[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20180618174216.24801-2-krzk@kernel.org>
Date: Mon, 18 Jun 2018 19:42:16 +0200
From: Krzysztof Kozlowski <krzk@...nel.org>
To: Rob Herring <robh+dt@...nel.org>,
Mark Rutland <mark.rutland@....com>,
Catalin Marinas <catalin.marinas@....com>,
Will Deacon <will.deacon@....com>,
Kukjin Kim <kgene@...nel.org>,
Marek Szyprowski <m.szyprowski@...sung.com>,
devicetree@...r.kernel.org, linux-arm-kernel@...ts.infradead.org,
linux-samsung-soc@...r.kernel.org, linux-kernel@...r.kernel.org
Cc: Krzysztof Kozlowski <krzk@...nel.org>
Subject: [PATCH 2/2] arm64: dts: exynos: Remove unneeded DSI and DECON address/size cells in Exynos5433
The decon, decon_tv and dsi nodes have only one child port so
address/size mappings are not necessary. This fixes DTC warnings like:
Warning (graph_child_address): /soc/decon@...00000/ports:
graph node has single child node 'port@0', #address-cells/#size-cells are not necessary
Signed-off-by: Krzysztof Kozlowski <krzk@...nel.org>
---
arch/arm64/boot/dts/exynos/exynos5433-tm2-common.dtsi | 6 +-----
arch/arm64/boot/dts/exynos/exynos5433.dtsi | 12 ++----------
2 files changed, 3 insertions(+), 15 deletions(-)
diff --git a/arch/arm64/boot/dts/exynos/exynos5433-tm2-common.dtsi b/arch/arm64/boot/dts/exynos/exynos5433-tm2-common.dtsi
index a1e3194b7483..0a15ee513f5c 100644
--- a/arch/arm64/boot/dts/exynos/exynos5433-tm2-common.dtsi
+++ b/arch/arm64/boot/dts/exynos/exynos5433-tm2-common.dtsi
@@ -321,11 +321,7 @@
status = "okay";
ports {
- #address-cells = <1>;
- #size-cells = <0>;
-
- port@0 {
- reg = <0>;
+ port {
tv_to_hdmi: endpoint {
remote-endpoint = <&hdmi_to_tv>;
};
diff --git a/arch/arm64/boot/dts/exynos/exynos5433.dtsi b/arch/arm64/boot/dts/exynos/exynos5433.dtsi
index 3a9b4c4b9c63..e4367fd39120 100644
--- a/arch/arm64/boot/dts/exynos/exynos5433.dtsi
+++ b/arch/arm64/boot/dts/exynos/exynos5433.dtsi
@@ -850,11 +850,7 @@
iommu-names = "m0", "m1";
ports {
- #address-cells = <1>;
- #size-cells = <0>;
-
- port@0 {
- reg = <0>;
+ port {
decon_to_mic: endpoint {
remote-endpoint =
<&mic_to_decon>;
@@ -914,11 +910,7 @@
#size-cells = <0>;
ports {
- #address-cells = <1>;
- #size-cells = <0>;
-
- port@0 {
- reg = <0>;
+ port {
dsi_to_mic: endpoint {
remote-endpoint = <&mic_to_dsi>;
};
--
2.14.1
Powered by blists - more mailing lists