| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <87in8feckt.fsf@bootlin.com>
Date: Wed, 25 Apr 2018 13:43:14 +0200
From: Gregory CLEMENT <gregory.clement@...tlin.com>
To: Maxime Chevallier <maxime.chevallier@...tlin.com>
Cc: davem@...emloft.net, netdev@...r.kernel.org,
linux-kernel@...r.kernel.org,
Antoine Tenart <antoine.tenart@...tlin.com>,
thomas.petazzoni@...tlin.com, miquel.raynal@...tlin.com,
nadavh@...vell.com, stefanc@...vell.com, ymarkman@...vell.com,
mw@...ihalf.com, linux@...linux.org.uk,
linux-arm-kernel@...ts.infradead.org
Subject: Re: [PATCH net 2/3] net: mvpp2: Fix clock resource by adding missing mg_core_clk
Hi Maxime,
On mer., avril 25 2018, Maxime Chevallier <maxime.chevallier@...tlin.com> wrote:
> Marvell's PPv2.2 IP needs an additional clock named "MG Core clock".
> This is required on Armada 7K and 8K.
>
> This commit adds the required clock, updates the devicetree and its
> documentation accordingly, also fixing a small typo in the
> marvell-mpp2.txt examples.
>
> Fixes: c7e92def1ef4 ("clk: mvebu: cp110: Fix clock tree representation")
> Signed-off-by: Maxime Chevallier <maxime.chevallier@...tlin.com>
> ---
> .../devicetree/bindings/net/marvell-pp2.txt | 9 +++++----
> arch/arm64/boot/dts/marvell/armada-cp110.dtsi | 5 +++--
Could you remove the dtsi part and submit it as a separate patch. Then I
will take care of it.
Thanks,
Gregory
> drivers/net/ethernet/marvell/mvpp2.c | 20 ++++++++++++++++++--
> 3 files changed, 26 insertions(+), 8 deletions(-)
>
> diff --git a/Documentation/devicetree/bindings/net/marvell-pp2.txt b/Documentation/devicetree/bindings/net/marvell-pp2.txt
> index 1814fa13f6ab..fc019df0d863 100644
> --- a/Documentation/devicetree/bindings/net/marvell-pp2.txt
> +++ b/Documentation/devicetree/bindings/net/marvell-pp2.txt
> @@ -21,9 +21,10 @@ Required properties:
> - main controller clock (for both armada-375-pp2 and armada-7k-pp2)
> - GOP clock (for both armada-375-pp2 and armada-7k-pp2)
> - MG clock (only for armada-7k-pp2)
> + - MG Core clock (only for armada-7k-pp2)
> - AXI clock (only for armada-7k-pp2)
> -- clock-names: names of used clocks, must be "pp_clk", "gop_clk", "mg_clk"
> - and "axi_clk" (the 2 latter only for armada-7k-pp2).
> +- clock-names: names of used clocks, must be "pp_clk", "gop_clk", "mg_clk",
> + "mg_core_clk" and "axi_clk" (the 3 latter only for armada-7k-pp2).
>
> The ethernet ports are represented by subnodes. At least one port is
> required.
> @@ -80,8 +81,8 @@ cpm_ethernet: ethernet@0 {
> compatible = "marvell,armada-7k-pp22";
> reg = <0x0 0x100000>, <0x129000 0xb000>;
> clocks = <&cpm_syscon0 1 3>, <&cpm_syscon0 1 9>,
> - <&cpm_syscon0 1 5>, <&cpm_syscon0 1 18>;
> - clock-names = "pp_clk", "gop_clk", "gp_clk", "axi_clk";
> + <&cpm_syscon0 1 5>, <&cpm_syscon0 1 6>, <&cpm_syscon0 1 18>;
> + clock-names = "pp_clk", "gop_clk", "mg_clk", "mg_core_clk", "axi_clk";
>
> eth0: eth0 {
> interrupts = <ICU_GRP_NSR 39 IRQ_TYPE_LEVEL_HIGH>,
> diff --git a/arch/arm64/boot/dts/marvell/armada-cp110.dtsi b/arch/arm64/boot/dts/marvell/armada-cp110.dtsi
> index 48cad7919efa..6c137ac656e9 100644
> --- a/arch/arm64/boot/dts/marvell/armada-cp110.dtsi
> +++ b/arch/arm64/boot/dts/marvell/armada-cp110.dtsi
> @@ -38,9 +38,10 @@
> compatible = "marvell,armada-7k-pp22";
> reg = <0x0 0x100000>, <0x129000 0xb000>;
> clocks = <&CP110_LABEL(clk) 1 3>, <&CP110_LABEL(clk) 1 9>,
> - <&CP110_LABEL(clk) 1 5>, <&CP110_LABEL(clk) 1 18>;
> + <&CP110_LABEL(clk) 1 5>, <&CP110_LABEL(clk) 1 6>,
> + <&CP110_LABEL(clk) 1 18>;
> clock-names = "pp_clk", "gop_clk",
> - "mg_clk", "axi_clk";
> + "mg_clk", "mg_core_clk", "axi_clk";
> marvell,system-controller = <&CP110_LABEL(syscon0)>;
> status = "disabled";
> dma-coherent;
> diff --git a/drivers/net/ethernet/marvell/mvpp2.c b/drivers/net/ethernet/marvell/mvpp2.c
> index 0c2f04813d42..6a17b67a0d61 100644
> --- a/drivers/net/ethernet/marvell/mvpp2.c
> +++ b/drivers/net/ethernet/marvell/mvpp2.c
> @@ -942,6 +942,7 @@ struct mvpp2 {
> struct clk *pp_clk;
> struct clk *gop_clk;
> struct clk *mg_clk;
> + struct clk *mg_core_clk;
> struct clk *axi_clk;
>
> /* List of pointers to port structures */
> @@ -8768,18 +8769,28 @@ static int mvpp2_probe(struct platform_device *pdev)
> err = clk_prepare_enable(priv->mg_clk);
> if (err < 0)
> goto err_gop_clk;
> +
> + priv->mg_core_clk = devm_clk_get(&pdev->dev, "mg_core_clk");
> + if (IS_ERR(priv->mg_core_clk)) {
> + err = PTR_ERR(priv->mg_core_clk);
> + goto err_mg_clk;
> + }
> +
> + err = clk_prepare_enable(priv->mg_core_clk);
> + if (err < 0)
> + goto err_mg_clk;
> }
>
> priv->axi_clk = devm_clk_get(&pdev->dev, "axi_clk");
> if (IS_ERR(priv->axi_clk)) {
> err = PTR_ERR(priv->axi_clk);
> if (err == -EPROBE_DEFER)
> - goto err_mg_clk;
> + goto err_mg_core_clk;
> priv->axi_clk = NULL;
> } else {
> err = clk_prepare_enable(priv->axi_clk);
> if (err < 0)
> - goto err_mg_clk;
> + goto err_mg_core_clk;
> }
>
> /* Get system's tclk rate */
> @@ -8851,6 +8862,10 @@ static int mvpp2_probe(struct platform_device *pdev)
> }
> err_axi_clk:
> clk_disable_unprepare(priv->axi_clk);
> +
> +err_mg_core_clk:
> + if (priv->hw_version == MVPP22)
> + clk_disable_unprepare(priv->mg_core_clk);
> err_mg_clk:
> if (priv->hw_version == MVPP22)
> clk_disable_unprepare(priv->mg_clk);
> @@ -8898,6 +8913,7 @@ static int mvpp2_remove(struct platform_device *pdev)
> return 0;
>
> clk_disable_unprepare(priv->axi_clk);
> + clk_disable_unprepare(priv->mg_core_clk);
> clk_disable_unprepare(priv->mg_clk);
> clk_disable_unprepare(priv->pp_clk);
> clk_disable_unprepare(priv->gop_clk);
> --
> 2.11.0
>
--
Gregory Clement, Bootlin (formerly Free Electrons)
Embedded Linux and Kernel engineering
http://bootlin.com
Powered by blists - more mailing lists