linux-kernel - Re: [PATCH v4] gpio: dwapb: Add support for 1 interrupt per port A GPIO

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [day] [month] [year] [list]

Message-ID: <20180418081313.dqxdtjqmw4z27uny@dell>
Date:   Wed, 18 Apr 2018 09:13:13 +0100
From:   Lee Jones <lee.jones@...aro.org>
To:     Phil Edworthy <phil.edworthy@...esas.com>
Cc:     Hoan Tran <hotran@....com>,
        Linus Walleij <linus.walleij@...aro.org>,
        Rob Herring <robh+dt@...nel.org>,
        Mark Rutland <mark.rutland@....com>,
        Andy Shevchenko <andy.shevchenko@...il.com>,
        Michel Pollet <michel.pollet@...renesas.com>,
        linux-gpio@...r.kernel.org, devicetree@...r.kernel.org,
        linux-renesas-soc@...r.kernel.org, linux-kernel@...r.kernel.org
Subject: Re: [PATCH v4] gpio: dwapb: Add support for 1 interrupt per port A
 GPIO

On Tue, 17 Apr 2018, Phil Edworthy wrote:

> The DesignWare GPIO IP can be configured for either 1 interrupt or 1
> per GPIO in port A, but the driver currently only supports 1 interrupt.
> See the DesignWare DW_apb_gpio Databook description of the
> 'GPIO_INTR_IO' parameter.
> 
> This change allows the driver to work with up to 32 interrupts, it will
> get as many interrupts as specified in the DT 'interrupts' property.
> It doesn't do anything clever with the different interrupts, it just calls
> the same handler used for single interrupt hardware.
> 
> Signed-off-by: Phil Edworthy <phil.edworthy@...esas.com>
> ---
> One point to mention is that I have made it possible for users to have
> unconncted interrupts by specifying holes in the list of interrupts. This is
> done by supporting the interrupts-extended DT prop.
> However, I have no use for this and had to hack some test case for this.
> Perhaps the driver should support 1 interrupt or all GPIOa as interrupts?
> 
> v4:
>  - Use of_irq_get() instead of of_irq_parse_one()+irq_create_of_mapping()
> v3:
>  - Rolled mfd: intel_quark_i2c_gpio fix into this patch to avoid bisect problems
> v2:
>  - Replaced interrupt-mask DT prop with support for the interrupts-extended
>    prop. This means replacing the call to irq_of_parse_and_map() with calls
>    to of_irq_parse_one() and irq_create_of_mapping().
> 
> Note: There are a few *code* lines over 80 chars, but this is just guidance,
>    right? Especially as there are already some lines over 80 chars.
> 
> snps:gpio fix
> 
> Signed-off-by: Phil Edworthy <phil.edworthy@...esas.com>
> ---
>  .../devicetree/bindings/gpio/snps-dwapb-gpio.txt   |  9 +++--
>  drivers/gpio/gpio-dwapb.c                          | 42 +++++++++++++++++-----
>  drivers/mfd/intel_quark_i2c_gpio.c                 |  3 +-

If Linus, is happy with the GPIO implementation, then the changes in
MFD look fine:

Acked-by: Lee Jones <lee.jones@...aro.org>

-- 
Lee Jones [李琼斯]
Linaro Services Technical Lead
Linaro.org │ Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog