linux-kernel - [PATCH 0/2] GPIO: add single-register gpio via creg driver

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [thread-next>] [day] [month] [year] [list]

Message-Id: <20180823150013.21837-1-Eugeniy.Paltsev@synopsys.com>
Date:   Thu, 23 Aug 2018 18:00:11 +0300
From:   Eugeniy Paltsev <Eugeniy.Paltsev@...opsys.com>
To:     linux-snps-arc@...ts.infradead.org, linux-gpio@...r.kernel.org
Cc:     linux-kernel@...r.kernel.org,
        Vineet Gupta <Vineet.Gupta1@...opsys.com>,
        Alexey Brodkin <Alexey.Brodkin@...opsys.com>,
        Linus Walleij <linus.walleij@...aro.org>,
        Rob Herring <robh+dt@...nel.org>, devicetree@...r.kernel.org,
        Mark Rutland <mark.rutland@....com>,
        Eugeniy Paltsev <Eugeniy.Paltsev@...opsys.com>
Subject: [PATCH 0/2] GPIO: add single-register gpio via creg driver

Add single-register MMIO gpio driver for complex cases where
only several fields in register belong to GPIO and each GPIO
owns field with different length and on/off values.

Here is the example:

31            11        8         7        5         0   < bit number
|              |        |         |        |         |
[   not used   | gpio-1 | shift-1 | gpio-0 | shift-0 ]   < 32 bit MMIO
                   ^                  ^
                (3 bit)            (2 bit)
                   |                  |
                   |                  |
                   |           write 0x2 == set output to "1" (on)
                   |           write 0x3 == set output to "0" (off)
                   |
            write 0x1 == set output to "1" (on)
            write 0x4 == set output to "0" (off)

This is different from gpio-reg, gpio-mmio and gpio-74xx-mmio:
* They all don't support cases when GPIO output register have
  more than one bit per GPIO line.
* They don't support holes in MMIO register.
* They don't support cases when GPIO lines have different on/off
  values.

This driver supports GPIOs via CREG on various Synopsys SoCs/boards.

Eugeniy Paltsev (2):
  GPIO: add single-register gpio via creg driver
  dt-bindings: Document the Synopsys GPIO via CREG bindings

 .../devicetree/bindings/gpio/snps,creg-gpio.txt    |  48 ++++
 MAINTAINERS                                        |   6 +
 drivers/gpio/Kconfig                               |   9 +
 drivers/gpio/Makefile                              |   1 +
 drivers/gpio/gpio-creg-snps.c                      | 242 +++++++++++++++++++++
 5 files changed, 306 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/gpio/snps,creg-gpio.txt
 create mode 100644 drivers/gpio/gpio-creg-snps.c

-- 
2.14.4