| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <CAFBinCDBEbVSEzhM2WOhxNX1DZLiSrkeo7GWdxGzBpOUH3PKQw@mail.gmail.com>
Date: Tue, 3 Jul 2018 21:18:14 +0200
From: Martin Blumenstingl <martin.blumenstingl@...glemail.com>
To: Neil Armstrong <narmstrong@...libre.com>
Cc: khilman@...libre.com, linux-amlogic@...ts.infradead.org,
linux-kernel@...r.kernel.org, linux-arm-kernel@...ts.infradead.org
Subject: Re: [PATCH 1/3] soc: amlogic: Add Meson GX Clock Measure driver
Hi Neil,
On Tue, Jul 3, 2018 at 3:23 PM Neil Armstrong <narmstrong@...libre.com> wrote:
>
> The Amlogic Meson GX SoCs embeds a clock measurer IP to measure the internal
> clock paths frequencies.
> The precision is in the order of the MHz.
>
> Signed-off-by: Neil Armstrong <narmstrong@...libre.com>
> ---
> drivers/soc/amlogic/Kconfig | 8 ++
> drivers/soc/amlogic/Makefile | 1 +
> drivers/soc/amlogic/meson-gx-clk-measure.c | 224 +++++++++++++++++++++++++++++
> 3 files changed, 233 insertions(+)
> create mode 100644 drivers/soc/amlogic/meson-gx-clk-measure.c
>
> diff --git a/drivers/soc/amlogic/Kconfig b/drivers/soc/amlogic/Kconfig
> index b04f6e4..4a3217d 100644
> --- a/drivers/soc/amlogic/Kconfig
> +++ b/drivers/soc/amlogic/Kconfig
> @@ -1,5 +1,13 @@
> menu "Amlogic SoC drivers"
>
> +config MESON_GX_CLK_MEASURE
> + bool "Amlogic Meson GX SoC Clock Measure driver"
> + depends on ARCH_MESON || COMPILE_TEST
> + default ARCH_MESON
> + help
> + Say yes to support of Measuring a set of internal SoC clocks
> + from the debugfs interface.
> +
> config MESON_GX_SOCINFO
> bool "Amlogic Meson GX SoC Information driver"
> depends on ARCH_MESON || COMPILE_TEST
> diff --git a/drivers/soc/amlogic/Makefile b/drivers/soc/amlogic/Makefile
> index 8fa3218..a0ad966 100644
> --- a/drivers/soc/amlogic/Makefile
> +++ b/drivers/soc/amlogic/Makefile
> @@ -1,3 +1,4 @@
> +obj-$(CONFIG_MESON_GX_CLK_MEASURE) += meson-gx-clk-measure.o
> obj-$(CONFIG_MESON_GX_SOCINFO) += meson-gx-socinfo.o
> obj-$(CONFIG_MESON_GX_PM_DOMAINS) += meson-gx-pwrc-vpu.o
> obj-$(CONFIG_MESON_MX_SOCINFO) += meson-mx-socinfo.o
> diff --git a/drivers/soc/amlogic/meson-gx-clk-measure.c b/drivers/soc/amlogic/meson-gx-clk-measure.c
> new file mode 100644
> index 0000000..434d9f3
> --- /dev/null
> +++ b/drivers/soc/amlogic/meson-gx-clk-measure.c
> @@ -0,0 +1,224 @@
> +// SPDX-License-Identifier: GPL-2.0+
> +/*
> + * Copyright (c) 2017 BayLibre, SAS
> + * Author: Neil Armstrong <narmstrong@...libre.com>
> + */
> +
> +#include <linux/of_address.h>
> +#include <linux/platform_device.h>
> +#include <linux/bitfield.h>
> +#include <linux/seq_file.h>
> +#include <linux/debugfs.h>
> +#include <linux/regmap.h>
> +
> +#define MSR_CLK_DUTY 0x0
> +#define MSR_CLK_REG0 0x4
> +#define MSR_CLK_REG1 0x8
> +#define MSR_CLK_REG2 0xc
> +
> +#define MSR_CLK_DIV GENMASK(15, 0)
> +#define MSR_ENABLE BIT(16)
> +#define MSR_CONT BIT(17) /* continuous measurement */
> +#define MSR_INTR BIT(18) /* interrupts */
> +#define MSR_RUN BIT(19)
> +#define MSR_CLK_SRC GENMASK(26, 20)
> +#define MSR_BUSY BIT(31)
> +
> +#define MSR_VAL_MASK GENMASK(15, 0)
> +
> +#define DIV_50US 64
> +
> +#define CLK_MSR_MAX 128
> +
> +struct meson_gx_msr {
> + struct regmap *regmap;
> +};
> +
> +struct meson_gx_msr_id {
> + struct meson_gx_msr *priv;
> + unsigned int id;
> + const char *name;
> +};
> +
> +#define CLK_MSR_ID(__id, __name) \
> + [__id] = {.id = __id, .name = __name,}
> +
> +static struct meson_gx_msr_id clk_msr[CLK_MSR_MAX] = {
> + CLK_MSR_ID(0, "ring_osc_out_ee_0"),
> + CLK_MSR_ID(1, "ring_osc_out_ee_1"),
> + CLK_MSR_ID(2, "ring_osc_out_ee_2"),
> + CLK_MSR_ID(3, "a53_ring_osc"),
> + CLK_MSR_ID(4, "gp0_pll"),
> + CLK_MSR_ID(6, "enci"),
> + CLK_MSR_ID(7, "clk81"),
> + CLK_MSR_ID(8, "encp"),
> + CLK_MSR_ID(9, "encl"),
> + CLK_MSR_ID(10, "vdac"),
> + CLK_MSR_ID(11, "rgmii_tx"),
> + CLK_MSR_ID(12, "pdm"),
> + CLK_MSR_ID(13, "amclk"),
> + CLK_MSR_ID(14, "fec_0"),
> + CLK_MSR_ID(15, "fec_1"),
> + CLK_MSR_ID(16, "fec_2"),
> + CLK_MSR_ID(17, "sys_pll_div16"),
> + CLK_MSR_ID(18, "sys_cpu_div16"),
> + CLK_MSR_ID(19, "hdmitx_sys"),
> + CLK_MSR_ID(20, "rtc_osc_out"),
> + CLK_MSR_ID(21, "i2s_in_src0"),
> + CLK_MSR_ID(22, "eth_phy_ref"),
> + CLK_MSR_ID(23, "hdmi_todig"),
> + CLK_MSR_ID(26, "sc_int"),
> + CLK_MSR_ID(28, "sar_adc"),
> + CLK_MSR_ID(31, "mpll_test_out"),
> + CLK_MSR_ID(32, "vdec"),
> + CLK_MSR_ID(35, "mali"),
> + CLK_MSR_ID(36, "hdmi_tx_pixel"),
> + CLK_MSR_ID(37, "i958"),
> + CLK_MSR_ID(38, "vdin_meas"),
> + CLK_MSR_ID(39, "pcm_sclk"),
> + CLK_MSR_ID(40, "pcm_mclk"),
> + CLK_MSR_ID(41, "eth_rx_or_rmii"),
> + CLK_MSR_ID(42, "mp0_out"),
> + CLK_MSR_ID(43, "fclk_div5"),
> + CLK_MSR_ID(44, "pwm_b"),
> + CLK_MSR_ID(45, "pwm_a"),
> + CLK_MSR_ID(46, "vpu"),
> + CLK_MSR_ID(47, "ddr_dpll_pt"),
> + CLK_MSR_ID(48, "mp1_out"),
> + CLK_MSR_ID(49, "mp2_out"),
> + CLK_MSR_ID(50, "mp3_out"),
> + CLK_MSR_ID(51, "nand_core"),
> + CLK_MSR_ID(52, "sd_emmc_b"),
> + CLK_MSR_ID(53, "sd_emmc_a"),
> + CLK_MSR_ID(55, "vid_pll_div_out"),
> + CLK_MSR_ID(56, "cci"),
> + CLK_MSR_ID(57, "wave420l_c"),
> + CLK_MSR_ID(58, "wave420l_b"),
AFAIK the Chips&Media WAVE420L video codec is only available on GXM (S912)
I assume reading this on GXBB or GXL simply reads 0?
> + CLK_MSR_ID(59, "hcodec"),
> + CLK_MSR_ID(60, "alt_32k"),
> + CLK_MSR_ID(61, "gpio_msr"),
> + CLK_MSR_ID(62, "hevc"),
> + CLK_MSR_ID(66, "vid_lock"),
> + CLK_MSR_ID(70, "pwm_f"),
> + CLK_MSR_ID(71, "pwm_e"),
> + CLK_MSR_ID(72, "pwm_d"),
> + CLK_MSR_ID(73, "pwm_C"),
should this be pwm_c (instead of pwm_C)?
> + CLK_MSR_ID(75, "aoclkx2_int"),
> + CLK_MSR_ID(76, "aoclk_int"),
> + CLK_MSR_ID(77, "rng_ring_osc_0"),
> + CLK_MSR_ID(78, "rng_ring_osc_1"),
> + CLK_MSR_ID(79, "rng_ring_osc_2"),
> + CLK_MSR_ID(80, "rng_ring_osc_3"),
> + CLK_MSR_ID(81, "vapb"),
> + CLK_MSR_ID(82, "ge2d"),
> +};
I did a quick check whether the clock IDs are really the same for all GX SoCs:
apart from clocks missing on older SoCs (see for example the WAVE420L
clocks above) there were only minor renames but no conflicts!
> +
> +static int meson_gx_measure_id(struct meson_gx_msr *priv, unsigned int id)
> +{
> + unsigned int val;
> + int ret;
> +
> + regmap_write(priv->regmap, MSR_CLK_REG0, 0);
> +
> + /* Set measurement gate to 50uS */
> + regmap_update_bits(priv->regmap, MSR_CLK_REG0, MSR_CLK_DIV,
> + FIELD_PREP(MSR_CLK_DIV, DIV_50US));
> +
> + /* Set ID */
> + regmap_update_bits(priv->regmap, MSR_CLK_REG0, MSR_CLK_SRC,
> + FIELD_PREP(MSR_CLK_SRC, id));
> +
> + /* Enable & Start */
> + regmap_update_bits(priv->regmap, MSR_CLK_REG0,
> + MSR_RUN | MSR_ENABLE,
> + MSR_RUN | MSR_ENABLE);
> +
> + ret = regmap_read_poll_timeout(priv->regmap, MSR_CLK_REG0,
> + val, !(val & MSR_BUSY), 10, 1000);
> + if (ret)
> + return ret;
> +
> + /* Disable */
> + regmap_update_bits(priv->regmap, MSR_CLK_REG0, MSR_ENABLE, 0);
> +
> + /* Get the value in MHz*64 */
> + regmap_read(priv->regmap, MSR_CLK_REG2, &val);
> +
> + return (((val + 31) & MSR_VAL_MASK) / 64) * 1000000;
> +}
> +
> +static int clk_msr_show(struct seq_file *s, void *data)
> +{
> + struct meson_gx_msr_id *clk_msr_id = s->private;
> + int val;
> +
> + val = meson_gx_measure_id(clk_msr_id->priv, clk_msr_id->id);
> + if (val < 0)
> + return val;
> +
> + seq_printf(s, "%d\n", val);
> +
> + return 0;
> +}
> +DEFINE_SHOW_ATTRIBUTE(clk_msr);
have you considered modelling this as clock driver instead?
> +
> +static const struct regmap_config clk_msr_regmap_config = {
> + .reg_bits = 32,
> + .val_bits = 32,
> + .reg_stride = 4,
> + .max_register = MSR_CLK_REG2,
> +};
> +
> +static int meson_gx_msr_probe(struct platform_device *pdev)
> +{
> + struct meson_gx_msr *priv;
> + struct resource *res;
> + struct dentry *root;
> + void __iomem *base;
> + int i;
> +
> + priv = devm_kzalloc(&pdev->dev, sizeof(struct meson_gx_msr),
> + GFP_KERNEL);
> + if (!priv)
> + return -ENOMEM;
> +
> + res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
> + base = devm_ioremap_resource(&pdev->dev, res);
> + if (IS_ERR(base)) {
> + dev_err(&pdev->dev, "io resource mapping failed\n");
> + return PTR_ERR(base);
> + }
> +
> + priv->regmap = devm_regmap_init_mmio(&pdev->dev, base,
> + &clk_msr_regmap_config);
> + if (IS_ERR(priv->regmap))
> + return PTR_ERR(priv->regmap);
> +
> + root = debugfs_create_dir("meson-clk-msr", NULL);
> +
> + for (i = 0 ; i < CLK_MSR_MAX ; ++i) {
> + if (!clk_msr[i].name)
> + continue;
> +
> + clk_msr[i].priv = priv;
> +
> + debugfs_create_file(clk_msr[i].name, 0444, root,
> + &clk_msr[i], &clk_msr_fops);
> + }
> +
> + return 0;
> +}
> +
> +static const struct of_device_id meson_gx_msr_match_table[] = {
> + { .compatible = "amlogic,meson-gx-clk-measure" },
maybe pass the meson_gx_msr_id table here because it seems easy to add
support for AXG and Meson8/Meson8b/Meson8m2 later on
Regards
Martin
View attachment "gxl.txt" of type "text/plain" (2460 bytes)
View attachment "gxbb-to-gxl.diff" of type "text/x-patch" (937 bytes)
View attachment "gxl-to-gxm.diff" of type "text/x-patch" (1012 bytes)
View attachment "gxm.txt" of type "text/plain" (2503 bytes)
View attachment "gxbb.txt" of type "text/plain" (2426 bytes)
Powered by blists - more mailing lists