linux-kernel - [PATCH] ARM: dts: imx6sx-sabreauto: add egalax touch screen support

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [thread-next>] [day] [month] [year] [list]

Message-Id: <1524813650-19241-1-git-send-email-Anson.Huang@nxp.com>
Date:   Fri, 27 Apr 2018 15:20:50 +0800
From:   Anson Huang <Anson.Huang@....com>
To:     shawnguo@...nel.org, kernel@...gutronix.de, fabio.estevam@....com,
        robh+dt@...nel.org, mark.rutland@....com, haibo.chen@....com
Cc:     Linux-imx@....com, linux-arm-kernel@...ts.infradead.org,
        devicetree@...r.kernel.org, linux-kernel@...r.kernel.org
Subject: [PATCH] ARM: dts: imx6sx-sabreauto: add egalax touch screen support

From: Haibo Chen <haibo.chen@....com>

Add egalax touch screen support on i2c2 bus.

Signed-off-by: Haibo Chen <haibo.chen@...escale.com>
Signed-off-by: Anson Huang <Anson.Huang@....com>
---
this patch is based on patch (ARM: dts: imx6sx-sabreauto: add debug LED support) I sent out for review.
 arch/arm/boot/dts/imx6sx-sabreauto.dts | 16 ++++++++++++++++
 1 file changed, 16 insertions(+)

diff --git a/arch/arm/boot/dts/imx6sx-sabreauto.dts b/arch/arm/boot/dts/imx6sx-sabreauto.dts
index 6b94f24..2f6e474 100644
--- a/arch/arm/boot/dts/imx6sx-sabreauto.dts
+++ b/arch/arm/boot/dts/imx6sx-sabreauto.dts
@@ -131,6 +131,12 @@
 &iomuxc {
 	imx6x-sabreauto {
 
+		pinctrl_egalax_int: egalax_intgrp {
+			fsl,pins = <
+				MX6SX_PAD_SD4_RESET_B__GPIO6_IO_22      0x80000000
+			>;
+		};
+
 		pinctrl_led: ledgrp {
 			fsl,pins = <
 				MX6SX_PAD_CSI_PIXCLK__GPIO1_IO_24 0x17059
@@ -274,6 +280,16 @@
 	pinctrl-0 = <&pinctrl_i2c2_1>;
 	status = "okay";
 
+	egalax_ts@04 {
+		compatible = "eeti,egalax_ts";
+		reg = <0x04>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_egalax_int>;
+		interrupt-parent = <&gpio6>;
+		interrupts = <22 IRQ_TYPE_EDGE_FALLING>;
+		wakeup-gpios = <&gpio6 22 GPIO_ACTIVE_HIGH>;
+	};
+
 	max7322: gpio@68 {
 		compatible = "maxim,max7322";
 		reg = <0x68>;
-- 
2.7.4