linux-kernel - Re: [PATCH 0/3] clk: meson: clk-pll driver update

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <CAFBinCC4CO_C_f9LLTnLmzVJ6-C-w8J0JQ0e6F9Jh_h61bGEKQ@mail.gmail.com>
Date:   Sat, 21 Jul 2018 22:17:25 +0200
From:   Martin Blumenstingl <martin.blumenstingl@...glemail.com>
To:     jbrunet@...libre.com
Cc:     Neil Armstrong <narmstrong@...libre.com>,
        linux-amlogic@...ts.infradead.org, linux-clk@...r.kernel.org,
        linux-kernel@...r.kernel.org, khilman@...libre.com
Subject: Re: [PATCH 0/3] clk: meson: clk-pll driver update

Hi Jerome,

On Tue, Jul 17, 2018 at 11:56 AM Jerome Brunet <jbrunet@...libre.com> wrote:
>
> This patchset is yet another round of update to the amlogic pll driver.
>
>  1) Enable bit is added so we don't rely on the bootloader or the init
>     value to enable to pll device.
>  2) OD post dividers are removed from the pll driver. This simplify the
>     driver and let us provide the clocks which exist between those
>     dividera. Some device are actually using these clocks.
>  3) The rates hard coded in parameter tables are remove. Instead, we
>     only rely on the parent rate and the parameters to calculate the
>     output rate, which is a lot better.
>
> This series has been tested on the gxl libretech cc and axg s400.
> I did not test it on meson8b yet.
I had some comments on patch #2
once that is fixed I can help testing on Meson8b (if you give me a few days...)


Regards
Martin