lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-ID: <20180630105421.550-1-vigneshr@ti.com>
Date:   Sat, 30 Jun 2018 16:24:21 +0530
From:   Vignesh R <vigneshr@...com>
To:     Marek Vasut <marek.vasut@...il.com>,
        Boris Brezillon <boris.brezillon@...tlin.com>
CC:     Richard Weinberger <richard@....at>,
        <linux-mtd@...ts.infradead.org>, <linux-kernel@...r.kernel.org>,
        Linux ARM Mailing List <linux-arm-kernel@...ts.infradead.org>,
        Vignesh R <vigneshr@...com>
Subject: [PATCH] mtd: spi-nor: cadence-quadspi: Fix direct mode write timeouts

Sometimes when writing large size files to flash in direct/memory mapped
mode, it is seen that flash write enable command times out with error:
[  503.146293] cadence-qspi 47040000.ospi: Flash command execution timed out.

This is because, we need to make sure previous direct write operation
is complete by polling for IDLE bit in CONFIG_REG before starting the
next operation.

Fix this by polling for IDLE bit after memory mapped write.

Fixes: a27f2eaf2b27 ("mtd: spi-nor: cadence-quadspi: Add support for direct access mode")
Cc: stable@...r.kernel.org
Signed-off-by: Vignesh R <vigneshr@...com>
---
 drivers/mtd/spi-nor/cadence-quadspi.c | 6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

diff --git a/drivers/mtd/spi-nor/cadence-quadspi.c b/drivers/mtd/spi-nor/cadence-quadspi.c
index c3f7aaa5d18f..d7e10b36a0b9 100644
--- a/drivers/mtd/spi-nor/cadence-quadspi.c
+++ b/drivers/mtd/spi-nor/cadence-quadspi.c
@@ -926,10 +926,12 @@ static ssize_t cqspi_write(struct spi_nor *nor, loff_t to,
 	if (ret)
 		return ret;
 
-	if (f_pdata->use_direct_mode)
+	if (f_pdata->use_direct_mode) {
 		memcpy_toio(cqspi->ahb_base + to, buf, len);
-	else
+		ret = cqspi_wait_idle(cqspi);
+	} else {
 		ret = cqspi_indirect_write_execute(nor, to, buf, len);
+	}
 	if (ret)
 		return ret;
 
-- 
2.18.0

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ