lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Date:   Fri, 10 Aug 2018 21:13:57 +0300
From:   Aapo Vienamo <avienamo@...dia.com>
To:     Ulf Hansson <ulf.hansson@...aro.org>,
        Rob Herring <robh+dt@...nel.org>,
        Mark Rutland <mark.rutland@....com>,
        Thierry Reding <thierry.reding@...il.com>,
        Jonathan Hunter <jonathanh@...dia.com>,
        Adrian Hunter <adrian.hunter@...el.com>,
        Mikko Perttunen <mperttunen@...dia.com>
CC:     <linux-mmc@...r.kernel.org>, <devicetree@...r.kernel.org>,
        <linux-tegra@...r.kernel.org>, <linux-kernel@...r.kernel.org>,
        Aapo Vienamo <avienamo@...dia.com>
Subject: [PATCH v2 0/8] Tegra SDHCI support HS400 on Tegra210 and Tegra186

Hi all,
This series implements support for HS400 signaling on Tegra210 and
Tegra186. This includes programming the DQS trimmer values, implementing
enhanced strobe and HS400 delay line calibration.

This series depends on the "Tegra SDHCI add support for HS200 and UHS
signaling" series.

Changelog:
v2:
	- Document in dt-bindings which controllers support HS400
	- Use val instead of reg in tegra_sdhci_set_dqs_trim()
	- Change "dt" to "DT" in "mmc: tegra: Parse and program DQS trim
	  value" commit message
	- Add spaces around << in tegra_sdhci_set_dqs_trim()
	- Make the "mmc: tegra: Implement HS400 enhanced strobe" commit
	  message more detailed
	- Remove a debug print from tegra_sdhci_hs400_enhanced_strobe()
	- Add blank lines around if-else-block in
	  tegra_sdhci_hs400_enhanced_strobe()
	- Use val instead of reg in tegra_sdhci_hs400_enhanced_strobe()
	- Make commit message of "mmc: tegra: Implement HS400 delay line
	  calibration" more detailed

Aapo Vienamo (8):
  dt-bindings: mmc: Add DQS trim value to Tegra SDHCI
  mmc: tegra: Parse and program DQS trim value
  mmc: tegra: Implement HS400 enhanced strobe
  mmc: tegra: Implement HS400 delay line calibration
  arm64: dts: tegra186: Add SDMMC4 DQS trim value
  arm64: dts: tegra210: Add SDMMC4 DQS trim value
  arm64: dts: tegra186: Enable HS400
  arm64: dts: tegra210: Enable HS400

 .../bindings/mmc/nvidia,tegra20-sdhci.txt          |  4 ++
 arch/arm64/boot/dts/nvidia/tegra186.dtsi           |  2 +
 arch/arm64/boot/dts/nvidia/tegra210.dtsi           |  2 +
 drivers/mmc/host/sdhci-tegra.c                     | 84 +++++++++++++++++++++-
 4 files changed, 89 insertions(+), 3 deletions(-)

-- 
2.7.4

Powered by blists - more mailing lists