[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <1527251668-31396-8-git-send-email-codrin.ciubotariu@microchip.com>
Date: Fri, 25 May 2018 15:34:28 +0300
From: Codrin Ciubotariu <codrin.ciubotariu@...rochip.com>
To: <linux-arm-kernel@...ts.infradead.org>,
<linux-kernel@...r.kernel.org>, <devicetree@...r.kernel.org>,
<linux-clk@...r.kernel.org>, <alsa-devel@...a-project.org>,
<nicolas.ferre@...rochip.com>, <boris.brezillon@...tlin.com>,
<alexandre.belloni@...tlin.com>, <robh+dt@...nel.org>,
<broonie@...nel.org>
CC: <Cristian.Birsan@...rochip.com>,
Cyrille Pitchen <cyrille.pitchen@...el.com>
Subject: [PATCH v4 7/7] ARM: dts: at91: sama5d2 Xplained: add pin muxing for I2S
From: Cyrille Pitchen <cyrille.pitchen@...el.com>
This patch sets the pin muxing for the I2S controllers
Signed-off-by: Cyrille Pitchen <cyrille.pitchen@...el.com>
[codrin.ciubotariu@...rochip.com: added pin muxing for the second
controller]
Signed-off-by: Codrin Ciubotariu <codrin.ciubotariu@...rochip.com>
---
arch/arm/boot/dts/at91-sama5d2_xplained.dts | 28 ++++++++++++++++++++++++++++
1 file changed, 28 insertions(+)
diff --git a/arch/arm/boot/dts/at91-sama5d2_xplained.dts b/arch/arm/boot/dts/at91-sama5d2_xplained.dts
index e4bbb7e..0391731 100644
--- a/arch/arm/boot/dts/at91-sama5d2_xplained.dts
+++ b/arch/arm/boot/dts/at91-sama5d2_xplained.dts
@@ -281,6 +281,11 @@
status = "okay";
};
+ i2s0: i2s@...50000 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2s0_default>;
+ };
+
can0: can@...54000 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_can0_default>;
@@ -424,6 +429,24 @@
bias-disable;
};
+ pinctrl_i2s0_default: i2s0_default {
+ pinmux = <PIN_PC1__I2SC0_CK>,
+ <PIN_PC2__I2SC0_MCK>,
+ <PIN_PC3__I2SC0_WS>,
+ <PIN_PC4__I2SC0_DI0>,
+ <PIN_PC5__I2SC0_DO0>;
+ bias-disable;
+ };
+
+ pinctrl_i2s1_default: i2s1_default {
+ pinmux = <PIN_PA15__I2SC1_CK>,
+ <PIN_PA14__I2SC1_MCK>,
+ <PIN_PA16__I2SC1_WS>,
+ <PIN_PA17__I2SC1_DI0>,
+ <PIN_PA18__I2SC1_DO0>;
+ bias-disable;
+ };
+
pinctrl_key_gpio_default: key_gpio_default {
pinmux = <PIN_PB9__GPIO>;
bias-pull-up;
@@ -546,6 +569,11 @@
status = "okay";
};
+ i2s1: i2s@...4c000 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2s1_default>;
+ };
+
can1: can@...50000 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_can1_default>;
--
2.7.4
Powered by blists - more mailing lists