[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <87lgd188vu.fsf@intel.com>
Date: Thu, 03 May 2018 11:02:13 +0300
From: Jani Nikula <jani.nikula@...ux.intel.com>
To: Satendra Singh Thakur <satendra.t@...sung.com>,
Liviu Dudau <liviu.dudau@....com>,
Brian Starkey <brian.starkey@....com>,
Mali DP Maintainers <malidp@...s.arm.com>,
David Airlie <airlied@...ux.ie>,
Boris Brezillon <boris.brezillon@...tlin.com>,
Nicolas Ferre <nicolas.ferre@...rochip.com>,
Alexandre Belloni <alexandre.belloni@...tlin.com>,
Gustavo Padovan <gustavo@...ovan.org>,
Maarten Lankhorst <maarten.lankhorst@...ux.intel.com>,
Sean Paul <seanpaul@...omium.org>,
Inki Dae <inki.dae@...sung.com>,
Joonyoung Shim <jy0922.shim@...sung.com>,
Seung-Woo Kim <sw0312.kim@...sung.com>,
Kyungmin Park <kyungmin.park@...sung.com>,
Kukjin Kim <kgene@...nel.org>,
Krzysztof Kozlowski <krzk@...nel.org>,
dri-devel@...ts.freedesktop.org, linux-kernel@...r.kernel.org,
linux-arm-kernel@...ts.infradead.org,
linux-samsung-soc@...r.kernel.org
Cc: Hemanshu Srivastava <hemanshu.s@...sung.com>,
Satendra Singh Thakur <satendra.t@...sung.com>,
Madhur Verma <madhur.verma@...sung.com>
Subject: Re: [PATCH] drm/kms/mode: added a new helper for calculating videomode from crtc's display mode
On Thu, 03 May 2018, Satendra Singh Thakur <satendra.t@...sung.com> wrote:
> 1.
> -Added a new helper drm_display_mode_crtc_to_videomode
> -This helper calculates mode parameters like
> horizontal front_porch, back_porch, sync length
> vertical front_porch, back_porch, sync length
> using crtc_* fields of struct drm_display_mode
> -It uses following fields of crtc mode
> horizontal sync start/end, active and total length
> vertical sync start/end, active and total length
> 2.
> -Most of the driver use user-supplied mode for calculating videomode
> -However, few drivers use HW (crtc) mode for calculating videomode
> -This helper will be useful for such drivers
> 3.
> -Currently following drivers will be using this new helper
> -arm hdlcd
> -atmel hlcdc
> -exynos 5433 decon
> -exynos7 decon
> -exynos fimd
> 4.
> -This patch removes related duplicate code from above mentioned drivers
>
> Signed-off-by: Satendra Singh Thakur <satendra.t@...sung.com>
> Cc: Madhur Verma <madhur.verma@...sung.com>
> Cc: Hemanshu Srivastava <hemanshu.s@...sung.com>
> ---
> drivers/gpu/drm/arm/hdlcd_crtc.c | 8 +-------
> drivers/gpu/drm/atmel-hlcdc/atmel_hlcdc_crtc.c | 7 +------
> drivers/gpu/drm/drm_modes.c | 20 ++++++++++++++++++++
> drivers/gpu/drm/exynos/exynos5433_drm_decon.c | 22 ++++++++++------------
> drivers/gpu/drm/exynos/exynos7_drm_decon.c | 23 ++++++++++-------------
> drivers/gpu/drm/exynos/exynos_drm_fimd.c | 22 +++++++++-------------
> include/drm/drm_modes.h | 2 ++
> 7 files changed, 53 insertions(+), 51 deletions(-)
>
> diff --git a/drivers/gpu/drm/arm/hdlcd_crtc.c b/drivers/gpu/drm/arm/hdlcd_crtc.c
> index cf5cbd6..d20e471 100644
> --- a/drivers/gpu/drm/arm/hdlcd_crtc.c
> +++ b/drivers/gpu/drm/arm/hdlcd_crtc.c
> @@ -130,13 +130,7 @@ static void hdlcd_crtc_mode_set_nofb(struct drm_crtc *crtc)
> struct videomode vm;
> unsigned int polarities, err;
>
> - vm.vfront_porch = m->crtc_vsync_start - m->crtc_vdisplay;
> - vm.vback_porch = m->crtc_vtotal - m->crtc_vsync_end;
> - vm.vsync_len = m->crtc_vsync_end - m->crtc_vsync_start;
> - vm.hfront_porch = m->crtc_hsync_start - m->crtc_hdisplay;
> - vm.hback_porch = m->crtc_htotal - m->crtc_hsync_end;
> - vm.hsync_len = m->crtc_hsync_end - m->crtc_hsync_start;
> -
> + drm_display_mode_crtc_to_videomode(m, &vm);
> polarities = HDLCD_POLARITY_DATAEN | HDLCD_POLARITY_DATA;
>
> if (m->flags & DRM_MODE_FLAG_PHSYNC)
> diff --git a/drivers/gpu/drm/atmel-hlcdc/atmel_hlcdc_crtc.c b/drivers/gpu/drm/atmel-hlcdc/atmel_hlcdc_crtc.c
> index d732810..bafcef6 100644
> --- a/drivers/gpu/drm/atmel-hlcdc/atmel_hlcdc_crtc.c
> +++ b/drivers/gpu/drm/atmel-hlcdc/atmel_hlcdc_crtc.c
> @@ -81,12 +81,7 @@ static void atmel_hlcdc_crtc_mode_set_nofb(struct drm_crtc *c)
> unsigned int cfg;
> int div;
>
> - vm.vfront_porch = adj->crtc_vsync_start - adj->crtc_vdisplay;
> - vm.vback_porch = adj->crtc_vtotal - adj->crtc_vsync_end;
> - vm.vsync_len = adj->crtc_vsync_end - adj->crtc_vsync_start;
> - vm.hfront_porch = adj->crtc_hsync_start - adj->crtc_hdisplay;
> - vm.hback_porch = adj->crtc_htotal - adj->crtc_hsync_end;
> - vm.hsync_len = adj->crtc_hsync_end - adj->crtc_hsync_start;
> + drm_display_mode_crtc_to_videomode(adj, &vm);
>
> regmap_write(regmap, ATMEL_HLCDC_CFG(1),
> (vm.hsync_len - 1) | ((vm.vsync_len - 1) << 16));
> diff --git a/drivers/gpu/drm/drm_modes.c b/drivers/gpu/drm/drm_modes.c
> index e82b61e..a406749 100644
> --- a/drivers/gpu/drm/drm_modes.c
> +++ b/drivers/gpu/drm/drm_modes.c
> @@ -654,6 +654,26 @@ void drm_display_mode_to_videomode(const struct drm_display_mode *dmode,
> vm->flags |= DISPLAY_FLAGS_DOUBLECLK;
> }
> EXPORT_SYMBOL_GPL(drm_display_mode_to_videomode);
> +/**
> + * drm_display_mode_crtc_to_videomode - fill in @vm using crtc fields of@...de,
"of@...de" needs a space, superfluous comma at the end.
> + * @dmode: drm_display_mode structure to use as source
> + * @vm: videomode structure to use as destination
> + *
> + * Fills out @vm using the crtc display mode specified in @dmode.
> + */
> +void drm_display_mode_crtc_to_videomode(const struct drm_display_mode *dmode,
> + struct videomode *vm)
> +{
> + vm->hfront_porch = dmode->crtc_hsync_start - dmode->crtc_hdisplay;
> + vm->hsync_len = dmode->crtc_hsync_end - dmode->crtc_hsync_start;
> + vm->hback_porch = dmode->crtc_htotal - dmode->crtc_hsync_end;
> +
> + vm->vfront_porch = dmode->crtc_vsync_start - dmode->crtc_vdisplay;
> + vm->vsync_len = dmode->crtc_vsync_end - dmode->crtc_vsync_start;
> + vm->vback_porch = dmode->crtc_vtotal - dmode->crtc_vsync_end;
IMO this should fill in or at least clear all fields of videomode, in
many call sites they'll contain stack garbage.
> +
Superfluous newline.
> +}
> +EXPORT_SYMBOL_GPL(drm_display_mode_crtc_to_videomode);
>
> /**
> * drm_bus_flags_from_videomode - extract information about pixelclk and
> diff --git a/drivers/gpu/drm/exynos/exynos5433_drm_decon.c b/drivers/gpu/drm/exynos/exynos5433_drm_decon.c
> index 1c330f2..1ba73a8 100644
> --- a/drivers/gpu/drm/exynos/exynos5433_drm_decon.c
> +++ b/drivers/gpu/drm/exynos/exynos5433_drm_decon.c
> @@ -20,6 +20,7 @@
> #include <linux/of_gpio.h>
> #include <linux/pm_runtime.h>
> #include <linux/regmap.h>
> +#include <video/videomode.h>
>
> #include "exynos_drm_drv.h"
> #include "exynos_drm_crtc.h"
> @@ -225,26 +226,23 @@ static void decon_commit(struct exynos_drm_crtc *crtc)
> writel(val, ctx->addr + DECON_VIDTCON2);
>
> if (!crtc->i80_mode) {
> - int vbp = m->crtc_vtotal - m->crtc_vsync_end;
> - int vfp = m->crtc_vsync_start - m->crtc_vdisplay;
> + struct videomode vm;
>
> + drm_display_mode_crtc_to_videomode(m, &vm);
> if (interlaced)
> - vbp = vbp / 2 - 1;
> - val = VIDTCON00_VBPD_F(vbp - 1) | VIDTCON00_VFPD_F(vfp - 1);
> + vm.vback_porch = (vm.vback_porch >> 1) - 1;
> + val = VIDTCON00_VBPD_F(vm.vback_porch - 1) |
> + VIDTCON00_VFPD_F(vm.vfront_porch - 1);
> writel(val, ctx->addr + DECON_VIDTCON00);
>
> - val = VIDTCON01_VSPW_F(
> - m->crtc_vsync_end - m->crtc_vsync_start - 1);
> + val = VIDTCON01_VSPW_F(vm.vsync_len - 1);
> writel(val, ctx->addr + DECON_VIDTCON01);
>
> - val = VIDTCON10_HBPD_F(
> - m->crtc_htotal - m->crtc_hsync_end - 1) |
> - VIDTCON10_HFPD_F(
> - m->crtc_hsync_start - m->crtc_hdisplay - 1);
> + val = VIDTCON10_HBPD_F(vm.hback_porch - 1) |
> + VIDTCON10_HFPD_F(vm.hfront_porch - 1);
> writel(val, ctx->addr + DECON_VIDTCON10);
>
> - val = VIDTCON11_HSPW_F(
> - m->crtc_hsync_end - m->crtc_hsync_start - 1);
> + val = VIDTCON11_HSPW_F(vm.hsync_len - 1);
> writel(val, ctx->addr + DECON_VIDTCON11);
> }
>
> diff --git a/drivers/gpu/drm/exynos/exynos7_drm_decon.c b/drivers/gpu/drm/exynos/exynos7_drm_decon.c
> index 3931d5e..148daae 100644
> --- a/drivers/gpu/drm/exynos/exynos7_drm_decon.c
> +++ b/drivers/gpu/drm/exynos/exynos7_drm_decon.c
> @@ -25,6 +25,7 @@
>
> #include <video/of_display_timing.h>
> #include <video/of_videomode.h>
> +#include <video/videomode.h>
>
> #include "exynos_drm_crtc.h"
> #include "exynos_drm_plane.h"
> @@ -168,28 +169,24 @@ static void decon_commit(struct exynos_drm_crtc *crtc)
> return;
>
> if (!ctx->i80_if) {
> - int vsync_len, vbpd, vfpd, hsync_len, hbpd, hfpd;
> + struct videomode vm;
> +
> + drm_display_mode_crtc_to_videomode(mode, &vm);
> /* setup vertical timing values. */
> - vsync_len = mode->crtc_vsync_end - mode->crtc_vsync_start;
> - vbpd = mode->crtc_vtotal - mode->crtc_vsync_end;
> - vfpd = mode->crtc_vsync_start - mode->crtc_vdisplay;
>
> - val = VIDTCON0_VBPD(vbpd - 1) | VIDTCON0_VFPD(vfpd - 1);
> + val = VIDTCON0_VBPD(vm.vback_porch - 1) |
> + VIDTCON0_VFPD(vm.vfront_porch - 1);
> writel(val, ctx->regs + VIDTCON0);
>
> - val = VIDTCON1_VSPW(vsync_len - 1);
> + val = VIDTCON1_VSPW(vm.vsync_len - 1);
> writel(val, ctx->regs + VIDTCON1);
>
> /* setup horizontal timing values. */
> - hsync_len = mode->crtc_hsync_end - mode->crtc_hsync_start;
> - hbpd = mode->crtc_htotal - mode->crtc_hsync_end;
> - hfpd = mode->crtc_hsync_start - mode->crtc_hdisplay;
> -
> - /* setup horizontal timing values. */
> - val = VIDTCON2_HBPD(hbpd - 1) | VIDTCON2_HFPD(hfpd - 1);
> + val = VIDTCON2_HBPD(vm.hback_porch - 1) |
> + VIDTCON2_HFPD(vm.hfront_porch - 1);
> writel(val, ctx->regs + VIDTCON2);
>
> - val = VIDTCON3_HSPW(hsync_len - 1);
> + val = VIDTCON3_HSPW(vm.hsync_len - 1);
> writel(val, ctx->regs + VIDTCON3);
> }
>
> diff --git a/drivers/gpu/drm/exynos/exynos_drm_fimd.c b/drivers/gpu/drm/exynos/exynos_drm_fimd.c
> index d42ae2b..b3ab89d 100644
> --- a/drivers/gpu/drm/exynos/exynos_drm_fimd.c
> +++ b/drivers/gpu/drm/exynos/exynos_drm_fimd.c
> @@ -25,6 +25,7 @@
>
> #include <video/of_display_timing.h>
> #include <video/of_videomode.h>
> +#include <video/videomode.h>
> #include <video/samsung_fimd.h>
> #include <drm/exynos_drm.h>
>
> @@ -463,7 +464,7 @@ static void fimd_commit(struct exynos_drm_crtc *crtc)
> return;
> }
> } else {
> - int vsync_len, vbpd, vfpd, hsync_len, hbpd, hfpd;
> + struct videomode vm;
> u32 vidcon1;
>
> /* setup polarity values */
> @@ -474,24 +475,19 @@ static void fimd_commit(struct exynos_drm_crtc *crtc)
> vidcon1 |= VIDCON1_INV_HSYNC;
> writel(vidcon1, ctx->regs + driver_data->timing_base + VIDCON1);
>
> + drm_display_mode_crtc_to_videomode(mode, &vm);
> /* setup vertical timing values. */
> - vsync_len = mode->crtc_vsync_end - mode->crtc_vsync_start;
> - vbpd = mode->crtc_vtotal - mode->crtc_vsync_end;
> - vfpd = mode->crtc_vsync_start - mode->crtc_vdisplay;
>
> - val = VIDTCON0_VBPD(vbpd - 1) |
> - VIDTCON0_VFPD(vfpd - 1) |
> - VIDTCON0_VSPW(vsync_len - 1);
> + val = VIDTCON0_VBPD(vm.vback_porch - 1) |
> + VIDTCON0_VFPD(vm.vfront_porch - 1) |
> + VIDTCON0_VSPW(vm.vsync_len - 1);
> writel(val, ctx->regs + driver_data->timing_base + VIDTCON0);
>
> /* setup horizontal timing values. */
> - hsync_len = mode->crtc_hsync_end - mode->crtc_hsync_start;
> - hbpd = mode->crtc_htotal - mode->crtc_hsync_end;
> - hfpd = mode->crtc_hsync_start - mode->crtc_hdisplay;
>
> - val = VIDTCON1_HBPD(hbpd - 1) |
> - VIDTCON1_HFPD(hfpd - 1) |
> - VIDTCON1_HSPW(hsync_len - 1);
> + val = VIDTCON1_HBPD(vm.hback_porch - 1) |
> + VIDTCON1_HFPD(vm.hfront_porch - 1) |
> + VIDTCON1_HSPW(vm.hsync_len - 1);
> writel(val, ctx->regs + driver_data->timing_base + VIDTCON1);
> }
>
> diff --git a/include/drm/drm_modes.h b/include/drm/drm_modes.h
> index 0d310be..9ac764b 100644
> --- a/include/drm/drm_modes.h
> +++ b/include/drm/drm_modes.h
> @@ -473,6 +473,8 @@ void drm_display_mode_from_videomode(const struct videomode *vm,
> struct drm_display_mode *dmode);
> void drm_display_mode_to_videomode(const struct drm_display_mode *dmode,
> struct videomode *vm);
> +void drm_display_mode_crtc_to_videomode(const struct drm_display_mode *dmode,
> + struct videomode *vm);
> void drm_bus_flags_from_videomode(const struct videomode *vm, u32 *bus_flags);
> int of_get_drm_display_mode(struct device_node *np,
> struct drm_display_mode *dmode, u32 *bus_flags,
--
Jani Nikula, Intel Open Source Technology Center
Powered by blists - more mailing lists