[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <1533141150-10511-17-git-send-email-avienamo@nvidia.com>
Date: Wed, 1 Aug 2018 19:32:06 +0300
From: Aapo Vienamo <avienamo@...dia.com>
To: Rob Herring <robh+dt@...nel.org>,
Mark Rutland <mark.rutland@....com>,
Thierry Reding <thierry.reding@...il.com>,
Jonathan Hunter <jonathanh@...dia.com>,
Ulf Hansson <ulf.hansson@...aro.org>,
Adrian Hunter <adrian.hunter@...el.com>,
Mikko Perttunen <mperttunen@...dia.com>,
Stefan Agner <stefan@...er.ch>
CC: <devicetree@...r.kernel.org>, <linux-tegra@...r.kernel.org>,
<linux-kernel@...r.kernel.org>, <linux-mmc@...r.kernel.org>,
Aapo Vienamo <avienamo@...dia.com>
Subject: [PATCH 16/40] mmc: tegra: Disable card clock during pad calibration
Disable the card clock during automatic pad drive strength calibration
and re-enable it afterwards.
Signed-off-by: Aapo Vienamo <avienamo@...dia.com>
---
drivers/mmc/host/sdhci-tegra.c | 26 ++++++++++++++++++++++++++
1 file changed, 26 insertions(+)
diff --git a/drivers/mmc/host/sdhci-tegra.c b/drivers/mmc/host/sdhci-tegra.c
index 9e22fec..c2b388b 100644
--- a/drivers/mmc/host/sdhci-tegra.c
+++ b/drivers/mmc/host/sdhci-tegra.c
@@ -260,11 +260,35 @@ static void tegra_sdhci_configure_cal_pad(struct sdhci_host *host, bool enable)
}
}
+static bool tegra_sdhci_configure_card_clk(struct sdhci_host *host, bool enable)
+{
+ bool orig_enabled;
+ u32 reg;
+
+ reg = sdhci_readw(host, SDHCI_CLOCK_CONTROL);
+ orig_enabled = !!(reg & SDHCI_CLOCK_CARD_EN);
+
+ if (orig_enabled == enable)
+ return orig_enabled;
+
+ if (enable)
+ reg |= SDHCI_CLOCK_CARD_EN;
+ else
+ reg &= ~SDHCI_CLOCK_CARD_EN;
+
+ sdhci_writew(host, reg, SDHCI_CLOCK_CONTROL);
+
+ return orig_enabled;
+}
+
static void tegra_sdhci_pad_autocalib(struct sdhci_host *host)
{
+ bool card_clk_enabled;
u32 reg;
int ret;
+ card_clk_enabled = tegra_sdhci_configure_card_clk(host, false);
+
tegra_sdhci_configure_cal_pad(host, true);
reg = sdhci_readl(host, SDHCI_TEGRA_AUTO_CAL_CONFIG);
@@ -278,6 +302,8 @@ static void tegra_sdhci_pad_autocalib(struct sdhci_host *host)
tegra_sdhci_configure_cal_pad(host, false);
+ tegra_sdhci_configure_card_clk(host, card_clk_enabled);
+
if (ret)
dev_err(mmc_dev(host->mmc), "Pad autocal timed out\n");
}
--
2.7.4
Powered by blists - more mailing lists