[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20180709154848.5401-8-stefan@agner.ch>
Date: Mon, 9 Jul 2018 17:48:48 +0200
From: Stefan Agner <stefan@...er.ch>
To: shawnguo@...nel.org, s.hauer@...gutronix.de
Cc: kernel@...gutronix.de, fabio.estevam@....com, linux-imx@....com,
robh+dt@...nel.org, mark.rutland@....com,
marcel.ziswiler@...adex.com, max.krummenacher@...adex.com,
maitysanchayan@...il.com, linux-arm-kernel@...ts.infradead.org,
devicetree@...r.kernel.org, linux-kernel@...r.kernel.org,
Stefan Agner <stefan@...er.ch>
Subject: [PATCH 8/8] ARM: dts: imx6qdl-apalis/-colibri: remove unused pinctrl groups
100/200MHz states for USDHC3 are not required since the SoC
does not support modes faster than DDR52 for the on board eMMC.
Signed-off-by: Stefan Agner <stefan@...er.ch>
---
arch/arm/boot/dts/imx6qdl-apalis.dtsi | 34 --------------------------
arch/arm/boot/dts/imx6qdl-colibri.dtsi | 34 --------------------------
2 files changed, 68 deletions(-)
diff --git a/arch/arm/boot/dts/imx6qdl-apalis.dtsi b/arch/arm/boot/dts/imx6qdl-apalis.dtsi
index 8c04f42fdb71..05f07ea3e8c8 100644
--- a/arch/arm/boot/dts/imx6qdl-apalis.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-apalis.dtsi
@@ -947,38 +947,4 @@
MX6QDL_PAD_SD3_RST__SD3_RESET 0x17059
>;
};
-
- pinctrl_usdhc3_100mhz: usdhc3100mhzgrp {
- fsl,pins = <
- MX6QDL_PAD_SD3_CMD__SD3_CMD 0x170b9
- MX6QDL_PAD_SD3_CLK__SD3_CLK 0x100b9
- MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x170b9
- MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x170b9
- MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x170b9
- MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x170b9
- MX6QDL_PAD_SD3_DAT4__SD3_DATA4 0x170b9
- MX6QDL_PAD_SD3_DAT5__SD3_DATA5 0x170b9
- MX6QDL_PAD_SD3_DAT6__SD3_DATA6 0x170b9
- MX6QDL_PAD_SD3_DAT7__SD3_DATA7 0x170b9
- /* eMMC reset */
- MX6QDL_PAD_SD3_RST__SD3_RESET 0x170b9
- >;
- };
-
- pinctrl_usdhc3_200mhz: usdhc3200mhzgrp {
- fsl,pins = <
- MX6QDL_PAD_SD3_CMD__SD3_CMD 0x170f9
- MX6QDL_PAD_SD3_CLK__SD3_CLK 0x100f9
- MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x170f9
- MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x170f9
- MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x170f9
- MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x170f9
- MX6QDL_PAD_SD3_DAT4__SD3_DATA4 0x170f9
- MX6QDL_PAD_SD3_DAT5__SD3_DATA5 0x170f9
- MX6QDL_PAD_SD3_DAT6__SD3_DATA6 0x170f9
- MX6QDL_PAD_SD3_DAT7__SD3_DATA7 0x170f9
- /* eMMC reset */
- MX6QDL_PAD_SD3_RST__SD3_RESET 0x170f9
- >;
- };
};
diff --git a/arch/arm/boot/dts/imx6qdl-colibri.dtsi b/arch/arm/boot/dts/imx6qdl-colibri.dtsi
index 6821ea511051..87e15e7cb32b 100644
--- a/arch/arm/boot/dts/imx6qdl-colibri.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-colibri.dtsi
@@ -692,40 +692,6 @@
>;
};
- pinctrl_usdhc3_100mhz: usdhc3100mhzgrp {
- fsl,pins = <
- MX6QDL_PAD_SD3_CMD__SD3_CMD 0x170b9
- MX6QDL_PAD_SD3_CLK__SD3_CLK 0x100b9
- MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x170b9
- MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x170b9
- MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x170b9
- MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x170b9
- MX6QDL_PAD_SD3_DAT4__SD3_DATA4 0x170b9
- MX6QDL_PAD_SD3_DAT5__SD3_DATA5 0x170b9
- MX6QDL_PAD_SD3_DAT6__SD3_DATA6 0x170b9
- MX6QDL_PAD_SD3_DAT7__SD3_DATA7 0x170b9
- /* eMMC reset */
- MX6QDL_PAD_SD3_RST__SD3_RESET 0x170b9
- >;
- };
-
- pinctrl_usdhc3_200mhz: usdhc3200mhzgrp {
- fsl,pins = <
- MX6QDL_PAD_SD3_CMD__SD3_CMD 0x170f9
- MX6QDL_PAD_SD3_CLK__SD3_CLK 0x100f9
- MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x170f9
- MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x170f9
- MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x170f9
- MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x170f9
- MX6QDL_PAD_SD3_DAT4__SD3_DATA4 0x170f9
- MX6QDL_PAD_SD3_DAT5__SD3_DATA5 0x170f9
- MX6QDL_PAD_SD3_DAT6__SD3_DATA6 0x170f9
- MX6QDL_PAD_SD3_DAT7__SD3_DATA7 0x170f9
- /* eMMC reset */
- MX6QDL_PAD_SD3_RST__SD3_RESET 0x170f9
- >;
- };
-
pinctrl_weim_cs0: weimcs0grp {
fsl,pins = <
/* nEXT_CS0 */
--
2.18.0
Powered by blists - more mailing lists