[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20180706193923.GC16084@piout.net>
Date: Fri, 6 Jul 2018 21:39:23 +0200
From: Alexandre Belloni <alexandre.belloni@...tlin.com>
To: Codrin Ciubotariu <codrin.ciubotariu@...rochip.com>
Cc: linux-arm-kernel@...ts.infradead.org, linux-kernel@...r.kernel.org,
devicetree@...r.kernel.org, linux-clk@...r.kernel.org,
alsa-devel@...a-project.org, nicolas.ferre@...rochip.com,
boris.brezillon@...tlin.com, robh+dt@...nel.org,
broonie@...nel.org, sboyd@...nel.org,
Cristian.Birsan@...rochip.com,
Cyrille Pitchen <cyrille.pitchen@...el.com>
Subject: Re: [PATCH v5 4/5] ARM: dts: at91: sama5d2: add nodes for I2S
controllers
Hi Codrin,
On 18/06/2018 17:12:38+0300, Codrin Ciubotariu wrote:
> From: Cyrille Pitchen <cyrille.pitchen@...el.com>
>
> This patch adds DT nodes for I2S0 and I2S1. It also adds an alias for
> each I2S node.
>
> Signed-off-by: Cyrille Pitchen <cyrille.pitchen@...el.com>
> [codrin.ciubotariu@...rochip.com: added phandle to new mux clock]
> Signed-off-by: Codrin Ciubotariu <codrin.ciubotariu@...rochip.com>
> ---
>
> The bindings for the I2S node are applied to broonie/sound.git .
>
> Changes in v5:
> - the previous name was:
> [PATCH v4 6/7] ARM: dts: at91: sama5d2: add nodes for I2S controllers
>
> arch/arm/boot/dts/sama5d2.dtsi | 34 ++++++++++++++++++++++++++++++++++
> 1 file changed, 34 insertions(+)
>
> diff --git a/arch/arm/boot/dts/sama5d2.dtsi b/arch/arm/boot/dts/sama5d2.dtsi
> index eeb6afa1cda7..eca73ce40bc5 100644
> --- a/arch/arm/boot/dts/sama5d2.dtsi
> +++ b/arch/arm/boot/dts/sama5d2.dtsi
> @@ -58,6 +58,8 @@
> serial1 = &uart3;
> tcb0 = &tcb0;
> tcb1 = &tcb1;
> + i2s0 = &i2s0;
> + i2s1 = &i2s1;
> };
>
> cpus {
> @@ -1313,6 +1315,22 @@
> clocks = <&clk32k>;
> };
>
> + i2s0: i2s@...50000 {
> + compatible = "atmel,sama5d2-i2s";
> + reg = <0xf8050000 0x100>;
> + interrupts = <54 IRQ_TYPE_LEVEL_HIGH 7>;
> + dmas = <&dma0
> + (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
> + AT91_XDMAC_DT_PERID(31))>,
> + <&dma0
> + (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
> + AT91_XDMAC_DT_PERID(32))>;
> + dma-names = "tx", "rx";
> + clocks = <&i2s0_clk>, <&i2s0_gclk>, <&audio_pll_pmc>, <&i2s0muxck>;
> + clock-names = "pclk", "gclk", "aclk", "muxclk";
> + status = "disabled";
> + };
> +
Can you resend the DTS patches after removing the unnecessary clocks?
Thanks,
--
Alexandre Belloni, Bootlin (formerly Free Electrons)
Embedded Linux and Kernel engineering
https://bootlin.com
Powered by blists - more mailing lists