[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-Id: <cover.1535462942.git.amit.kucheria@linaro.org>
Date: Tue, 28 Aug 2018 19:08:29 +0530
From: Amit Kucheria <amit.kucheria@...aro.org>
To: linux-kernel@...r.kernel.org
Cc: rnayak@...eaurora.org, linux-arm-msm@...r.kernel.org,
bjorn.andersson@...aro.org, edubezval@...il.com,
smohanad@...eaurora.org, andy.gross@...aro.org,
dianders@...omium.org, mka@...omium.org,
"David S. Miller" <davem@...emloft.net>,
Andrew Morton <akpm@...ux-foundation.org>,
Arnd Bergmann <arnd@...db.de>,
Daniel Lezcano <daniel.lezcano@...aro.org>,
Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
Mauro Carvalho Chehab <mchehab+samsung@...nel.org>,
devicetree@...r.kernel.org, linux-pm@...r.kernel.org,
linux-soc@...r.kernel.org
Subject: [PATCH v2 00/11] Another round of tsens cleanups
This is another series of tsens cleanups before we add interrupt support. This applies on top of 4.19-rc1.
In this series, we have the following:
- splitup 8916 and 8974 register address spaces for SROT and TM
- cleanups: move to spdx, dead code removal, removal of id field
- Add support to map the SROT address space for DTs that list it separately
- Check if TSENS IP is enabled in firmware by querying the SROT space
- Add reg-names property to get more readable outputs in /proc/iomem
- Add myself as maintainer of tsens
Changes since v1:
- Split up changes that split the address space and added qcom,sensors
property into two separate patches
- Remove brackets in typo correction patch
Amit Kucheria (11):
arm/arm64: dts: msm8974/msm8916: thermal: Split address space into two
arm/arm64: dts: msm8974/msm8916: thermal: Add "qcom,sensors" property
dt-bindings: thermal: Fix a typo in documentation
thermal: tsens: Add SPDX license identifiers
thermal: tsens: Get rid of dead code
thermal: tsens: Rename map field in order to add a second address map
thermal: tsens: Add the SROT address map
thermal: tsens: Check if the IP is correctly enabled by firmware
thermal: tsens: Get rid of 'id' field
arm64: dts: qcom: Add reg-names for all tsens nodes
MAINTAINERS: Add entry for Qualcomm TSENS thermal drivers
.../devicetree/bindings/thermal/thermal.txt | 2 +-
MAINTAINERS | 7 +++
arch/arm/boot/dts/qcom-msm8974.dtsi | 7 ++-
arch/arm64/boot/dts/qcom/msm8916.dtsi | 7 ++-
arch/arm64/boot/dts/qcom/msm8996.dtsi | 2 +
arch/arm64/boot/dts/qcom/sdm845.dtsi | 2 +
drivers/thermal/qcom/tsens-8916.c | 11 +---
drivers/thermal/qcom/tsens-8960.c | 41 +++++-------
drivers/thermal/qcom/tsens-8974.c | 11 +---
drivers/thermal/qcom/tsens-common.c | 62 ++++++++++++-------
drivers/thermal/qcom/tsens-v2.c | 6 +-
drivers/thermal/qcom/tsens.c | 21 +------
drivers/thermal/qcom/tsens.h | 24 +++----
13 files changed, 99 insertions(+), 104 deletions(-)
--
2.17.1
Powered by blists - more mailing lists