linux-kernel - Re: [PATCH v8 21/22] KVM: s390: CPU model support for AP virtualization

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <58eed530-31b3-49fe-cbd7-4d101b94daa0@redhat.com>
Date:   Thu, 9 Aug 2018 10:17:21 +0200
From:   David Hildenbrand <david@...hat.com>
To:     Tony Krowiak <akrowiak@...ux.vnet.ibm.com>,
        linux-s390@...r.kernel.org, linux-kernel@...r.kernel.org,
        kvm@...r.kernel.org
Cc:     freude@...ibm.com, schwidefsky@...ibm.com,
        heiko.carstens@...ibm.com, borntraeger@...ibm.com,
        cohuck@...hat.com, kwankhede@...dia.com,
        bjsdjshi@...ux.vnet.ibm.com, pbonzini@...hat.com,
        alex.williamson@...hat.com, pmorel@...ux.vnet.ibm.com,
        alifm@...ux.vnet.ibm.com, mjrosato@...ux.vnet.ibm.com,
        jjherne@...ux.vnet.ibm.com, thuth@...hat.com,
        pasic@...ux.vnet.ibm.com, berrange@...hat.com,
        fiuczy@...ux.vnet.ibm.com, buendgen@...ibm.com,
        frankja@...ux.ibm.com, Tony Krowiak <akrowiak@...ux.ibm.com>
Subject: Re: [PATCH v8 21/22] KVM: s390: CPU model support for AP
 virtualization

On 08.08.2018 16:44, Tony Krowiak wrote:
> From: Tony Krowiak <akrowiak@...ux.ibm.com>
> 
> Introduces a new CPU model feature and two CPU model
> facilities to support AP virtualization for KVM guests.
> 
> CPU model feature:
> 
> The KVM_S390_VM_CPU_FEAT_AP feature indicates that
> AP instructions are available on the guest. This
> feature will be enabled by the kernel only if the AP
> instructions are installed on the linux host. This feature
> must be specifically turned on for the KVM guest from
> userspace to use the VFIO AP device driver for guest
> access to AP devices.
> 
> CPU model facilities:
> 
> 1. AP Query Configuration Information (QCI) facility is installed.
> 
>    This is indicated by setting facilities bit 12 for
>    the guest. The kernel will not enable this facility
>    for the guest if it is not set on the host. This facility
>    must not be set by userspace if the KVM_S390_VM_CPU_FEAT_AP
>    feature is not installed.

Could it happen on real HW (not frankenstein CPU models), that

!AP, but STFL 12 or 15  are indicated?

> 
>    If this facility is not set for the KVM guest, then only
>    APQNs with an APQI less than 16 will be used by a Linux
>    guest regardless of the matrix configuration for the virtual
>    machine. This is a limitation of the Linux AP bus.
> 
> 2. AP Facilities Test facility (APFT) is installed.
> 
>    This is indicated by setting facilities bit 15 for
>    the guest. The kernel will not enable this facility for
>    the guest if it is not set on the host. This facility
>    must not be set by userspace if the KVM_S390_VM_CPU_FEAT_AP
>    feature is not installed.
> 
>    If this facility is not set for the KVM guest, then no
>    AP devices will be available to the guest regardless of
>    the guest's matrix configuration for the virtual
>    machine. This is a limitation of the Linux AP bus.
> 
> Signed-off-by: Tony Krowiak <akrowiak@...ux.ibm.com>
> Reviewed-by: Christian Borntraeger <borntraeger@...ibm.com>
> Reviewed-by: Halil Pasic <pasic@...ux.ibm.com>
> Tested-by: Michael Mueller <mimu@...ux.ibm.com>
> Tested-by: Farhan Ali <alifm@...ux.ibm.com>
> Signed-off-by: Christian Borntraeger <borntraeger@...ibm.com>
> ---
>  arch/s390/kvm/kvm-s390.c         |    7 +++++++
>  arch/s390/tools/gen_facilities.c |    2 ++
>  2 files changed, 9 insertions(+), 0 deletions(-)
> 
> diff --git a/arch/s390/kvm/kvm-s390.c b/arch/s390/kvm/kvm-s390.c
> index 9203f0b..7d4fe9b 100644
> --- a/arch/s390/kvm/kvm-s390.c
> +++ b/arch/s390/kvm/kvm-s390.c
> @@ -367,6 +367,13 @@ static void kvm_s390_cpu_feat_init(void)
>  
>  	if (MACHINE_HAS_ESOP)
>  		allow_cpu_feat(KVM_S390_VM_CPU_FEAT_ESOP);
> +
> +	/*
> +	 * Check if AP instructions installed on host
> +	 */

Make this a one-line comment, please.

> +	if (ap_instructions_available() == 0)
> +		allow_cpu_feat(KVM_S390_VM_CPU_FEAT_AP);
> +
>  	/*
>  	 * We need SIE support, ESOP (PROT_READ protection for gmap_shadow),
>  	 * 64bit SCAO (SCA passthrough) and IDTE (for gmap_shadow unshadowing).
> diff --git a/arch/s390/tools/gen_facilities.c b/arch/s390/tools/gen_facilities.c
> index 90a8c9e..a52290b 100644
> --- a/arch/s390/tools/gen_facilities.c
> +++ b/arch/s390/tools/gen_facilities.c
> @@ -106,6 +106,8 @@ struct facility_def {
>  
>  		.name = "FACILITIES_KVM_CPUMODEL",
>  		.bits = (int[]){
> +			12, /* AP Query Configuration Information */
> +			15, /* AP Facilities Test */
>  			-1  /* END */
>  		}
>  	},
> 


-- 

Thanks,

David / dhildenb