lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-Id: <20180816084315.7857-2-esben.haabendal@gmail.com>
Date:   Thu, 16 Aug 2018 10:43:12 +0200
From:   Esben Haabendal <esben.haabendal@...il.com>
To:     linux-i2c@...r.kernel.org
Cc:     Esben Haabendal <eha@...f.com>,
        Wolfram Sang <wsa+renesas@...g-engineering.com>,
        Uwe Kleine-König 
        <u.kleine-koenig@...gutronix.de>,
        Lucas Stach <l.stach@...gutronix.de>,
        Phil Reid <preid@...ctromag.com.au>,
        Fabio Estevam <fabio.estevam@....com>,
        Peter Rosin <peda@...ntia.se>, linux-kernel@...r.kernel.org
Subject: [PATCH v4 1/3] i2c: imx: Fix race condition in dma read

From: Esben Haabendal <eha@...f.com>

This fixes a race condition, where the DMAEN bit ends up being set after
I2C slave has transmitted a byte following the dummy read.  When that
happens, an interrupt is generated instead, and no DMA request is generated
to kickstart the DMA read, and a timeout happens after DMA_TIMEOUT (1 sec).

Fixed by setting the DMAEN bit before the dummy read.

Signed-off-by: Esben Haabendal <eha@...f.com>
Acked-by: Uwe Kleine-König <u.kleine-koenig@...gutronix.de>
---
 drivers/i2c/busses/i2c-imx.c | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/drivers/i2c/busses/i2c-imx.c b/drivers/i2c/busses/i2c-imx.c
index 498c5e891649..ad6adefb64da 100644
--- a/drivers/i2c/busses/i2c-imx.c
+++ b/drivers/i2c/busses/i2c-imx.c
@@ -668,9 +668,6 @@ static int i2c_imx_dma_read(struct imx_i2c_struct *i2c_imx,
 	struct imx_i2c_dma *dma = i2c_imx->dma;
 	struct device *dev = &i2c_imx->adapter.dev;
 
-	temp = imx_i2c_read_reg(i2c_imx, IMX_I2C_I2CR);
-	temp |= I2CR_DMAEN;
-	imx_i2c_write_reg(temp, i2c_imx, IMX_I2C_I2CR);
 
 	dma->chan_using = dma->chan_rx;
 	dma->dma_transfer_dir = DMA_DEV_TO_MEM;
@@ -783,6 +780,7 @@ static int i2c_imx_read(struct imx_i2c_struct *i2c_imx, struct i2c_msg *msgs, bo
 	int i, result;
 	unsigned int temp;
 	int block_data = msgs->flags & I2C_M_RECV_LEN;
+	int use_dma = i2c_imx->dma && msgs->len >= DMA_THRESHOLD && !block_data;
 
 	dev_dbg(&i2c_imx->adapter.dev,
 		"<%s> write slave address: addr=0x%x\n",
@@ -809,12 +807,14 @@ static int i2c_imx_read(struct imx_i2c_struct *i2c_imx, struct i2c_msg *msgs, bo
 	 */
 	if ((msgs->len - 1) || block_data)
 		temp &= ~I2CR_TXAK;
+	if (use_dma)
+		temp |= I2CR_DMAEN;
 	imx_i2c_write_reg(temp, i2c_imx, IMX_I2C_I2CR);
 	imx_i2c_read_reg(i2c_imx, IMX_I2C_I2DR); /* dummy read */
 
 	dev_dbg(&i2c_imx->adapter.dev, "<%s> read data\n", __func__);
 
-	if (i2c_imx->dma && msgs->len >= DMA_THRESHOLD && !block_data)
+	if (use_dma)
 		return i2c_imx_dma_read(i2c_imx, msgs, is_lastmsg);
 
 	/* read data */
-- 
2.18.0

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ