[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20180803030237.3366-4-songjun.wu@linux.intel.com>
Date: Fri, 3 Aug 2018 11:02:22 +0800
From: Songjun Wu <songjun.wu@...ux.intel.com>
To: hua.ma@...ux.intel.com, yixin.zhu@...ux.intel.com,
chuanhua.lei@...ux.intel.com, qi-ming.wu@...el.com
Cc: linux-mips@...ux-mips.org, linux-clk@...r.kernel.org,
linux-serial@...r.kernel.org, devicetree@...r.kernel.org,
Songjun Wu <songjun.wu@...ux.intel.com>,
Michael Turquette <mturquette@...libre.com>,
Stephen Boyd <sboyd@...nel.org>, linux-kernel@...r.kernel.org,
Rob Herring <robh+dt@...nel.org>,
Mark Rutland <mark.rutland@....com>
Subject: [PATCH v2 03/18] dt-bindings: clk: Add documentation of grx500 clock controller
From: Yixin Zhu <yixin.zhu@...ux.intel.com>
This patch adds binding documentation for grx500 clock controller.
Signed-off-by: YiXin Zhu <yixin.zhu@...ux.intel.com>
Signed-off-by: Songjun Wu <songjun.wu@...ux.intel.com>
---
Changes in v2:
- Rewrite clock driver's dt-binding document according to Rob Herring's
comments.
- Simplify device tree docoment, remove some clock description.
.../devicetree/bindings/clock/intel,grx500-clk.txt | 39 ++++++++++++++++++++++
1 file changed, 39 insertions(+)
create mode 100644 Documentation/devicetree/bindings/clock/intel,grx500-clk.txt
diff --git a/Documentation/devicetree/bindings/clock/intel,grx500-clk.txt b/Documentation/devicetree/bindings/clock/intel,grx500-clk.txt
new file mode 100644
index 000000000000..e54e1dad9196
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/intel,grx500-clk.txt
@@ -0,0 +1,39 @@
+Device Tree Clock bindings for grx500 PLL controller.
+
+This binding uses the common clock binding:
+ Documentation/devicetree/bindings/clock/clock-bindings.txt
+
+The grx500 clock controller supplies clock to various controllers within the
+SoC.
+
+Required properties for clock node
+- compatible: Should be "intel,grx500-cgu".
+- reg: physical base address of the controller and length of memory range.
+- #clock-cells: should be 1.
+
+Optional Propteries:
+- intel,osc-frequency: frequency of the osc clock.
+if missing, driver will use clock rate defined in the driver.
+
+Example: Clock controller node:
+
+ cgu: cgu@...00000 {
+ compatible = "intel,grx500-cgu", "syscon";
+ reg = <0x16200000 0x200>;
+ #clock-cells = <1>;
+ };
+
+
+Example: UART controller node that consumes the clock generated by clock
+ controller.
+
+ asc0: serial@...00000 {
+ compatible = "lantiq,asc";
+ reg = <0x16600000 0x100000>;
+ interrupt-parent = <&gic>;
+ interrupts = <GIC_SHARED 103 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SHARED 105 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SHARED 106 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cgu CLK_SSX4>, <&cgu GCLK_UART>;
+ clock-names = "freq", "asc";
+ };
--
2.11.0
Powered by blists - more mailing lists