| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <CAJZ5v0g0NwkLmd=tJ0sT4pc8FJSRE8sEu5GRQ7KUUd+YedzjMg@mail.gmail.com>
Date: Wed, 11 Jul 2018 22:36:09 +0200
From: "Rafael J. Wysocki" <rafael@...nel.org>
To: Marek Szyprowski <m.szyprowski@...sung.com>
Cc: Tomasz Figa <tfiga@...omium.org>,
"Rafael J. Wysocki" <rafael@...nel.org>,
Vivek Gautam <vivek.gautam@...eaurora.org>,
"Rafael J. Wysocki" <rjw@...ysocki.net>,
"list@....net:IOMMU DRIVERS" <iommu@...ts.linux-foundation.org>,
Joerg Roedel <joro@...tes.org>,
Rob Herring <robh+dt@...nel.org>,
Mark Rutland <mark.rutland@....com>,
Robin Murphy <robin.murphy@....com>,
Will Deacon <will.deacon@....com>,
"devicetree@...r.kernel.org" <devicetree@...r.kernel.org>,
Linux Kernel Mailing List <linux-kernel@...r.kernel.org>,
Alex Williamson <alex.williamson@...hat.com>,
Rob Clark <robdclark@...il.com>,
Linux PM <linux-pm@...r.kernel.org>,
freedreno <freedreno@...ts.freedesktop.org>,
Stephen Boyd <sboyd@...nel.org>,
Sricharan R <sricharan@...eaurora.org>,
Archit Taneja <architt@...eaurora.org>,
linux-arm-msm <linux-arm-msm@...r.kernel.org>,
Jordan Crouse <jcrouse@...eaurora.org>
Subject: Re: [PATCH v12 1/4] iommu/arm-smmu: Add pm_runtime/sleep ops
On Wed, Jul 11, 2018 at 3:40 PM, Marek Szyprowski
<m.szyprowski@...sung.com> wrote:
> Hi Tomasz,
>
> On 2018-07-11 14:51, Tomasz Figa wrote:
>> On Wed, Jul 11, 2018 at 8:11 PM Rafael J. Wysocki <rafael@...nel.org> wrote:
>>> On Wed, Jul 11, 2018 at 12:55 PM, Vivek Gautam
>>> <vivek.gautam@...eaurora.org> wrote:
>>>> On Wed, Jul 11, 2018 at 3:20 PM, Rafael J. Wysocki <rjw@...ysocki.net> wrote:
>>>>> On Sunday, July 8, 2018 7:34:10 PM CEST Vivek Gautam wrote:
>>>>>> From: Sricharan R <sricharan@...eaurora.org>
>>>>>>
>>>>>> The smmu needs to be functional only when the respective
>>>>>> master's using it are active. The device_link feature
>>>>>> helps to track such functional dependencies, so that the
>>>>>> iommu gets powered when the master device enables itself
>>>>>> using pm_runtime. So by adapting the smmu driver for
>>>>>> runtime pm, above said dependency can be addressed.
>>>>>>
>>>>>> This patch adds the pm runtime/sleep callbacks to the
>>>>>> driver and also the functions to parse the smmu clocks
>>>>>> from DT and enable them in resume/suspend.
>>>>>>
>>>>>> Signed-off-by: Sricharan R <sricharan@...eaurora.org>
>>>>>> Signed-off-by: Archit Taneja <architt@...eaurora.org>
>>>>>> [vivek: Clock rework to request bulk of clocks]
>>>>>> Signed-off-by: Vivek Gautam <vivek.gautam@...eaurora.org>
>>>>>> Reviewed-by: Tomasz Figa <tfiga@...omium.org>
>>>>>> ---
>>>>>>
>>>>>> - No change since v11.
>>>>>>
>>>>>> drivers/iommu/arm-smmu.c | 60 ++++++++++++++++++++++++++++++++++++++++++++++--
>>>>>> 1 file changed, 58 insertions(+), 2 deletions(-)
>>>>>>
>>>>>> diff --git a/drivers/iommu/arm-smmu.c b/drivers/iommu/arm-smmu.c
>>>>>> index f7a96bcf94a6..a01d0dde21dd 100644
>>>>>> --- a/drivers/iommu/arm-smmu.c
>>>>>> +++ b/drivers/iommu/arm-smmu.c
>>>>>> @@ -48,6 +48,7 @@
>>>>>> #include <linux/of_iommu.h>
>>>>>> #include <linux/pci.h>
>>>>>> #include <linux/platform_device.h>
>>>>>> +#include <linux/pm_runtime.h>
>>>>>> #include <linux/slab.h>
>>>>>> #include <linux/spinlock.h>
>>>>>>
>>>>>> @@ -205,6 +206,8 @@ struct arm_smmu_device {
>>>>>> u32 num_global_irqs;
>>>>>> u32 num_context_irqs;
>>>>>> unsigned int *irqs;
>>>>>> + struct clk_bulk_data *clks;
>>>>>> + int num_clks;
>>>>>>
>>>>>> u32 cavium_id_base; /* Specific to Cavium */
>>>>>>
>>>>>> @@ -1897,10 +1900,12 @@ static int arm_smmu_device_cfg_probe(struct arm_smmu_device *smmu)
>>>>>> struct arm_smmu_match_data {
>>>>>> enum arm_smmu_arch_version version;
>>>>>> enum arm_smmu_implementation model;
>>>>>> + const char * const *clks;
>>>>>> + int num_clks;
>>>>>> };
>>>>>>
>>>>>> #define ARM_SMMU_MATCH_DATA(name, ver, imp) \
>>>>>> -static struct arm_smmu_match_data name = { .version = ver, .model = imp }
>>>>>> +static const struct arm_smmu_match_data name = { .version = ver, .model = imp }
>>>>>>
>>>>>> ARM_SMMU_MATCH_DATA(smmu_generic_v1, ARM_SMMU_V1, GENERIC_SMMU);
>>>>>> ARM_SMMU_MATCH_DATA(smmu_generic_v2, ARM_SMMU_V2, GENERIC_SMMU);
>>>>>> @@ -1919,6 +1924,23 @@ static const struct of_device_id arm_smmu_of_match[] = {
>>>>>> };
>>>>>> MODULE_DEVICE_TABLE(of, arm_smmu_of_match);
>>>>>>
>>>>>> +static void arm_smmu_fill_clk_data(struct arm_smmu_device *smmu,
>>>>>> + const char * const *clks)
>>>>>> +{
>>>>>> + int i;
>>>>>> +
>>>>>> + if (smmu->num_clks < 1)
>>>>>> + return;
>>>>>> +
>>>>>> + smmu->clks = devm_kcalloc(smmu->dev, smmu->num_clks,
>>>>>> + sizeof(*smmu->clks), GFP_KERNEL);
>>>>>> + if (!smmu->clks)
>>>>>> + return;
>>>>>> +
>>>>>> + for (i = 0; i < smmu->num_clks; i++)
>>>>>> + smmu->clks[i].id = clks[i];
>>>>>> +}
>>>>>> +
>>>>>> #ifdef CONFIG_ACPI
>>>>>> static int acpi_smmu_get_data(u32 model, struct arm_smmu_device *smmu)
>>>>>> {
>>>>>> @@ -2001,6 +2023,9 @@ static int arm_smmu_device_dt_probe(struct platform_device *pdev,
>>>>>> data = of_device_get_match_data(dev);
>>>>>> smmu->version = data->version;
>>>>>> smmu->model = data->model;
>>>>>> + smmu->num_clks = data->num_clks;
>>>>>> +
>>>>>> + arm_smmu_fill_clk_data(smmu, data->clks);
>>>>>>
>>>>>> parse_driver_options(smmu);
>>>>>>
>>>>>> @@ -2099,6 +2124,14 @@ static int arm_smmu_device_probe(struct platform_device *pdev)
>>>>>> smmu->irqs[i] = irq;
>>>>>> }
>>>>>>
>>>>>> + err = devm_clk_bulk_get(smmu->dev, smmu->num_clks, smmu->clks);
>>>>>> + if (err)
>>>>>> + return err;
>>>>>> +
>>>>>> + err = clk_bulk_prepare(smmu->num_clks, smmu->clks);
>>>>>> + if (err)
>>>>>> + return err;
>>>>>> +
>>>>>> err = arm_smmu_device_cfg_probe(smmu);
>>>>>> if (err)
>>>>>> return err;
>>>>>> @@ -2181,6 +2214,9 @@ static int arm_smmu_device_remove(struct platform_device *pdev)
>>>>>>
>>>>>> /* Turn the thing off */
>>>>>> writel(sCR0_CLIENTPD, ARM_SMMU_GR0_NS(smmu) + ARM_SMMU_GR0_sCR0);
>>>>>> +
>>>>>> + clk_bulk_unprepare(smmu->num_clks, smmu->clks);
>>>>>> +
>>>>>> return 0;
>>>>>> }
>>>>>>
>>>>>> @@ -2197,7 +2233,27 @@ static int __maybe_unused arm_smmu_pm_resume(struct device *dev)
>>>>>> return 0;
>>>>>> }
>>>>>>
>>>>>> -static SIMPLE_DEV_PM_OPS(arm_smmu_pm_ops, NULL, arm_smmu_pm_resume);
>>>>>> +static int __maybe_unused arm_smmu_runtime_resume(struct device *dev)
>>>>>> +{
>>>>>> + struct arm_smmu_device *smmu = dev_get_drvdata(dev);
>>>>>> +
>>>>>> + return clk_bulk_enable(smmu->num_clks, smmu->clks);
>>>>>> +}
>>>>>> +
>>>>>> +static int __maybe_unused arm_smmu_runtime_suspend(struct device *dev)
>>>>>> +{
>>>>>> + struct arm_smmu_device *smmu = dev_get_drvdata(dev);
>>>>>> +
>>>>>> + clk_bulk_disable(smmu->num_clks, smmu->clks);
>>>>>> +
>>>>>> + return 0;
>>>>>> +}
>>>>>> +
>>>>>> +static const struct dev_pm_ops arm_smmu_pm_ops = {
>>>>>> + SET_SYSTEM_SLEEP_PM_OPS(NULL, arm_smmu_pm_resume)
>>>>> This is suspicious.
>>>>>
>>>>> If you need a runtime suspend method, why do you think that it is not necessary
>>>>> to suspend the device during system-wide transitions?
>>>> Okay, so you suggest to put clock disabling in say arm_smmu_pm_suspend()?
>>>> In that case the clocks have to be enabled in the resume path too.
>>>>
>>>> I remember Tomasz pointed to that we shouldn't need clock enable in resume
>>>> path [1].
>>>>
>>>> [1] https://lkml.org/lkml/2018/3/15/60
>> That was an answer for a different question. I don't remember
>> suggesting having no suspend function. Although, given the PM
>> subsystem internals, the suspend function wouldn't be called on SMMU
>> implementation needed power control (since they would have runtime PM
>> enabled) and on others, it would be called but do nothing (since no
>> clocks).
>>
>>> Honestly, I just don't know. :-)
>>>
>>> It just looks odd the way it is done. I think the clock should be
>>> gated during system-wide suspend too, because the system can spend
>>> much more time in a sleep state than in the working state, on average.
>>>
>>> And note that you cannot rely on runtime PM to always do it for you,
>>> because it may be disabled at a client device or even blocked by user
>>> space via power/control in sysfs and that shouldn't matter for
>>> system-wide PM.
>> User space blocking runtime PM through sysfs is a good point. I'm not
>> 100% sure how the PM subsystem deals with that in case of system-wide
>> suspend. I guess for consistency and safety, we should have the
>> suspend callback.
>
> Frankly, if there are no other reasons I suggest to wire system
> suspend/resume to pm_runtime_force_* helpers:
> SET_SYSTEM_SLEEP_PM_OPS(pm_runtime_force_suspend,
> pm_runtime_force_resume).
Not a good idea at all IMO.
Use PM driver flags rather I'd say.
> This way you will have everything related to suspending and resuming in
> one place and you would not need to bother about all possible cases (like
> suspending from runtime pm active and suspending from runtime pm suspended
> cases as well as restoring proper device state on resume). This is
> especially important in recent kernel releases, where devices are
> system-suspended regardless their runtime pm states (in older kernels
> devices were first runtime resumed for system suspend, what made code
> simpler, but wasn't best from power consumption perspective).
>
> If you go this way, You only need to ensure that runtime resume will also
> restore proper device state besides enabling all the clocks. This will
> also prepare your driver to properly operate inside power domain, where it
> is possible for device to loose its internal state after runtime suspend
> when respective power domain has been turned off.
I'm not sure if you are aware of the pm_runtime_force_* limitations, though.
Thanks,
Rafael
Powered by blists - more mailing lists