[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-Id: <20180524052341.12422-1-chris.packham@alliedtelesis.co.nz>
Date: Thu, 24 May 2018 17:23:41 +1200
From: Chris Packham <chris.packham@...iedtelesis.co.nz>
To: sboyd@...nel.org, linux-clk@...r.kernel.org
Cc: Chris Packham <chris.packham@...iedtelesis.co.nz>,
Michael Turquette <mturquette@...libre.com>,
linux-kernel@...r.kernel.org
Subject: [PATCH] clk: mvebu: use correct bit for 98DX3236 NAND
The correct fieldbit value for the NAND PLL reload trigger is 27.
Fixes: commit e120c17a70e5 ("clk: mvebu: support for 98DX3236 SoC")
Signed-off-by: Chris Packham <chris.packham@...iedtelesis.co.nz>
---
I can't remember where the value of 26 came from. Looking at the lsp source I
have from Marvell it's always been 27, so I suspect I just messed up when
porting. The only documentation I have is that register field is bits 21:27
without adding any detail as to which clock trees correspond to the individual
bits so I'm not sure which clock tree was being triggered.
drivers/clk/mvebu/clk-corediv.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/clk/mvebu/clk-corediv.c b/drivers/clk/mvebu/clk-corediv.c
index 8491979f4096..68f05c53d40e 100644
--- a/drivers/clk/mvebu/clk-corediv.c
+++ b/drivers/clk/mvebu/clk-corediv.c
@@ -72,7 +72,7 @@ static const struct clk_corediv_desc mvebu_corediv_desc[] = {
};
static const struct clk_corediv_desc mv98dx3236_corediv_desc[] = {
- { .mask = 0x0f, .offset = 6, .fieldbit = 26 }, /* NAND clock */
+ { .mask = 0x0f, .offset = 6, .fieldbit = 27 }, /* NAND clock */
};
#define to_corediv_clk(p) container_of(p, struct clk_corediv, hw)
--
2.17.0
Powered by blists - more mailing lists