[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-Id: <a469ed55cb7c43901eaa8881cdd2a8845616d987.1529908086.git.baolin.wang@linaro.org>
Date: Mon, 25 Jun 2018 14:31:20 +0800
From: Baolin Wang <baolin.wang@...aro.org>
To: srinivas.kandagatla@...aro.org, robh+dt@...nel.org,
mark.rutland@....com
Cc: broonie@...nel.org, freeman.liu@...eadtrum.com,
baolin.wang@...aro.org, devicetree@...r.kernel.org,
linux-kernel@...r.kernel.org
Subject: [PATCH v2 1/2] dt-bindings: nvmem: Add Spreadtrum SC27XX efuse controller documentation
This patch adds the binding documentation for Spreadtrum SC27XX series
PMICs efuse controller device.
Signed-off-by: Baolin Wang <baolin.wang@...aro.org>
Reviewed-by: Rob Herring <robh@...nel.org>
---
Changes since v1:
- Add reviewed tag from Rob.
---
.../devicetree/bindings/nvmem/sc27xx-efuse.txt | 52 ++++++++++++++++++++
1 file changed, 52 insertions(+)
create mode 100644 Documentation/devicetree/bindings/nvmem/sc27xx-efuse.txt
diff --git a/Documentation/devicetree/bindings/nvmem/sc27xx-efuse.txt b/Documentation/devicetree/bindings/nvmem/sc27xx-efuse.txt
new file mode 100644
index 0000000..586c082
--- /dev/null
+++ b/Documentation/devicetree/bindings/nvmem/sc27xx-efuse.txt
@@ -0,0 +1,52 @@
+= Spreadtrum SC27XX PMIC eFuse device tree bindings =
+
+Required properties:
+- compatible: Should be one of the following.
+ "sprd,sc2720-efuse"
+ "sprd,sc2721-efuse"
+ "sprd,sc2723-efuse"
+ "sprd,sc2730-efuse"
+ "sprd,sc2731-efuse"
+- reg: Specify the address offset of efuse controller.
+- hwlocks: Reference to a phandle of a hwlock provider node.
+
+= Data cells =
+Are child nodes of eFuse, bindings of which as described in
+bindings/nvmem/nvmem.txt
+
+Example:
+
+ sc2731_pmic: pmic@0 {
+ compatible = "sprd,sc2731";
+ reg = <0>;
+ spi-max-frequency = <26000000>;
+ interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ efuse@380 {
+ compatible = "sprd,sc2731-efuse";
+ reg = <0x380>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ hwlocks = <&hwlock 12>;
+
+ /* Data cells */
+ thermal_calib: calib@10 {
+ reg = <0x10 0x2>;
+ };
+ };
+ };
+
+= Data consumers =
+Are device nodes which consume nvmem data cells.
+
+Example:
+
+ thermal {
+ ...
+ nvmem-cells = <&thermal_calib>;
+ nvmem-cell-names = "calibration";
+ };
--
1.7.9.5
Powered by blists - more mailing lists