linux-kernel - [PATCH v2 1/8] dt-bindings: mmc: Add DQS trim value to Tegra SDHCI

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <1533924845-1466-2-git-send-email-avienamo@nvidia.com>
Date:   Fri, 10 Aug 2018 21:13:58 +0300
From:   Aapo Vienamo <avienamo@...dia.com>
To:     Ulf Hansson <ulf.hansson@...aro.org>,
        Rob Herring <robh+dt@...nel.org>,
        Mark Rutland <mark.rutland@....com>,
        Thierry Reding <thierry.reding@...il.com>,
        Jonathan Hunter <jonathanh@...dia.com>,
        Adrian Hunter <adrian.hunter@...el.com>,
        Mikko Perttunen <mperttunen@...dia.com>
CC:     <linux-mmc@...r.kernel.org>, <devicetree@...r.kernel.org>,
        <linux-tegra@...r.kernel.org>, <linux-kernel@...r.kernel.org>,
        Aapo Vienamo <avienamo@...dia.com>
Subject: [PATCH v2 1/8] dt-bindings: mmc: Add DQS trim value to Tegra SDHCI

Document HS400 DQS trim value device tree property.

Signed-off-by: Aapo Vienamo <avienamo@...dia.com>
---
 Documentation/devicetree/bindings/mmc/nvidia,tegra20-sdhci.txt | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/Documentation/devicetree/bindings/mmc/nvidia,tegra20-sdhci.txt b/Documentation/devicetree/bindings/mmc/nvidia,tegra20-sdhci.txt
index edecf97..32b4b4e 100644
--- a/Documentation/devicetree/bindings/mmc/nvidia,tegra20-sdhci.txt
+++ b/Documentation/devicetree/bindings/mmc/nvidia,tegra20-sdhci.txt
@@ -71,6 +71,7 @@ Optional properties for Tegra210 and Tegra186:
   trimmer value for non-tunable modes.
 - nvidia,default-trim : Specify the default outbound clock trimmer
   value.
+- nvidia,dqs-trim : Specify DQS trim value for HS400 timing
 
   Notes on the pad calibration pull up and pulldown offset values:
     - The property values are drive codes which are programmed into the
@@ -87,6 +88,9 @@ Optional properties for Tegra210 and Tegra186:
     - The values are programmed to the Vendor Clock Control Register.
       Please refer to the reference manual of the SoC for correct
       values.
+    - The DQS trim values are only used on controllers which support
+      HS400 timing. Only SDMMC4 on Tegra210 and Tegra 186 supports
+      HS400.
 
 Example:
 sdhci@...b0000 {
-- 
2.7.4