Message-Id: <1523637411-8531-15-git-send-email-hernan@vanguardiasur.com.ar>
Date:   Fri, 13 Apr 2018 13:36:51 -0300
From:   Hernán Gonzalez <hernan@...guardiasur.com.ar>
To:     jic23@...nel.org, knaack.h@....de, lars@...afoo.de,
        pmeerw@...erw.net, gregkh@...uxfoundation.org,
        Michael.Hennerich@...log.com, linux-iio@...r.kernel.org,
        linux-kernel@...r.kernel.org
Cc:     Hernán Gonzalez <hernan@...guardiasur.com.ar>
Subject: [PATCH v2 14/14] staging: iio: Remove ad7746 from staging

Signed-off-by: Hernán Gonzalez <hernan@...guardiasur.com.ar>
---
 .../devicetree/bindings/staging/iio/cdc/ad7746.txt |  34 -
 drivers/staging/iio/cdc/Kconfig                    |  10 -
 drivers/staging/iio/cdc/Makefile                   |   1 -
 drivers/staging/iio/cdc/ad7746.c                   | 856 ---------------------
 drivers/staging/iio/cdc/ad7746.h                   |  24 -
 5 files changed, 925 deletions(-)
 delete mode 100644 Documentation/devicetree/bindings/staging/iio/cdc/ad7746.txt
 delete mode 100644 drivers/staging/iio/cdc/ad7746.c
 delete mode 100644 drivers/staging/iio/cdc/ad7746.h

diff --git a/Documentation/devicetree/bindings/staging/iio/cdc/ad7746.txt b/Documentation/devicetree/bindings/staging/iio/cdc/ad7746.txt
deleted file mode 100644
index 7740f05..0000000
--- a/Documentation/devicetree/bindings/staging/iio/cdc/ad7746.txt
+++ /dev/null
@@ -1,34 +0,0 @@
-Analog Devices AD7746/5/7 capacitive sensor driver
-
-Required properties:
-	- compatible: Should be one of
-		* "adi,ad7745"
-		* "adi,ad7746"
-	  * "adi,ad7747"
-	- reg: The 7-bits long I2c address of the device
-
-Optional properties:
-	- adi,exclvl: This property defines the excitation voltage level for the
-    capacitance to be measured. Possible values are:
-      * 0 = +-VDD/8
-      * 1 = +-VDD/4
-      * 2 = +-VDD * 3/8
-      * 3 = +-VDD/2 (Default)
-	- adi,nexca_en: Invert excitation output A.
-	- adi,nexcb_en:	Invert excitation output B.
-
-Example:
-Here exclvl would be 1 (VDD/4), Excitation pin A would be inverted and
-Excitation pin B would NOT be inverted.
-
-i2c2 {
-
-      < . . . >
-
-      ad7746: ad7746@60 {
-              compatible = "ad7746";
-              reg = <0x60>;
-              adi,exclvl = <1>;
-              adi,nexca_en;
-      };
-};
diff --git a/drivers/staging/iio/cdc/Kconfig b/drivers/staging/iio/cdc/Kconfig
index 80211df..a170ab3 100644
--- a/drivers/staging/iio/cdc/Kconfig
+++ b/drivers/staging/iio/cdc/Kconfig
@@ -23,14 +23,4 @@ config AD7152
 	  To compile this driver as a module, choose M here: the
 	  module will be called ad7152.
 
-config AD7746
-	tristate "Analog Devices AD7745, AD7746 AD7747 capacitive sensor driver"
-	depends on I2C
-	help
-	  Say yes here to build support for Analog Devices capacitive sensors.
-	  (AD7745, AD7746, AD7747) Provides direct access via sysfs.
-
-	  To compile this driver as a module, choose M here: the
-	  module will be called ad7746.
-
 endmenu
diff --git a/drivers/staging/iio/cdc/Makefile b/drivers/staging/iio/cdc/Makefile
index a5fbabf..5db1acd 100644
--- a/drivers/staging/iio/cdc/Makefile
+++ b/drivers/staging/iio/cdc/Makefile
@@ -4,4 +4,3 @@
 
 obj-$(CONFIG_AD7150) += ad7150.o
 obj-$(CONFIG_AD7152) += ad7152.o
-obj-$(CONFIG_AD7746) += ad7746.o
diff --git a/drivers/staging/iio/cdc/ad7746.c b/drivers/staging/iio/cdc/ad7746.c
deleted file mode 100644
index ef0ebb5..0000000
--- a/drivers/staging/iio/cdc/ad7746.c
+++ /dev/null
@@ -1,856 +0,0 @@
-/*
- * AD7746 capacitive sensor driver supporting AD7745, AD7746 and AD7747
- *
- * Copyright 2011 Analog Devices Inc.
- *
- * Licensed under the GPL-2.
- */
-
-#include <linux/delay.h>
-#include <linux/device.h>
-#include <linux/i2c.h>
-#include <linux/interrupt.h>
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/slab.h>
-#include <linux/stat.h>
-#include <linux/sysfs.h>
-
-#include <linux/iio/iio.h>
-#include <linux/iio/sysfs.h>
-
-#include "ad7746.h"
-
-/*
- * AD7746 Register Definition
- */
-
-#define AD7746_REG_CAP_DATA_HIGH	1
-#define AD7746_REG_VT_DATA_HIGH		4
-#define AD7746_REG_CAP_SETUP		7
-#define AD7746_REG_VT_SETUP		8
-#define AD7746_REG_EXC_SETUP		9
-#define AD7746_REG_CFG			10
-#define AD7746_REG_CAPDACA		11
-#define AD7746_REG_CAPDACB		12
-#define AD7746_REG_CAP_OFFH		13
-#define AD7746_REG_CAP_GAINH		15
-#define AD7746_REG_VOLT_GAINH		17
-
-/* Capacitive Channel Setup Register Bit Designations (AD7746_REG_CAP_SETUP) */
-#define AD7746_CAPSETUP_CAPEN		BIT(7)
-#define AD7746_CAPSETUP_CIN2		BIT(6) /* AD7746 only */
-#define AD7746_CAPSETUP_CAPDIFF		BIT(5)
-#define AD7746_CAPSETUP_CACHOP		BIT(0)
-
-/* Voltage/Temperature Setup Register Bit Designations (AD7746_REG_VT_SETUP) */
-#define AD7746_VTSETUP_VTEN		(1 << 7)
-#define AD7746_VTSETUP_VTMD_INT_TEMP	(0 << 5)
-#define AD7746_VTSETUP_VTMD_EXT_TEMP	(1 << 5)
-#define AD7746_VTSETUP_VTMD_VDD_MON	(2 << 5)
-#define AD7746_VTSETUP_VTMD_EXT_VIN	(3 << 5)
-#define AD7746_VTSETUP_EXTREF		BIT(4)
-#define AD7746_VTSETUP_VTSHORT		BIT(1)
-#define AD7746_VTSETUP_VTCHOP		BIT(0)
-
-/* Excitation Setup Register Bit Designations (AD7746_REG_EXC_SETUP) */
-#define AD7746_EXCSETUP_CLKCTRL		BIT(7)
-#define AD7746_EXCSETUP_EXCON		BIT(6)
-#define AD7746_EXCSETUP_EXCB		BIT(5)
-#define AD7746_EXCSETUP_NEXCB		BIT(4)
-#define AD7746_EXCSETUP_EXCA		BIT(3)
-#define AD7746_EXCSETUP_NEXCA		BIT(2)
-#define AD7746_EXCSETUP_EXCLVL(x)	(((x) & 0x3) << 0)
-
-/* Config Register Bit Designations (AD7746_REG_CFG) */
-#define AD7746_CONF_VTFS_SHIFT		6
-#define AD7746_CONF_CAPFS_SHIFT		3
-#define AD7746_CONF_VTFS_MASK		GENMASK(7, 6)
-#define AD7746_CONF_CAPFS_MASK		GENMASK(5, 3)
-#define AD7746_CONF_MODE_IDLE		(0 << 0)
-#define AD7746_CONF_MODE_CONT_CONV	(1 << 0)
-#define AD7746_CONF_MODE_SINGLE_CONV	(2 << 0)
-#define AD7746_CONF_MODE_PWRDN		(3 << 0)
-#define AD7746_CONF_MODE_OFFS_CAL	(5 << 0)
-#define AD7746_CONF_MODE_GAIN_CAL	(6 << 0)
-
-/* CAPDAC Register Bit Designations (AD7746_REG_CAPDACx) */
-#define AD7746_CAPDAC_DACEN		BIT(7)
-#define AD7746_CAPDAC_DACP(x)		((x) & 0x7F)
-
-/*
- * struct ad7746_chip_info - chip specific information
- */
-
-struct ad7746_chip_info {
-	struct i2c_client *client;
-	struct mutex lock; /* protect sensor state */
-	/*
-	 * Capacitive channel digital filter setup;
-	 * conversion time/update rate setup per channel
-	 */
-	u8	config;
-	u8	cap_setup;
-	u8	vt_setup;
-	u8	capdac[2][2];
-	s8	capdac_set;
-
-	union {
-		__be32 d32;
-		u8 d8[4];
-	} data ____cacheline_aligned;
-};
-
-enum ad7746_chan {
-	VIN,
-	VIN_VDD,
-	TEMP_INT,
-	TEMP_EXT,
-	CIN1,
-	CIN1_DIFF,
-	CIN2,
-	CIN2_DIFF,
-};
-
-static const struct iio_chan_spec ad7746_channels[] = {
-	[VIN] = {
-		.type = IIO_VOLTAGE,
-		.indexed = 1,
-		.channel = 0,
-		.info_mask_separate = BIT(IIO_CHAN_INFO_RAW),
-		.info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE) |
-			BIT(IIO_CHAN_INFO_SAMP_FREQ),
-		.address = AD7746_REG_VT_DATA_HIGH << 8 |
-			AD7746_VTSETUP_VTMD_EXT_VIN,
-	},
-	[VIN_VDD] = {
-		.type = IIO_VOLTAGE,
-		.indexed = 1,
-		.channel = 1,
-		.extend_name = "supply",
-		.info_mask_separate = BIT(IIO_CHAN_INFO_RAW),
-		.info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE) |
-			BIT(IIO_CHAN_INFO_SAMP_FREQ),
-		.address = AD7746_REG_VT_DATA_HIGH << 8 |
-			AD7746_VTSETUP_VTMD_VDD_MON,
-	},
-	[TEMP_INT] = {
-		.type = IIO_TEMP,
-		.indexed = 1,
-		.channel = 0,
-		.info_mask_separate = BIT(IIO_CHAN_INFO_PROCESSED),
-		.address = AD7746_REG_VT_DATA_HIGH << 8 |
-			AD7746_VTSETUP_VTMD_INT_TEMP,
-	},
-	[TEMP_EXT] = {
-		.type = IIO_TEMP,
-		.indexed = 1,
-		.channel = 1,
-		.info_mask_separate = BIT(IIO_CHAN_INFO_PROCESSED),
-		.address = AD7746_REG_VT_DATA_HIGH << 8 |
-			AD7746_VTSETUP_VTMD_EXT_TEMP,
-	},
-	[CIN1] = {
-		.type = IIO_CAPACITANCE,
-		.indexed = 1,
-		.channel = 0,
-		.info_mask_separate = BIT(IIO_CHAN_INFO_RAW) |
-		BIT(IIO_CHAN_INFO_CALIBSCALE) | BIT(IIO_CHAN_INFO_OFFSET),
-		.info_mask_shared_by_type = BIT(IIO_CHAN_INFO_CALIBBIAS) |
-		BIT(IIO_CHAN_INFO_SCALE) | BIT(IIO_CHAN_INFO_SAMP_FREQ),
-		.address = AD7746_REG_CAP_DATA_HIGH << 8,
-	},
-	[CIN1_DIFF] = {
-		.type = IIO_CAPACITANCE,
-		.differential = 1,
-		.indexed = 1,
-		.channel = 0,
-		.channel2 = 2,
-		.info_mask_separate = BIT(IIO_CHAN_INFO_RAW) |
-		BIT(IIO_CHAN_INFO_CALIBSCALE) | BIT(IIO_CHAN_INFO_OFFSET),
-		.info_mask_shared_by_type = BIT(IIO_CHAN_INFO_CALIBBIAS) |
-		BIT(IIO_CHAN_INFO_SCALE) | BIT(IIO_CHAN_INFO_SAMP_FREQ),
-		.address = AD7746_REG_CAP_DATA_HIGH << 8 |
-			AD7746_CAPSETUP_CAPDIFF
-	},
-	[CIN2] = {
-		.type = IIO_CAPACITANCE,
-		.indexed = 1,
-		.channel = 1,
-		.info_mask_separate = BIT(IIO_CHAN_INFO_RAW) |
-		BIT(IIO_CHAN_INFO_CALIBSCALE) | BIT(IIO_CHAN_INFO_OFFSET),
-		.info_mask_shared_by_type = BIT(IIO_CHAN_INFO_CALIBBIAS) |
-		BIT(IIO_CHAN_INFO_SCALE) | BIT(IIO_CHAN_INFO_SAMP_FREQ),
-		.address = AD7746_REG_CAP_DATA_HIGH << 8 |
-			AD7746_CAPSETUP_CIN2,
-	},
-	[CIN2_DIFF] = {
-		.type = IIO_CAPACITANCE,
-		.differential = 1,
-		.indexed = 1,
-		.channel = 1,
-		.channel2 = 3,
-		.info_mask_separate = BIT(IIO_CHAN_INFO_RAW) |
-		BIT(IIO_CHAN_INFO_CALIBSCALE) | BIT(IIO_CHAN_INFO_OFFSET),
-		.info_mask_shared_by_type = BIT(IIO_CHAN_INFO_CALIBBIAS) |
-		BIT(IIO_CHAN_INFO_SCALE) | BIT(IIO_CHAN_INFO_SAMP_FREQ),
-		.address = AD7746_REG_CAP_DATA_HIGH << 8 |
-			AD7746_CAPSETUP_CAPDIFF | AD7746_CAPSETUP_CIN2,
-	}
-};
-
-/* Values are Update Rate (Hz), Conversion Time (ms) + 1*/
-static const unsigned char ad7746_vt_filter_rate_table[][2] = {
-	{50, 20 + 1}, {31, 32 + 1}, {16, 62 + 1}, {8, 122 + 1},
-};
-
-static const unsigned char ad7746_cap_filter_rate_table[][2] = {
-	{91, 11 + 1}, {84, 12 + 1}, {50, 20 + 1}, {26, 38 + 1},
-	{16, 62 + 1}, {13, 77 + 1}, {11, 92 + 1}, {9, 110 + 1},
-};
-
-static int ad7746_select_channel(struct iio_dev *indio_dev,
-				 struct iio_chan_spec const *chan)
-{
-	struct ad7746_chip_info *chip = iio_priv(indio_dev);
-	u8 vt_setup, cap_setup;
-	int ret, delay, idx;
-
-	switch (chan->type) {
-	case IIO_CAPACITANCE:
-		cap_setup = (chan->address & 0xFF) | AD7746_CAPSETUP_CAPEN;
-		vt_setup = chip->vt_setup & ~AD7746_VTSETUP_VTEN;
-		idx = (chip->config & AD7746_CONF_CAPFS_MASK) >>
-			AD7746_CONF_CAPFS_SHIFT;
-		delay = ad7746_cap_filter_rate_table[idx][1];
-
-		if (chip->capdac_set != chan->channel) {
-			ret = i2c_smbus_write_byte_data(chip->client,
-				AD7746_REG_CAPDACA,
-				chip->capdac[chan->channel][0]);
-			if (ret < 0)
-				return ret;
-			ret = i2c_smbus_write_byte_data(chip->client,
-				AD7746_REG_CAPDACB,
-				chip->capdac[chan->channel][1]);
-			if (ret < 0)
-				return ret;
-
-			chip->capdac_set = chan->channel;
-		}
-		break;
-	case IIO_VOLTAGE:
-	case IIO_TEMP:
-		vt_setup = (chan->address & 0xFF) | AD7746_VTSETUP_VTEN;
-		cap_setup = chip->cap_setup & ~AD7746_CAPSETUP_CAPEN;
-		idx = (chip->config & AD7746_CONF_VTFS_MASK) >>
-			AD7746_CONF_VTFS_SHIFT;
-		delay = ad7746_cap_filter_rate_table[idx][1];
-		break;
-	default:
-		return -EINVAL;
-	}
-
-	if (chip->cap_setup != cap_setup) {
-		ret = i2c_smbus_write_byte_data(chip->client,
-						AD7746_REG_CAP_SETUP,
-						cap_setup);
-		if (ret < 0)
-			return ret;
-
-		chip->cap_setup = cap_setup;
-	}
-
-	if (chip->vt_setup != vt_setup) {
-		ret = i2c_smbus_write_byte_data(chip->client,
-						AD7746_REG_VT_SETUP,
-						vt_setup);
-		if (ret < 0)
-			return ret;
-
-		chip->vt_setup = vt_setup;
-	}
-
-	return delay;
-}
-
-static inline ssize_t ad7746_start_calib(struct device *dev,
-					 struct device_attribute *attr,
-					 const char *buf,
-					 size_t len,
-					 u8 regval)
-{
-	struct iio_dev *indio_dev = dev_to_iio_dev(dev);
-	struct ad7746_chip_info *chip = iio_priv(indio_dev);
-	int ret, timeout = 10;
-	bool doit;
-
-	ret = strtobool(buf, &doit);
-	if (ret < 0)
-		return ret;
-
-	if (!doit)
-		return 0;
-
-	mutex_lock(&chip->lock);
-	regval |= chip->config;
-	ret = i2c_smbus_write_byte_data(chip->client, AD7746_REG_CFG, regval);
-	if (ret < 0)
-		goto unlock;
-
-	do {
-		msleep(20);
-		ret = i2c_smbus_read_byte_data(chip->client, AD7746_REG_CFG);
-		if (ret < 0)
-			goto unlock;
-
-	} while ((ret == regval) && timeout--);
-
-	mutex_unlock(&chip->lock);
-
-	return len;
-
-unlock:
-	mutex_unlock(&chip->lock);
-	return ret;
-}
-
-static ssize_t ad7746_start_offset_calib(struct device *dev,
-					 struct device_attribute *attr,
-					 const char *buf,
-					 size_t len)
-{
-	struct iio_dev *indio_dev = dev_to_iio_dev(dev);
-	int ret = ad7746_select_channel(indio_dev,
-			      &ad7746_channels[to_iio_dev_attr(attr)->address]);
-	if (ret < 0)
-		return ret;
-
-	return ad7746_start_calib(dev, attr, buf, len,
-				  AD7746_CONF_MODE_OFFS_CAL);
-}
-
-static ssize_t ad7746_start_gain_calib(struct device *dev,
-				       struct device_attribute *attr,
-				       const char *buf,
-				       size_t len)
-{
-	struct iio_dev *indio_dev = dev_to_iio_dev(dev);
-	int ret = ad7746_select_channel(indio_dev,
-			      &ad7746_channels[to_iio_dev_attr(attr)->address]);
-	if (ret < 0)
-		return ret;
-
-	return ad7746_start_calib(dev, attr, buf, len,
-				  AD7746_CONF_MODE_GAIN_CAL);
-}
-
-static IIO_DEVICE_ATTR(in_capacitance0_calibbias_calibration,
-		       0200, NULL, ad7746_start_offset_calib, CIN1);
-static IIO_DEVICE_ATTR(in_capacitance1_calibbias_calibration,
-		       0200, NULL, ad7746_start_offset_calib, CIN2);
-static IIO_DEVICE_ATTR(in_capacitance0_calibscale_calibration,
-		       0200, NULL, ad7746_start_gain_calib, CIN1);
-static IIO_DEVICE_ATTR(in_capacitance1_calibscale_calibration,
-		       0200, NULL, ad7746_start_gain_calib, CIN2);
-static IIO_DEVICE_ATTR(in_voltage0_calibscale_calibration,
-		       0200, NULL, ad7746_start_gain_calib, VIN);
-
-static int ad7746_store_cap_filter_rate_setup(struct ad7746_chip_info *chip,
-					      int val)
-{
-	int i;
-
-	for (i = 0; i < ARRAY_SIZE(ad7746_cap_filter_rate_table); i++)
-		if (val >= ad7746_cap_filter_rate_table[i][0])
-			break;
-
-	if (i >= ARRAY_SIZE(ad7746_cap_filter_rate_table))
-		i = ARRAY_SIZE(ad7746_cap_filter_rate_table) - 1;
-
-	chip->config &= ~AD7746_CONF_CAPFS_MASK;
-	chip->config |= i << AD7746_CONF_CAPFS_SHIFT;
-
-	return 0;
-}
-
-static int ad7746_store_vt_filter_rate_setup(struct ad7746_chip_info *chip,
-					     int val)
-{
-	int i;
-
-	for (i = 0; i < ARRAY_SIZE(ad7746_vt_filter_rate_table); i++)
-		if (val >= ad7746_vt_filter_rate_table[i][0])
-			break;
-
-	if (i >= ARRAY_SIZE(ad7746_vt_filter_rate_table))
-		i = ARRAY_SIZE(ad7746_vt_filter_rate_table) - 1;
-
-	chip->config &= ~AD7746_CONF_VTFS_MASK;
-	chip->config |= i << AD7746_CONF_VTFS_SHIFT;
-
-	return 0;
-}
-
-static IIO_CONST_ATTR(in_voltage_sampling_frequency_available, "50 31 16 8");
-static IIO_CONST_ATTR(in_capacitance_sampling_frequency_available,
-		       "91 84 50 26 16 13 11 9");
-
-static struct attribute *ad7746_attributes[] = {
-	&iio_dev_attr_in_capacitance0_calibbias_calibration.dev_attr.attr,
-	&iio_dev_attr_in_capacitance0_calibscale_calibration.dev_attr.attr,
-	&iio_dev_attr_in_capacitance1_calibscale_calibration.dev_attr.attr,
-	&iio_dev_attr_in_capacitance1_calibbias_calibration.dev_attr.attr,
-	&iio_dev_attr_in_voltage0_calibscale_calibration.dev_attr.attr,
-	&iio_const_attr_in_voltage_sampling_frequency_available.dev_attr.attr,
-	&iio_const_attr_in_capacitance_sampling_frequency_available.dev_attr.attr,
-	NULL,
-};
-
-static const struct attribute_group ad7746_attribute_group = {
-	.attrs = ad7746_attributes,
-};
-
-static int ad7746_write_raw(struct iio_dev *indio_dev,
-			    struct iio_chan_spec const *chan,
-			    int val,
-			    int val2,
-			    long mask)
-{
-	struct ad7746_chip_info *chip = iio_priv(indio_dev);
-	int ret, reg;
-
-	mutex_lock(&chip->lock);
-
-	switch (mask) {
-	case IIO_CHAN_INFO_CALIBSCALE:
-		if (val != 1) {
-			ret = -EINVAL;
-			goto out;
-		}
-
-		/* 2^16 in micro */
-		val = (val2 * 1024) / 15625;
-
-		switch (chan->type) {
-		case IIO_CAPACITANCE:
-			reg = AD7746_REG_CAP_GAINH;
-			break;
-		case IIO_VOLTAGE:
-			reg = AD7746_REG_VOLT_GAINH;
-			break;
-		default:
-			ret = -EINVAL;
-			goto out;
-		}
-
-		ret = i2c_smbus_write_word_swapped(chip->client, reg, val);
-		if (ret < 0)
-			goto out;
-
-		ret = 0;
-		break;
-	case IIO_CHAN_INFO_CALIBBIAS:
-		if (val < 0 || val > 0xFFFF) {
-			ret = -EINVAL;
-			goto out;
-		}
-		ret = i2c_smbus_write_word_swapped(chip->client,
-						   AD7746_REG_CAP_OFFH, val);
-		if (ret < 0)
-			goto out;
-
-		ret = 0;
-		break;
-	case IIO_CHAN_INFO_OFFSET:
-		if (val < 0 || val > 43008000) { /* 21pF */
-			ret = -EINVAL;
-			goto out;
-		}
-
-		/*
-		 * CAPDAC Scale = 21pF_typ / 127
-		 * CIN Scale = 8.192pF / 2^24
-		 * Offset Scale = CAPDAC Scale / CIN Scale = 338646
-		 */
-
-		val /= 338646;
-
-		chip->capdac[chan->channel][chan->differential] = val > 0 ?
-			AD7746_CAPDAC_DACP(val) | AD7746_CAPDAC_DACEN : 0;
-
-		ret = i2c_smbus_write_byte_data(chip->client,
-						AD7746_REG_CAPDACA,
-						chip->capdac[chan->channel][0]);
-		if (ret < 0)
-			goto out;
-		ret = i2c_smbus_write_byte_data(chip->client,
-						AD7746_REG_CAPDACB,
-						chip->capdac[chan->channel][1]);
-		if (ret < 0)
-			goto out;
-
-		chip->capdac_set = chan->channel;
-
-		ret = 0;
-		break;
-	case IIO_CHAN_INFO_SAMP_FREQ:
-		if (val2) {
-			ret = -EINVAL;
-			goto out;
-		}
-
-		switch (chan->type) {
-		case IIO_CAPACITANCE:
-			ret = ad7746_store_cap_filter_rate_setup(chip, val);
-			break;
-		case IIO_VOLTAGE:
-			ret = ad7746_store_vt_filter_rate_setup(chip, val);
-			break;
-		default:
-			ret = -EINVAL;
-		}
-		break;
-	default:
-		ret = -EINVAL;
-	}
-
-out:
-	mutex_unlock(&chip->lock);
-	return ret;
-}
-
-static int ad7746_read_raw(struct iio_dev *indio_dev,
-			   struct iio_chan_spec const *chan,
-			   int *val, int *val2,
-			   long mask)
-{
-	struct ad7746_chip_info *chip = iio_priv(indio_dev);
-	int ret, delay, idx;
-	u8 regval, reg;
-
-	mutex_lock(&chip->lock);
-
-	switch (mask) {
-	case IIO_CHAN_INFO_RAW:
-	case IIO_CHAN_INFO_PROCESSED:
-		ret = ad7746_select_channel(indio_dev, chan);
-		if (ret < 0)
-			goto out;
-		delay = ret;
-
-		regval = chip->config | AD7746_CONF_MODE_SINGLE_CONV;
-		ret = i2c_smbus_write_byte_data(chip->client, AD7746_REG_CFG,
-						regval);
-		if (ret < 0)
-			goto out;
-
-		msleep(delay);
-		/* Now read the actual register */
-
-		ret = i2c_smbus_read_i2c_block_data(chip->client,
-						    chan->address >> 8, 3,
-						    &chip->data.d8[1]);
-
-		if (ret < 0)
-			goto out;
-
-		/*
-		 * Either for Capacitance, Voltage or Temperature,
-		 * the 0x000000 code represents negative full scale,
-		 * the 0x800000 code represents zero scale, and
-		 * the 0xFFFFFF code represents positive full scale.
-		 */
-
-		*val = (be32_to_cpu(chip->data.d32) & 0xFFFFFF) - 0x800000;
-
-		switch (chan->type) {
-		case IIO_TEMP:
-		/*
-		 * temperature in milli degrees Celsius
-		 * T = ((*val / 2048) - 4096) * 1000
-		 */
-			*val = (*val * 125) / 256;
-			break;
-		case IIO_VOLTAGE:
-
-			/*
-			 * The voltage from the VDD pin is internally
-			 * attenuated by 6.
-			 */
-
-			if (chan->channel == 1) /* supply_raw */
-				*val = *val * 6;
-			break;
-		default:
-			break;
-		}
-
-		ret = IIO_VAL_INT;
-		break;
-	case IIO_CHAN_INFO_CALIBSCALE:
-		switch (chan->type) {
-		case IIO_CAPACITANCE:
-			reg = AD7746_REG_CAP_GAINH;
-			break;
-		case IIO_VOLTAGE:
-			reg = AD7746_REG_VOLT_GAINH;
-			break;
-		default:
-			ret = -EINVAL;
-			goto out;
-		}
-
-		ret = i2c_smbus_read_word_swapped(chip->client, reg);
-		if (ret < 0)
-			goto out;
-		/* 1 + gain_val / 2^16 */
-		*val = 1;
-		*val2 = (15625 * ret) / 1024;
-
-		ret = IIO_VAL_INT_PLUS_MICRO;
-		break;
-	case IIO_CHAN_INFO_CALIBBIAS:
-		ret = i2c_smbus_read_word_swapped(chip->client,
-						  AD7746_REG_CAP_OFFH);
-		if (ret < 0)
-			goto out;
-		*val = ret;
-
-		ret = IIO_VAL_INT;
-		break;
-	case IIO_CHAN_INFO_OFFSET:
-
-		/*
-		 * CAPDAC Scale = 21pF_typ / 127
-		 * CIN Scale = 8.192pF / 2^24
-		 * Offset Scale = CAPDAC Scale / CIN Scale = 338646
-		 */
-
-		*val = AD7746_CAPDAC_DACP(chip->capdac[chan->channel]
-					  [chan->differential]) * 338646;
-
-		ret = IIO_VAL_INT;
-		break;
-	case IIO_CHAN_INFO_SCALE:
-		switch (chan->type) {
-		case IIO_CAPACITANCE:
-			/* CIN Scale: 8.192pf / 2^24 */
-			*val =  0;
-			*val2 = 488;
-			ret = IIO_VAL_INT_PLUS_NANO;
-			break;
-		case IIO_VOLTAGE:
-			/* VIN Scale: 1170mV / 2^23 */
-			*val = 1170;
-			*val2 = 23;
-			ret = IIO_VAL_FRACTIONAL_LOG2;
-			break;
-		default:
-			ret = -EINVAL;
-			break;
-		}
-
-		break;
-	case IIO_CHAN_INFO_SAMP_FREQ:
-		switch (chan->type) {
-		case IIO_CAPACITANCE:
-			idx = (chip->config & AD7746_CONF_CAPFS_MASK) >>
-				AD7746_CONF_CAPFS_SHIFT;
-			*val = ad7746_cap_filter_rate_table[idx][0];
-			ret = IIO_VAL_INT;
-			break;
-		case IIO_VOLTAGE:
-			idx = (chip->config & AD7746_CONF_VTFS_MASK) >>
-				AD7746_CONF_VTFS_SHIFT;
-			*val = ad7746_vt_filter_rate_table[idx][0];
-			ret = IIO_VAL_INT;
-			break;
-		default:
-			ret = -EINVAL;
-		}
-		break;
-	default:
-		ret = -EINVAL;
-	}
-out:
-	mutex_unlock(&chip->lock);
-	return ret;
-}
-
-static const struct iio_info ad7746_info = {
-	.attrs = &ad7746_attribute_group,
-	.read_raw = ad7746_read_raw,
-	.write_raw = ad7746_write_raw,
-};
-
-/*
- * device probe and remove
- */
-#ifdef CONFIG_OF
-static struct ad7746_platform_data *ad7746_parse_dt(struct device *dev)
-{
-	struct device_node *np = dev->of_node;
-	struct ad7746_platform_data *pdata;
-	unsigned int tmp;
-	int ret;
-
-	/*
-	 * The default excitation outputs are not inverted, it should be stated
-	 * in the dt if needed.
-	 */
-
-	pdata = devm_kzalloc(dev, sizeof(*pdata), GFP_KERNEL);
-	if (!pdata)
-		return NULL;
-
-	ret = of_property_read_u32(np, "adi,exclvl", &tmp);
-	if (ret || tmp > 3) {
-		dev_warn(dev, "Wrong exclvl value, using default\n");
-		pdata->exclvl = 3;
-	} else {
-		pdata->exclvl = tmp;
-	}
-
-	pdata->exca_en = true;
-	pdata->excb_en = true;
-	pdata->exca_inv_en = of_property_read_bool(np, "adi,nexca_en");
-	pdata->excb_inv_en = of_property_read_bool(np, "adi,nexcb_en");
-
-	return pdata;
-}
-#else
-static struct ad7746_platform_data *ad7746_parse_dt(struct device *dev)
-{
-	return NULL;
-}
-#endif
-
-static int ad7746_probe(struct i2c_client *client,
-			const struct i2c_device_id *id)
-{
-	struct ad7746_platform_data *pdata = client->dev.platform_data;
-	struct ad7746_chip_info *chip;
-	struct iio_dev *indio_dev;
-	unsigned char regval = 0;
-	int ret = 0;
-
-	if (client->dev.of_node)
-		pdata = ad7746_parse_dt(&client->dev);
-	else
-		pdata = client->dev.platform_data;
-
-	indio_dev = devm_iio_device_alloc(&client->dev, sizeof(*chip));
-	if (!indio_dev)
-		return -ENOMEM;
-	chip = iio_priv(indio_dev);
-	mutex_init(&chip->lock);
-	/* this is only used for device removal purposes */
-	i2c_set_clientdata(client, indio_dev);
-
-	chip->client = client;
-	chip->capdac_set = -1;
-
-	/* Establish that the iio_dev is a child of the i2c device */
-	indio_dev->name = id->name;
-	indio_dev->dev.parent = &client->dev;
-	indio_dev->info = &ad7746_info;
-	indio_dev->channels = ad7746_channels;
-	if (id->driver_data == 7746)
-		indio_dev->num_channels = ARRAY_SIZE(ad7746_channels);
-	else
-		indio_dev->num_channels =  ARRAY_SIZE(ad7746_channels) - 2;
-	indio_dev->num_channels = ARRAY_SIZE(ad7746_channels);
-	indio_dev->modes = INDIO_DIRECT_MODE;
-
-	if (pdata) {
-		if (pdata->exca_en) {
-			if (pdata->exca_inv_en)
-				regval |= AD7746_EXCSETUP_NEXCA;
-			else
-				regval |= AD7746_EXCSETUP_EXCA;
-		}
-
-		if (pdata->excb_en) {
-			if (pdata->excb_inv_en)
-				regval |= AD7746_EXCSETUP_NEXCB;
-			else
-				regval |= AD7746_EXCSETUP_EXCB;
-		}
-
-		regval |= AD7746_EXCSETUP_EXCLVL(pdata->exclvl);
-	} else {
-		dev_warn(&client->dev, "No platform data? using default\n");
-		regval = AD7746_EXCSETUP_EXCA | AD7746_EXCSETUP_EXCB |
-			AD7746_EXCSETUP_EXCLVL(3);
-	}
-
-	ret = i2c_smbus_write_byte_data(chip->client,
-					AD7746_REG_EXC_SETUP, regval);
-	if (ret < 0)
-		return ret;
-
-	ret = devm_iio_device_register(indio_dev->dev.parent, indio_dev);
-	if (ret)
-		return ret;
-
-	return 0;
-}
-
-static int ad7746_remove(struct i2c_client *client)
-{
-	struct iio_dev *indio_dev = i2c_get_clientdata(client);
-	struct ad7746_chip_info *chip = iio_priv(indio_dev);
-	unsigned char regval;
-	int ret;
-
-	mutex_lock(&chip->lock);
-
-	regval = chip->config | AD7746_CONF_MODE_PWRDN;
-	ret = i2c_smbus_write_byte_data(chip->client, AD7746_REG_CFG, regval);
-
-	mutex_unlock(&chip->lock);
-
-	if (ret < 0) {
-		dev_warn(&client->dev, "Could NOT Power Down!\n");
-		goto out;
-	}
-
-	iio_device_unregister(indio_dev);
-
-out:
-	return ret;
-}
-
-static const struct i2c_device_id ad7746_id[] = {
-	{ "ad7745", 7745 },
-	{ "ad7746", 7746 },
-	{ "ad7747", 7747 },
-	{}
-};
-MODULE_DEVICE_TABLE(i2c, ad7746_id);
-
-#ifdef CONFIG_OF
-static const struct of_device_id ad7746_of_match[] = {
-	{ .compatible = "adi,ad7745" },
-	{ .compatible = "adi,ad7746" },
-	{ .compatible = "adi,ad7747" },
-	{ }
-};
-MODULE_DEVICE_TABLE(of, ad7746_of_match);
-#endif
-
-static struct i2c_driver ad7746_driver = {
-	.driver = {
-		.name = KBUILD_MODNAME,
-		.of_match_table = of_match_ptr(ad7746_of_match),
-	},
-	.probe = ad7746_probe,
-	.remove = ad7746_remove,
-	.id_table = ad7746_id,
-};
-module_i2c_driver(ad7746_driver);
-
-MODULE_AUTHOR("Michael Hennerich <hennerich@...ckfin.uclinux.org>");
-MODULE_DESCRIPTION("Analog Devices AD7746/5/7 capacitive sensor driver");
-MODULE_LICENSE("GPL v2");
diff --git a/drivers/staging/iio/cdc/ad7746.h b/drivers/staging/iio/cdc/ad7746.h
deleted file mode 100644
index 2fbcee8..0000000
--- a/drivers/staging/iio/cdc/ad7746.h
+++ /dev/null
@@ -1,24 +0,0 @@
-/*
- * AD7746 capacitive sensor driver supporting AD7745, AD7746 and AD7747
- *
- * Copyright 2011 Analog Devices Inc.
- *
- * Licensed under the GPL-2.
- */
-
-#ifndef IIO_CDC_AD7746_H_
-#define IIO_CDC_AD7746_H_
-
-/*
- * TODO: struct ad7746_platform_data needs to go into include/linux/iio
- */
-
-struct ad7746_platform_data {
-	unsigned char exclvl;	/*Excitation Voltage Level */
-	bool exca_en;		/* enables EXCA pin as the excitation output */
-	bool exca_inv_en;	/* enables /EXCA pin as the excitation output */
-	bool excb_en;		/* enables EXCB pin as the excitation output */
-	bool excb_inv_en;	/* enables /EXCB pin as the excitation output */
-};
-
-#endif /* IIO_CDC_AD7746_H_ */
-- 
2.7.4

Powered by blists - more mailing lists