[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <e056ed7d-521d-54ab-2e5d-0f5259a09ec6@microchip.com>
Date: Mon, 9 Jul 2018 16:29:43 +0300
From: Codrin Ciubotariu <codrin.ciubotariu@...rochip.com>
To: Alexandre Belloni <alexandre.belloni@...tlin.com>
CC: <linux-arm-kernel@...ts.infradead.org>,
<linux-kernel@...r.kernel.org>, <devicetree@...r.kernel.org>,
<linux-clk@...r.kernel.org>, <alsa-devel@...a-project.org>,
<nicolas.ferre@...rochip.com>, <boris.brezillon@...tlin.com>,
<robh+dt@...nel.org>, <broonie@...nel.org>, <sboyd@...nel.org>,
<Cristian.Birsan@...rochip.com>,
Cyrille Pitchen <cyrille.pitchen@...el.com>
Subject: Re: [PATCH v5 4/5] ARM: dts: at91: sama5d2: add nodes for I2S
controllers
On 06.07.2018 22:39, Alexandre Belloni wrote:
> Hi Codrin,
>
> On 18/06/2018 17:12:38+0300, Codrin Ciubotariu wrote:
>> From: Cyrille Pitchen <cyrille.pitchen@...el.com>
>>
>> This patch adds DT nodes for I2S0 and I2S1. It also adds an alias for
>> each I2S node.
>>
>> Signed-off-by: Cyrille Pitchen <cyrille.pitchen@...el.com>
>> [codrin.ciubotariu@...rochip.com: added phandle to new mux clock]
>> Signed-off-by: Codrin Ciubotariu <codrin.ciubotariu@...rochip.com>
>> ---
>>
>> The bindings for the I2S node are applied to broonie/sound.git .
>>
>> Changes in v5:
>> - the previous name was:
>> [PATCH v4 6/7] ARM: dts: at91: sama5d2: add nodes for I2S controllers
>>
>> arch/arm/boot/dts/sama5d2.dtsi | 34 ++++++++++++++++++++++++++++++++++
>> 1 file changed, 34 insertions(+)
>>
>> diff --git a/arch/arm/boot/dts/sama5d2.dtsi b/arch/arm/boot/dts/sama5d2.dtsi
>> index eeb6afa1cda7..eca73ce40bc5 100644
>> --- a/arch/arm/boot/dts/sama5d2.dtsi
>> +++ b/arch/arm/boot/dts/sama5d2.dtsi
>> @@ -58,6 +58,8 @@
>> serial1 = &uart3;
>> tcb0 = &tcb0;
>> tcb1 = &tcb1;
>> + i2s0 = &i2s0;
>> + i2s1 = &i2s1;
>> };
>>
>> cpus {
>> @@ -1313,6 +1315,22 @@
>> clocks = <&clk32k>;
>> };
>>
>> + i2s0: i2s@...50000 {
>> + compatible = "atmel,sama5d2-i2s";
>> + reg = <0xf8050000 0x100>;
>> + interrupts = <54 IRQ_TYPE_LEVEL_HIGH 7>;
>> + dmas = <&dma0
>> + (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
>> + AT91_XDMAC_DT_PERID(31))>,
>> + <&dma0
>> + (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
>> + AT91_XDMAC_DT_PERID(32))>;
>> + dma-names = "tx", "rx";
>> + clocks = <&i2s0_clk>, <&i2s0_gclk>, <&audio_pll_pmc>, <&i2s0muxck>;
>> + clock-names = "pclk", "gclk", "aclk", "muxclk";
>> + status = "disabled";
>> + };
>> +
>
> Can you resend the DTS patches after removing the unnecessary clocks?
I will. Should I also make the "muxclk" clock an assigned clock to
assign its parent ?
Thanks and best regards,
Codrin
Powered by blists - more mailing lists