| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Sun, 1 Jul 2018 17:34:04 +0800
From: Shawn Guo <shawnguo@...nel.org>
To: Robin Gong <yibin.gong@....com>
Cc: kernel@...gutronix.de, fabio.estevam@....com, robh+dt@...nel.org,
mark.rutland@....com, anson.huang@....com,
devicetree@...r.kernel.org, linux-kernel@...r.kernel.org,
linux-arm-kernel@...ts.infradead.org, linux-imx@....com
Subject: Re: [PATCH v1] ARM: dts: imx6sl-evk: keep sw4 always on
On Mon, Jun 25, 2018 at 08:34:11PM +0800, Robin Gong wrote:
> SW4 is one power rail for LPDDR2 on i.mx6sl-evk, so it should
> be kept always on. But it's disabled after switch disabled
> interface implemented in pfuze driver
> 'commit 5fe156f1cab4
> ("regulator: pfuze100: add enable/disable for switch")'.Thus,
> it breaks kernel bootup. Add 'regulator-always-on' for SW4.
>
> Signed-off-by: Robin Gong <yibin.gong@....com>
Does that mean boards with existing DTB installed will stop working with
new kernel? That's bad, and the kernel commit should probably be
reverted.
Shawn
> ---
> arch/arm/boot/dts/imx6sl-evk.dts | 1 +
> 1 file changed, 1 insertion(+)
>
> diff --git a/arch/arm/boot/dts/imx6sl-evk.dts b/arch/arm/boot/dts/imx6sl-evk.dts
> index 37e792f..798df66 100644
> --- a/arch/arm/boot/dts/imx6sl-evk.dts
> +++ b/arch/arm/boot/dts/imx6sl-evk.dts
> @@ -199,6 +199,7 @@
> sw4_reg: sw4 {
> regulator-min-microvolt = <800000>;
> regulator-max-microvolt = <3300000>;
> + regulator-always-on;
> };
>
> swbst_reg: swbst {
> --
> 2.7.4
>
>
> _______________________________________________
> linux-arm-kernel mailing list
> linux-arm-kernel@...ts.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
Powered by blists - more mailing lists