| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20180614073650.29659-4-ivan.khoronzhuk@linaro.org>
Date: Thu, 14 Jun 2018 10:36:47 +0300
From: Ivan Khoronzhuk <ivan.khoronzhuk@...aro.org>
To: grygorii.strashko@...com, davem@...emloft.net
Cc: corbet@....net, akpm@...ux-foundation.org, netdev@...r.kernel.org,
linux-doc@...r.kernel.org, linux-kernel@...r.kernel.org,
linux-omap@...r.kernel.org, vinicius.gomes@...el.com,
henrik@...tad.us, jesus.sanchez-palencia@...el.com,
ilias.apalodimas@...aro.org, p-varis@...com, spatton@...com,
francois.ozog@...aro.org, yogeshs@...com, nsekhar@...com,
andrew@...n.ch, Ivan Khoronzhuk <ivan.khoronzhuk@...aro.org>
Subject: [PATCH v2 net-next 3/6] net: ethernet: ti: cpsw: add MQPRIO Qdisc offload
That's possible to offload vlan to tc priority mapping with
assumption sk_prio == L2 prio.
Example:
$ ethtool -L eth0 rx 1 tx 4
$ qdisc replace dev eth0 handle 100: parent root mqprio num_tc 3 \
map 2 2 1 0 2 2 2 2 2 2 2 2 2 2 2 2 queues 1@0 1@1 2@2 hw 1
$ tc -g class show dev eth0
+---(100:ffe2) mqprio
| +---(100:3) mqprio
| +---(100:4) mqprio
|
+---(100:ffe1) mqprio
| +---(100:2) mqprio
|
+---(100:ffe0) mqprio
+---(100:1) mqprio
Here, 100:1 is txq0, 100:2 is txq1, 100:3 is txq2, 100:4 is txq3
txq0 belongs to tc0, txq1 to tc1, txq2 and txq3 to tc2
The offload part only maps L2 prio to classes of traffic, but not
to transmit queues, so to direct traffic to traffic class vlan has
to be created with appropriate egress map.
Signed-off-by: Ivan Khoronzhuk <ivan.khoronzhuk@...aro.org>
---
drivers/net/ethernet/ti/cpsw.c | 82 ++++++++++++++++++++++++++++++++++
1 file changed, 82 insertions(+)
diff --git a/drivers/net/ethernet/ti/cpsw.c b/drivers/net/ethernet/ti/cpsw.c
index 406537d74ec1..edd14def98df 100644
--- a/drivers/net/ethernet/ti/cpsw.c
+++ b/drivers/net/ethernet/ti/cpsw.c
@@ -39,6 +39,7 @@
#include <linux/sys_soc.h>
#include <linux/pinctrl/consumer.h>
+#include <net/pkt_cls.h>
#include "cpsw.h"
#include "cpsw_ale.h"
@@ -153,6 +154,8 @@ do { \
#define IRQ_NUM 2
#define CPSW_MAX_QUEUES 8
#define CPSW_CPDMA_DESCS_POOL_SIZE_DEFAULT 256
+#define CPSW_TC_NUM 4
+#define CPSW_FIFO_SHAPERS_NUM (CPSW_TC_NUM - 1)
#define CPSW_RX_VLAN_ENCAP_HDR_PRIO_SHIFT 29
#define CPSW_RX_VLAN_ENCAP_HDR_PRIO_MSK GENMASK(2, 0)
@@ -453,6 +456,7 @@ struct cpsw_priv {
u8 mac_addr[ETH_ALEN];
bool rx_pause;
bool tx_pause;
+ bool mqprio_hw;
u32 emac_port;
struct cpsw_common *cpsw;
};
@@ -1577,6 +1581,14 @@ static void cpsw_slave_stop(struct cpsw_slave *slave, struct cpsw_common *cpsw)
soft_reset_slave(slave);
}
+static int cpsw_tc_to_fifo(int tc, int num_tc)
+{
+ if (tc == num_tc - 1)
+ return 0;
+
+ return CPSW_FIFO_SHAPERS_NUM - tc;
+}
+
static int cpsw_ndo_open(struct net_device *ndev)
{
struct cpsw_priv *priv = netdev_priv(ndev);
@@ -2190,6 +2202,75 @@ static int cpsw_ndo_set_tx_maxrate(struct net_device *ndev, int queue, u32 rate)
return ret;
}
+static int cpsw_set_mqprio(struct net_device *ndev, void *type_data)
+{
+ struct tc_mqprio_qopt_offload *mqprio = type_data;
+ struct cpsw_priv *priv = netdev_priv(ndev);
+ struct cpsw_common *cpsw = priv->cpsw;
+ int fifo, num_tc, count, offset;
+ struct cpsw_slave *slave;
+ u32 tx_prio_map = 0;
+ int i, tc, ret;
+
+ num_tc = mqprio->qopt.num_tc;
+ if (num_tc > CPSW_TC_NUM)
+ return -EINVAL;
+
+ if (mqprio->mode != TC_MQPRIO_MODE_DCB)
+ return -EINVAL;
+
+ ret = pm_runtime_get_sync(cpsw->dev);
+ if (ret < 0) {
+ pm_runtime_put_noidle(cpsw->dev);
+ return ret;
+ }
+
+ if (num_tc) {
+ for (i = 0; i < 8; i++) {
+ tc = mqprio->qopt.prio_tc_map[i];
+ fifo = cpsw_tc_to_fifo(tc, num_tc);
+ tx_prio_map |= fifo << (4 * i);
+ }
+
+ netdev_set_num_tc(ndev, num_tc);
+ for (i = 0; i < num_tc; i++) {
+ count = mqprio->qopt.count[i];
+ offset = mqprio->qopt.offset[i];
+ netdev_set_tc_queue(ndev, i, count, offset);
+ }
+ }
+
+ if (!mqprio->qopt.hw) {
+ /* restore default configuration */
+ netdev_reset_tc(ndev);
+ tx_prio_map = TX_PRIORITY_MAPPING;
+ }
+
+ priv->mqprio_hw = mqprio->qopt.hw;
+
+ offset = cpsw->version == CPSW_VERSION_1 ?
+ CPSW1_TX_PRI_MAP : CPSW2_TX_PRI_MAP;
+
+ slave = &cpsw->slaves[cpsw_slave_index(cpsw, priv)];
+ slave_write(slave, tx_prio_map, offset);
+
+ pm_runtime_put_sync(cpsw->dev);
+
+ return 0;
+}
+
+static int cpsw_ndo_setup_tc(struct net_device *ndev, enum tc_setup_type type,
+ void *type_data)
+{
+ switch (type) {
+ case TC_SETUP_QDISC_MQPRIO:
+ return cpsw_set_mqprio(ndev, type_data);
+
+ default:
+ return -EOPNOTSUPP;
+ }
+}
+
static const struct net_device_ops cpsw_netdev_ops = {
.ndo_open = cpsw_ndo_open,
.ndo_stop = cpsw_ndo_stop,
@@ -2205,6 +2286,7 @@ static const struct net_device_ops cpsw_netdev_ops = {
#endif
.ndo_vlan_rx_add_vid = cpsw_ndo_vlan_rx_add_vid,
.ndo_vlan_rx_kill_vid = cpsw_ndo_vlan_rx_kill_vid,
+ .ndo_setup_tc = cpsw_ndo_setup_tc,
};
static int cpsw_get_regs_len(struct net_device *ndev)
--
2.17.1
Powered by blists - more mailing lists