| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <201806252154.WvnJs6k3%fengguang.wu@intel.com>
Date: Mon, 25 Jun 2018 23:06:14 +0800
From: kbuild test robot <lkp@...el.com>
To: Radu Pirea <radu.pirea@...rochip.com>
Cc: kbuild-all@...org, broonie@...nel.org, nicolas.ferre@...rochip.com,
alexandre.belloni@...tlin.com, lee.jones@...aro.org,
richard.genoud@...il.com, robh+dt@...nel.org, mark.rutland@....com,
gregkh@...uxfoundation.org, linux-spi@...r.kernel.org,
linux-arm-kernel@...ts.infradead.org, linux-kernel@...r.kernel.org,
devicetree@...r.kernel.org, linux-serial@...r.kernel.org,
Radu Pirea <radu.pirea@...rochip.com>
Subject: Re: [PATCH v9 5/6] spi: at91-usart: add driver for at91-usart as spi
Hi Radu,
I love your patch! Perhaps something to improve:
[auto build test WARNING on ljones-mfd/for-mfd-next]
[also build test WARNING on v4.18-rc2 next-20180625]
[if your patch is applied to the wrong git tree, please drop us a note to help improve the system]
url: https://github.com/0day-ci/linux/commits/Radu-Pirea/Driver-for-at91-usart-in-spi-mode/20180625-183610
base: https://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd.git for-mfd-next
config: ia64-allmodconfig (attached as .config)
compiler: ia64-linux-gcc (GCC) 8.1.0
reproduce:
wget https://raw.githubusercontent.com/intel/lkp-tests/master/sbin/make.cross -O ~/bin/make.cross
chmod +x ~/bin/make.cross
# save the attached .config to linux build tree
GCC_VERSION=8.1.0 make.cross ARCH=ia64
All warnings (new ones prefixed by >>):
In file included from include/linux/gpio/driver.h:5,
from include/asm-generic/gpio.h:13,
from include/linux/gpio.h:62,
from include/linux/of_gpio.h:16,
from drivers//spi/spi-at91-usart.c:14:
drivers//spi/spi-at91-usart.c: In function 'at91_usart_spi_probe':
>> drivers//spi/spi-at91-usart.c:389:4: warning: format '%x' expects argument of type 'unsigned int', but argument 4 has type 'resource_size_t' {aka 'long long unsigned int'} [-Wformat=]
"AT91 USART SPI Controller version 0x%x at 0x%08x (irq %d)\n",
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers//spi/spi-at91-usart.c:391:4:
regs->start, irq);
~~~~~~~~~~~
include/linux/device.h:1382:51: note: in definition of macro 'dev_info'
#define dev_info(dev, fmt, arg...) _dev_info(dev, fmt, ##arg)
^~~
vim +389 drivers//spi/spi-at91-usart.c
312
313 static int at91_usart_spi_probe(struct platform_device *pdev)
314 {
315 struct resource *regs;
316 struct spi_controller *controller;
317 struct at91_usart_spi *aus;
318 struct clk *clk;
319 int irq;
320 int ret;
321
322 regs = platform_get_resource(to_platform_device(pdev->dev.parent),
323 IORESOURCE_MEM, 0);
324 if (!regs)
325 return -EINVAL;
326
327 irq = platform_get_irq(to_platform_device(pdev->dev.parent), 0);
328 if (irq < 0)
329 return irq;
330
331 clk = devm_clk_get(pdev->dev.parent, "usart");
332 if (IS_ERR(clk))
333 return PTR_ERR(clk);
334
335 ret = -ENOMEM;
336 controller = spi_alloc_master(&pdev->dev, sizeof(*aus));
337 if (!controller)
338 goto at91_usart_spi_probe_fail;
339
340 ret = at91_usart_gpio_setup(pdev);
341 if (ret)
342 goto at91_usart_spi_probe_fail;
343
344 controller->mode_bits = SPI_CPOL | SPI_CPHA | SPI_LOOP | SPI_CS_HIGH;
345 controller->dev.of_node = pdev->dev.parent->of_node;
346 controller->bits_per_word_mask = SPI_BPW_MASK(8);
347 controller->setup = at91_usart_spi_setup;
348 controller->flags = SPI_MASTER_MUST_RX | SPI_MASTER_MUST_TX;
349 controller->transfer_one = at91_usart_spi_transfer_one;
350 controller->prepare_message = at91_usart_spi_prepare_message;
351 controller->unprepare_message = at91_usart_spi_unprepare_message;
352 controller->cleanup = at91_usart_spi_cleanup;
353 controller->max_speed_hz = DIV_ROUND_UP(clk_get_rate(clk),
354 US_MIN_CLK_DIV);
355 controller->min_speed_hz = DIV_ROUND_UP(clk_get_rate(clk),
356 US_MAX_CLK_DIV);
357 platform_set_drvdata(pdev, controller);
358
359 aus = spi_master_get_devdata(controller);
360
361 aus->dev = &pdev->dev;
362 aus->regs = devm_ioremap_resource(&pdev->dev, regs);
363 if (IS_ERR(aus->regs)) {
364 ret = PTR_ERR(aus->regs);
365 goto at91_usart_spi_probe_fail;
366 }
367
368 aus->irq = irq;
369 aus->clk = clk;
370
371 ret = devm_request_irq(&pdev->dev, irq, at91_usart_spi_interrupt, 0,
372 dev_name(&pdev->dev), controller);
373 if (ret)
374 goto at91_usart_spi_probe_fail;
375
376 ret = clk_prepare_enable(clk);
377 if (ret)
378 goto at91_usart_spi_probe_fail;
379
380 aus->spi_clk = clk_get_rate(clk);
381 at91_usart_spi_init(aus);
382
383 spin_lock_init(&aus->lock);
384 ret = devm_spi_register_master(&pdev->dev, controller);
385 if (ret)
386 goto at91_usart_fail_register_master;
387
388 dev_info(&pdev->dev,
> 389 "AT91 USART SPI Controller version 0x%x at 0x%08x (irq %d)\n",
390 at91_usart_spi_readl(aus, VERSION),
391 regs->start, irq);
392
393 return 0;
394
395 at91_usart_fail_register_master:
396 clk_disable_unprepare(clk);
397 at91_usart_spi_probe_fail:
398 spi_master_put(controller);
399 return ret;
400 }
401
---
0-DAY kernel test infrastructure Open Source Technology Center
https://lists.01.org/pipermail/kbuild-all Intel Corporation
Download attachment ".config.gz" of type "application/gzip" (49794 bytes)
Powered by blists - more mailing lists