linux-kernel - [PATCH v2 9/9] arm64: allwinner: dts: h6: enable USB3 port on Pine H64

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-Id: <20180706153805.25842-10-icenowy@aosc.io>
Date:   Fri,  6 Jul 2018 23:38:05 +0800
From:   Icenowy Zheng <icenowy@...c.io>
To:     Rob Herring <robh+dt@...nel.org>,
        Maxime Ripard <maxime.ripard@...tlin.com>,
        Chen-Yu Tsai <wens@...e.org>,
        Kishon Vijay Abraham I <kishon@...com>
Cc:     devicetree@...r.kernel.org, linux-arm-kernel@...ts.infradead.org,
        linux-kernel@...r.kernel.org, linux-sunxi@...glegroups.com,
        Icenowy Zheng <icenowy@...c.io>
Subject: [PATCH v2 9/9] arm64: allwinner: dts: h6: enable USB3 port on Pine H64

Pine H64 board have a USB3 port, which is connected to the USB3 pins of
the H6 SoC, and the 5V power supply is controlled via GPIO (shared with
the power USB ports).

Enable this port.

Signed-off-by: Icenowy Zheng <icenowy@...c.io>
---
Changes in v2:
- Rebased on top of the USB2 support patches.
- Dropped the enable of the dwc3-of-simple node.

 arch/arm64/boot/dts/allwinner/sun50i-h6-pine-h64.dts | 9 +++++++++
 1 file changed, 9 insertions(+)

diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h6-pine-h64.dts b/arch/arm64/boot/dts/allwinner/sun50i-h6-pine-h64.dts
index 104369228994..28eeb8dcfa35 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-h6-pine-h64.dts
+++ b/arch/arm64/boot/dts/allwinner/sun50i-h6-pine-h64.dts
@@ -51,6 +51,10 @@
 	};
 };
 
+&dwc3 {
+	status = "okay";
+};
+
 &ehci0 {
 	status = "okay";
 };
@@ -93,3 +97,8 @@
 	usb3_vbus-supply = <&reg_usb_vbus>;
 	status = "okay";
 };
+
+&usb3phy {
+	phy-supply = <&reg_usb_vbus>;
+	status = "okay";
+};
-- 
2.17.1