lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <CAL_JsqKrBa5Rneu+BJOXd6n-xZEVqkKg4RqXHYvNs5xz7gdS2Q@mail.gmail.com>
Date:   Tue, 17 Apr 2018 08:04:24 -0500
From:   Rob Herring <robh+dt@...nel.org>
To:     Phil Edworthy <phil.edworthy@...esas.com>
Cc:     Hoan Tran <hotran@....com>,
        Linus Walleij <linus.walleij@...aro.org>,
        Mark Rutland <mark.rutland@....com>,
        Lee Jones <lee.jones@...aro.org>,
        Andy Shevchenko <andy.shevchenko@...il.com>,
        Michel Pollet <michel.pollet@...renesas.com>,
        linux-gpio@...r.kernel.org, devicetree@...r.kernel.org,
        "open list:MEDIA DRIVERS FOR RENESAS - FCP" 
        <linux-renesas-soc@...r.kernel.org>,
        "linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>
Subject: Re: [PATCH v4] gpio: dwapb: Add support for 1 interrupt per port A GPIO

On Tue, Apr 17, 2018 at 7:42 AM, Phil Edworthy
<phil.edworthy@...esas.com> wrote:
> The DesignWare GPIO IP can be configured for either 1 interrupt or 1
> per GPIO in port A, but the driver currently only supports 1 interrupt.
> See the DesignWare DW_apb_gpio Databook description of the
> 'GPIO_INTR_IO' parameter.
>
> This change allows the driver to work with up to 32 interrupts, it will
> get as many interrupts as specified in the DT 'interrupts' property.
> It doesn't do anything clever with the different interrupts, it just calls
> the same handler used for single interrupt hardware.
>
> Signed-off-by: Phil Edworthy <phil.edworthy@...esas.com>
> ---
> One point to mention is that I have made it possible for users to have
> unconncted interrupts by specifying holes in the list of interrupts. This is
> done by supporting the interrupts-extended DT prop.
> However, I have no use for this and had to hack some test case for this.
> Perhaps the driver should support 1 interrupt or all GPIOa as interrupts?
>
> v4:
>  - Use of_irq_get() instead of of_irq_parse_one()+irq_create_of_mapping()
> v3:
>  - Rolled mfd: intel_quark_i2c_gpio fix into this patch to avoid bisect problems
> v2:
>  - Replaced interrupt-mask DT prop with support for the interrupts-extended
>    prop. This means replacing the call to irq_of_parse_and_map() with calls
>    to of_irq_parse_one() and irq_create_of_mapping().
>
> Note: There are a few *code* lines over 80 chars, but this is just guidance,
>    right? Especially as there are already some lines over 80 chars.
>
> snps:gpio fix
>
> Signed-off-by: Phil Edworthy <phil.edworthy@...esas.com>
> ---
>  .../devicetree/bindings/gpio/snps-dwapb-gpio.txt   |  9 +++--
>  drivers/gpio/gpio-dwapb.c                          | 42 +++++++++++++++++-----
>  drivers/mfd/intel_quark_i2c_gpio.c                 |  3 +-
>  include/linux/platform_data/gpio-dwapb.h           |  3 +-
>  4 files changed, 44 insertions(+), 13 deletions(-)

Reviewed-by: Rob Herring <robh@...nel.org>

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ