | AD7746_CAPDAC_DACEN : 0;
+
+		ret = i2c_smbus_write_byte_data(chip->client,
+						AD7746_REG_CAPDACA,
+						chip->capdac[chan->channel][0]);
+		if (ret < 0)
+			goto out;
+		ret = i2c_smbus_write_byte_data(chip->client,
+						AD7746_REG_CAPDACB,
+						chip->capdac[chan->channel][1]);
+		if (ret < 0)
+			goto out;
+
+		chip->capdac_set = chan->channel;
+
+		ret = 0;
+		break;
+	case IIO_CHAN_INFO_SAMP_FREQ:
+		if (val2) {
+			ret = -EINVAL;
+			goto out;
+		}
+
+		switch (chan->type) {
+		case IIO_CAPACITANCE:
+			ret = ad7746_store_cap_filter_rate_setup(chip, val);
+			break;
+		case IIO_VOLTAGE:
+			ret = ad7746_store_vt_filter_rate_setup(chip, val);
+			break;
+		default:
+			ret = -EINVAL;
+		}
+		break;
+	default:
+		ret = -EINVAL;
+	}
+
+out:
+	mutex_unlock(&chip->lock);
+	return ret;
+}
+
+static int ad7746_read_raw(struct iio_dev *indio_dev,
+			   struct iio_chan_spec const *chan,
+			   int *val, int *val2,
+			   long mask)
+{
+	struct ad7746_chip_info *chip = iio_priv(indio_dev);
+	int ret, delay, idx;
+	u8 regval, reg;
+
+	mutex_lock(&chip->lock);
+
+	switch (mask) {
+	case IIO_CHAN_INFO_RAW:
+	case IIO_CHAN_INFO_PROCESSED:
+		ret = ad7746_select_channel(indio_dev, chan);
+		if (ret < 0)
+			goto out;
+		delay = ret;
+
+		regval = chip->config | AD7746_CONF_MODE_SINGLE_CONV;
+		ret = i2c_smbus_write_byte_data(chip->client, AD7746_REG_CFG,
+						regval);
+		if (ret < 0)
+			goto out;
+
+		msleep(delay);
+		/* Now read the actual register */
+
+		ret = i2c_smbus_read_i2c_block_data(chip->client,
+						    chan->address >> 8, 3,
+						    &chip->data.d8[1]);
+
+		if (ret < 0)
+			goto out;
+
+		/*
+		 * Either for Capacitance, Voltage or Temperature,
+		 * the 0x000000 code represents negative full scale,
+		 * the 0x800000 code represents zero scale, and
+		 * the 0xFFFFFF code represents positive full scale.
+		 */
+
+		*val = (be32_to_cpu(chip->data.d32) & 0xFFFFFF) - 0x800000;
+
+		switch (chan->type) {
+		case IIO_TEMP:
+		/*
+		 * temperature in milli degrees Celsius
+		 * T = ((*val / 2048) - 4096) * 1000
+		 */
+			*val = (*val * 125) / 256;
+			break;
+		case IIO_VOLTAGE:
+
+			/*
+			 * The voltage from the VDD pin is internally
+			 * attenuated by 6.
+			 */
+
+			if (chan->channel == 1) /* supply_raw */
+				*val = *val * 6;
+			break;
+		default:
+			break;
+		}
+
+		ret = IIO_VAL_INT;
+		break;
+	case IIO_CHAN_INFO_CALIBSCALE:
+		switch (chan->type) {
+		case IIO_CAPACITANCE:
+			reg = AD7746_REG_CAP_GAINH;
+			break;
+		case IIO_VOLTAGE:
+			reg = AD7746_REG_VOLT_GAINH;
+			break;
+		default:
+			ret = -EINVAL;
+			goto out;
+		}
+
+		ret = i2c_smbus_read_word_swapped(chip->client, reg);
+		if (ret < 0)
+			goto out;
+		/* 1 + gain_val / 2^16 */
+		*val = 1;
+		*val2 = (15625 * ret) / 1024;
+
+		ret = IIO_VAL_INT_PLUS_MICRO;
+		break;
+	case IIO_CHAN_INFO_CALIBBIAS:
+		ret = i2c_smbus_read_word_swapped(chip->client,
+						  AD7746_REG_CAP_OFFH);
+		if (ret < 0)
+			goto out;
+		*val = ret;
+
+		ret = IIO_VAL_INT;
+		break;
+	case IIO_CHAN_INFO_OFFSET:
+
+		/*
+		 * CAPDAC Scale = 21pF_typ / 127
+		 * CIN Scale = 8.192pF / 2^24
+		 * Offset Scale = CAPDAC Scale / CIN Scale = 338646
+		 */
+
+		*val = AD7746_CAPDAC_DACP(chip->capdac[chan->channel]
+					  [chan->differential]) * 338646;
+
+		ret = IIO_VAL_INT;
+		break;
+	case IIO_CHAN_INFO_SCALE:
+		switch (chan->type) {
+		case IIO_CAPACITANCE:
+			/* CIN Scale: 8.192pf / 2^24 */
+			*val =  0;
+			*val2 = 488;
+			ret = IIO_VAL_INT_PLUS_NANO;
+			break;
+		case IIO_VOLTAGE:
+			/* VIN Scale: 1170mV / 2^23 */
+			*val = 1170;
+			*val2 = 23;
+			ret = IIO_VAL_FRACTIONAL_LOG2;
+			break;
+		default:
+			ret = -EINVAL;
+			break;
+		}
+
+		break;
+	case IIO_CHAN_INFO_SAMP_FREQ:
+		switch (chan->type) {
+		case IIO_CAPACITANCE:
+			idx = (chip->config & AD7746_CONF_CAPFS_MASK) >>
+				AD7746_CONF_CAPFS_SHIFT;
+			*val = ad7746_cap_filter_rate_table[idx][0];
+			ret = IIO_VAL_INT;
+			break;
+		case IIO_VOLTAGE:
+			idx = (chip->config & AD7746_CONF_VTFS_MASK) >>
+				AD7746_CONF_VTFS_SHIFT;
+			*val = ad7746_vt_filter_rate_table[idx][0];
+			ret = IIO_VAL_INT;
+			break;
+		default:
+			ret = -EINVAL;
+		}
+		break;
+	default:
+		ret = -EINVAL;
+	}
+out:
+	mutex_unlock(&chip->lock);
+	return ret;
+}
+
+static const struct iio_info ad7746_info = {
+	.attrs = &ad7746_attribute_group,
+	.read_raw = ad7746_read_raw,
+	.write_raw = ad7746_write_raw,
+};
+
+/*
+ * device probe and remove
+ */
+#ifdef CONFIG_OF
+static struct ad7746_platform_data *ad7746_parse_dt(struct device *dev)
+{
+	struct device_node *np = dev->of_node;
+	struct ad7746_platform_data *pdata;
+	unsigned int tmp;
+	int ret;
+
+	/*
+	 * The default excitation outputs are not inverted, it should be stated
+	 * in the dt if needed.
+	 */
+
+	pdata = devm_kzalloc(dev, sizeof(*pdata), GFP_KERNEL);
+	if (!pdata)
+		return NULL;
+
+	ret = of_property_read_u32(np, "adi,exclvl", &tmp);
+	if (ret || tmp > 3) {
+		dev_warn(dev, "Wrong exclvl value, using default\n");
+		pdata->exclvl = 3;
+	} else {
+		pdata->exclvl = tmp;
+	}
+
+	pdata->exca_en = true;
+	pdata->excb_en = true;
+	pdata->exca_inv_en = of_property_read_bool(np, "adi,nexca_en");
+	pdata->excb_inv_en = of_property_read_bool(np, "adi,nexcb_en");
+
+	return pdata;
+}
+#else
+static struct ad7746_platform_data *ad7746_parse_dt(struct device *dev)
+{
+	return NULL;
+}
+#endif
+
+static int ad7746_probe(struct i2c_client *client,
+			const struct i2c_device_id *id)
+{
+	struct ad7746_platform_data *pdata = client->dev.platform_data;
+	struct ad7746_chip_info *chip;
+	struct iio_dev *indio_dev;
+	unsigned char regval = 0;
+	int ret = 0;
+
+	if (client->dev.of_node)
+		pdata = ad7746_parse_dt(&client->dev);
+	else
+		pdata = client->dev.platform_data;
+
+	indio_dev = devm_iio_device_alloc(&client->dev, sizeof(*chip));
+	if (!indio_dev)
+		return -ENOMEM;
+	chip = iio_priv(indio_dev);
+	mutex_init(&chip->lock);
+	/* this is only used for device removal purposes */
+	i2c_set_clientdata(client, indio_dev);
+
+	chip->client = client;
+	chip->capdac_set = -1;
+
+	/* Establish that the iio_dev is a child of the i2c device */
+	indio_dev->name = id->name;
+	indio_dev->dev.parent = &client->dev;
+	indio_dev->info = &ad7746_info;
+	indio_dev->channels = ad7746_channels;
+	if (id->driver_data == 7746)
+		indio_dev->num_channels = ARRAY_SIZE(ad7746_channels);
+	else
+		indio_dev->num_channels =  ARRAY_SIZE(ad7746_channels) - 2;
+	indio_dev->num_channels = ARRAY_SIZE(ad7746_channels);
+	indio_dev->modes = INDIO_DIRECT_MODE;
+
+	if (pdata) {
+		if (pdata->exca_en) {
+			if (pdata->exca_inv_en)
+				regval |= AD7746_EXCSETUP_NEXCA;
+			else
+				regval |= AD7746_EXCSETUP_EXCA;
+		}
+
+		if (pdata->excb_en) {
+			if (pdata->excb_inv_en)
+				regval |= AD7746_EXCSETUP_NEXCB;
+			else
+				regval |= AD7746_EXCSETUP_EXCB;
+		}
+
+		regval |= AD7746_EXCSETUP_EXCLVL(pdata->exclvl);
+	} else {
+		dev_warn(&client->dev, "No platform data? using default\n");
+		regval = AD7746_EXCSETUP_EXCA | AD7746_EXCSETUP_EXCB |
+			AD7746_EXCSETUP_EXCLVL(3);
+	}
+
+	ret = i2c_smbus_write_byte_data(chip->client,
+					AD7746_REG_EXC_SETUP, regval);
+	if (ret < 0)
+		return ret;
+
+	ret = devm_iio_device_register(indio_dev->dev.parent, indio_dev);
+	if (ret)
+		return ret;
+
+	return 0;
+}
+
+static int ad7746_remove(struct i2c_client *client)
+{
+	struct iio_dev *indio_dev = i2c_get_clientdata(client);
+	struct ad7746_chip_info *chip = iio_priv(indio_dev);
+	unsigned char regval;
+	int ret;
+
+	mutex_lock(&chip->lock);
+
+	regval = chip->config | AD7746_CONF_MODE_PWRDN;
+	ret = i2c_smbus_write_byte_data(chip->client, AD7746_REG_CFG, regval);
+
+	mutex_unlock(&chip->lock);
+
+	if (ret < 0) {
+		dev_warn(&client->dev, "Could NOT Power Down!\n");
+		goto out;
+	}
+
+	iio_device_unregister(indio_dev);
+
+out:
+	return ret;
+}
+
+static const struct i2c_device_id ad7746_id[] = {
+	{ "ad7745", 7745 },
+	{ "ad7746", 7746 },
+	{ "ad7747", 7747 },
+	{}
+};
+MODULE_DEVICE_TABLE(i2c, ad7746_id);
+
+#ifdef CONFIG_OF
+static const struct of_device_id ad7746_of_match[] = {
+	{ .compatible = "adi,ad7745" },
+	{ .compatible = "adi,ad7746" },
+	{ .compatible = "adi,ad7747" },
+	{ }
+};
+MODULE_DEVICE_TABLE(of, ad7746_of_match);
+#endif
+
+static struct i2c_driver ad7746_driver = {
+	.driver = {
+		.name = KBUILD_MODNAME,
+		.of_match_table = of_match_ptr(ad7746_of_match),
+	},
+	.probe = ad7746_probe,
+	.remove = ad7746_remove,
+	.id_table = ad7746_id,
+};
+module_i2c_driver(ad7746_driver);
+
+MODULE_AUTHOR("Michael Hennerich <hennerich@...ckfin.uclinux.org>");
+MODULE_DESCRIPTION("Analog Devices AD7746/5/7 capacitive sensor driver");
+MODULE_LICENSE("GPL v2");
diff --git a/include/linux/iio/cdc/ad7746.h b/include/linux/iio/cdc/ad7746.h
new file mode 100644
index 0000000..46ff25e
--- /dev/null
+++ b/include/linux/iio/cdc/ad7746.h
@@ -0,0 +1,20 @@
+/*
+ * AD7746 capacitive sensor driver supporting AD7745, AD7746 and AD7747
+ *
+ * Copyright 2011 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2.
+ */
+
+#ifndef IIO_CDC_AD7746_H_
+#define IIO_CDC_AD7746_H_
+
+struct ad7746_platform_data {
+	unsigned char exclvl;	/*Excitation Voltage Level */
+	bool exca_en;		/* enables EXCA pin as the excitation output */
+	bool exca_inv_en;	/* enables /EXCA pin as the excitation output */
+	bool excb_en;		/* enables EXCB pin as the excitation output */
+	bool excb_inv_en;	/* enables /EXCB pin as the excitation output */
+};
+
+#endif /* IIO_CDC_AD7746_H_ */
-- 
2.7.4

Powered by blists - more mailing lists