linux-kernel - [PATCH v4 4/7] ASoC: atmel-i2s: dt-bindings: add DT bindings for I2S controller

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <1527251668-31396-5-git-send-email-codrin.ciubotariu@microchip.com>
Date:   Fri, 25 May 2018 15:34:25 +0300
From:   Codrin Ciubotariu <codrin.ciubotariu@...rochip.com>
To:     <linux-arm-kernel@...ts.infradead.org>,
        <linux-kernel@...r.kernel.org>, <devicetree@...r.kernel.org>,
        <linux-clk@...r.kernel.org>, <alsa-devel@...a-project.org>,
        <nicolas.ferre@...rochip.com>, <boris.brezillon@...tlin.com>,
        <alexandre.belloni@...tlin.com>, <robh+dt@...nel.org>,
        <broonie@...nel.org>
CC:     <Cristian.Birsan@...rochip.com>,
        Cyrille Pitchen <cyrille.pitchen@...el.com>
Subject: [PATCH v4 4/7] ASoC: atmel-i2s: dt-bindings: add DT bindings for I2S controller

From: Cyrille Pitchen <cyrille.pitchen@...el.com>

This patch adds DT bindings for the new Atmel I2S controller embedded
inside sama5d2x SoCs.

Signed-off-by: Cyrille Pitchen <cyrille.pitchen@...el.com>
Signed-off-by: Codrin Ciubotariu <codrin.ciubotariu@...rochip.com>
---

Changes in v4:
	- more specific description for dmas, dma-names, clocks, clock-names
	  properties;
	- removed SoC and internal details of the block IP;
	- added description for the new clock mux phandle;

 .../devicetree/bindings/sound/atmel-i2s.txt        | 47 ++++++++++++++++++++++
 1 file changed, 47 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/sound/atmel-i2s.txt

diff --git a/Documentation/devicetree/bindings/sound/atmel-i2s.txt b/Documentation/devicetree/bindings/sound/atmel-i2s.txt
new file mode 100644
index 0000000..735368b
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/atmel-i2s.txt
@@ -0,0 +1,47 @@
+* Atmel I2S controller
+
+Required properties:
+- compatible:     Should be "atmel,sama5d2-i2s".
+- reg:            Should be the physical base address of the controller and the
+                  length of memory mapped region.
+- interrupts:     Should contain the interrupt for the controller.
+- dmas:           Should be one per channel name listed in the dma-names property,
+                  as described in atmel-dma.txt and dma.txt files.
+- dma-names:      Two dmas have to be defined, "tx" and "rx".
+                  This IP also supports one shared channel for both rx and tx;
+                  if this mode is used, one "rx-tx" name must be used.
+- clocks:         Must contain an entry for each entry in clock-names.
+                  Please refer to clock-bindings.txt.
+- clock-names:    Should be one of each entry matching the clocks phandles list:
+                  - "pclk" (peripheral clock) Required.
+                  - "gclk" (generated clock) Optional (1).
+                  - "aclk" (Audio PLL clock) Optional (1).
+                  - "muxclk" (I2S mux clock) Optional (1).
+
+Optional properties:
+- pinctrl-0:      Should specify pin control groups used for this controller.
+- princtrl-names: Should contain only one value - "default".
+
+
+(1) : Only the peripheral clock is required. The generated clock, the Audio
+      PLL clock adn the I2S mux clock are optional and should only be set
+      together, when Master Mode is required.
+
+Example:
+
+	i2s@...50000 {
+		compatible = "atmel,sama5d2-i2s";
+		reg = <0xf8050000 0x300>;
+		interrupts = <54 IRQ_TYPE_LEVEL_HIGH 7>;
+		dmas = <&dma0
+			(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
+			 AT91_XDMAC_DT_PERID(31))>,
+		       <&dma0
+			(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
+			 AT91_XDMAC_DT_PERID(32))>;
+		dma-names = "tx", "rx";
+		clocks = <&i2s0_clk>, <&i2s0_gclk>, <&audio_pll_pmc>, <&i2s0muxck>;
+		clock-names = "pclk", "gclk", "aclk", "muxclk";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_i2s0_default>;
+	};
-- 
2.7.4